File:Design of oviraptorid incubation experiments.webp
From HandWiki
Size of this PNG preview of this WEBP file: 278 × 419 pixels. Other resolution: 209 × 315 pixels.
Original file (1,299 × 1,959 pixels, file size: 949 KB, MIME type: image/webp)
Summary
| Description | The design of the incubation experiments. (A) The arrangement of thermometers in the incubation experiments. Thermometers 1 (with thicker outlines) were used in Experiment II. Thermometers 2 (with lighter outlines) were the additional thermometers used in Experiment III. The schematic presents a lateral view of the clutch and the incubator. (B) The actual setup of Experiment II (without blanket). The thermometers were collectively placed on labeled cardboard. Pictures of the readings of the thermometers were taken during data collection. (C) A computer-rendered graphic depicting the arrangement of air temperature measurers in Experiment III. There were four measurers inside the clutch and three outside. The ones inside measured air temperature at heights of 0 cm, 12 cm, and 18 cm above the ground. The ones outside measured air temperature at heights of 12 cm and 18 cm above the ground. The red eggs represent the outer-ring eggs, whereas the green eggs represent the inner-ring eggs. (D) A photograph of the generalized clutch after Experiment III. |
| Date | |
| Source | https://www.frontiersin.org/journals/ecology-and-evolution/articles/10.3389/fevo.2026.1351288/full |
| Author | Chun-Yu Su, Jun-Yang Liao, Hsiao-Jou Wu, Kuan-Yu Chou, Ching Chen, Ming-Tsang Lee, Tzu-Ruei Yang |
Licensing
This file is licensed under the Creative Commons Attribution 4.0 International license.
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 13:12, 29 April 2026 | | 1,299 × 1,959 (949 KB) | imagescommonswiki>FunkMonk | {{Information |Description=The design of the incubation experiments. (A) The arrangement of thermometers in the incubation experiments. Thermometers 1 (with thicker outlines) were used in Experiment II. Thermometers 2 (with lighter outlines) were the additional thermometers used in Experiment III. The schematic presents a lateral view of the clutch and the incubator. (B) The actual setup of Experiment II (without blanket). The thermometers were collectively placed on labeled cardboard. Pictur... |
File usage
The following file is a duplicate of this file (more details):
- File:Design of oviraptorid incubation experiments.webp from Wikimedia Commons
The following 2 pages use this file:
