RepRap Fisher
From HandWiki
 RepRap Fisher delta 3D printer | |
| File:Robot 3D print timelapse on RepRapPro Fisher.webm A timelapse video of a Fisher printing a robot model (logo of Make magazine) | |
| Classification | Fused deposition modeling 3D printer |
|---|---|
| Inventor | RepRapPro |
The RepRap Fisher is an open-source fused deposition modeling 3D printer and is part of the RepRap project. The RepRap Fisher is named after the English statistician and biologist Ronald Fisher, it was designed by RepRapPro.[1]
The RepRap Fisher has a 150mm diameter by 180mm height build volume, uses a bowden extruder and has a print resolution of 12.5um in all directions, it also has a micro SD card and USB and Ethernet connections allowing it to be connected to a network.[2][3] The printer was praised for its ease of construction and low price and is only available in kit form.[2][4]
See also
References
- ↑ "Fisher - RepRapWiki". http://reprap.org/wiki/Fisher.
- ↑ 2.0 2.1 "Fisher Delta 3D Printer is Released for Just £199 by RepRapPro" (in en-US). 2015-05-23. https://3dprint.com/67821/fisher-delta-3d-printer/.
- ↑ "£199 Fisher Delta 3D Printer Launched By RepRapPro" (in en-US). 2015-05-25. http://www.geeky-gadgets.com/199-fisher-delta-3d-printer-launched-by-reprappro-25-05-2015/.
- ↑ says, Solidwork (2015-05-28). "RepRapPro launches a $300 Delta 3D printer". http://blog.atmel.com/2015/05/28/reprappro-launches-a-300-delta-3d-printer/.
External links
- eMaker RepRap Fisher kits
- RepRap Fisher page on RepRap.org
- Open Source repository on Github by eMaker
- Open Source repository on Github by RepRapPro (no longer under active development)
 |
