SUPS

From HandWiki
(Redirected from Synaptic update rate)
Short description: Measure of neuronal network performance

In computational neuroscience, SUPS (for Synaptic Updates Per Second) or formerly CUPS (Connections Updates Per Second) is a measure of a neuronal network performance, useful in fields of neuroscience, cognitive science, artificial intelligence, and computer science.

Computing

For a processor or computer designed to simulate a neural network SUPS is measured as the product of simulated neurons [math]\displaystyle{ N }[/math] and average connectivity [math]\displaystyle{ c }[/math](synapses) per neuron per second:

[math]\displaystyle{ SUPS = c \times N }[/math]

Depending on the type of simulation it is usually equal to the total number of synapses simulated.

In an "asynchronous" dynamic simulation if a neuron spikes at [math]\displaystyle{ \upsilon }[/math] Hz, the average rate of synaptic updates provoked by the activity of that neuron is [math]\displaystyle{ \upsilon cN }[/math]. In a synchronous simulation with step [math]\displaystyle{ \Delta t }[/math] the number of synaptic updates per second would be [math]\displaystyle{ \frac{cN}{\Delta t} }[/math]. As [math]\displaystyle{ \Delta t }[/math] has to be chosen much smaller than the average interval between two successive afferent spikes, which implies [math]\displaystyle{ \Delta t \lt \frac{1}{\upsilon N} }[/math], giving an average of synaptic updates equal to [math]\displaystyle{ \upsilon c N^2 }[/math]. Therefore, spike-driven synaptic dynamics leads to a linear scaling of computational complexity O(N) per neuron, compared with the O(N2) in the "synchronous" case.[1]

Records

Developed in the 1980s Adaptive Solutions' CNAPS-1064 Digital Parallel Processor chip is a full neural network (NNW). It was designed as a coprocessor to a host and has 64 sub-processors arranged in a 1D array and operating in a SIMD mode. Each sub-processor can emulate one or more neurons and multiple chips can be grouped together. At 25 MHz it is capable of 1.28 GMAC.[2]

After the presentation of the RN-100 (12 MHz) single neuron chip at Seattle 1991 Ricoh developed the multi-neuron chip RN-200. It had 16 neurons and 16 synapses per neuron. The chip has on-chip learning ability using a proprietary backdrop algorithm. It came in a 257-pin PGA encapsulation and drew 3.0 W at a maximum. It was capable of 3 GCPS (1 GCPS at 32 MHz). [3]

In 1991–97, Siemens developed the MA-16 chip, SYNAPSE-1 and SYNAPSE-3 Neurocomputer. The MA-16 was a fast matrix-matrix multiplier that can be combined to form systolic arrays. It could process 4 patterns of 16 elements each (16-bit), with 16 neuron values (16-bit) at a rate of 800 MMAC or 400 MCPS at 50 MHz. The SYNAPSE3-PC PCI card contained 2 MA-16 with a peak performance of 2560 MOPS (1.28 GMAC); 7160 MOPS (3.58 GMAC) when using three boards.[4]

In 2013, the K computer was used to simulate a neural network of 1.73 billion neurons with a total of 10.4 trillion synapses (1% of the human brain). The simulation ran for 40 minutes to simulate 1 s of brain activity at a normal activity level (4.4 on average). The simulation required 1 Petabyte of storage.[5]

See also

References

  1. Maurizio Mattia; Paolo Del Giudice (1998). "Asynchronous simulation of large networks of spiking neurons and dynamical synapses". Icann 98. Perspectives in Neural Computing. pp. 1045–1050. doi:10.1007/978-1-4471-1599-1_164. ISBN 978-3-540-76263-8. 
  2. Real-Time Computing: Implications for General Microprocessors Chip Weems, Steve Dropsho
  3. L. Almeida; Luis B. Almeida; S. Boverie (2003). Intelligent Components and Instruments For Control Applications 2003 (SICICA 2003). ISBN 9780080440101. https://books.google.com/books?id=pDFdub32IdYC. 
  4. Neural Network Hardware Clark S. Lindsey, Bruce Denby, Thomas Lindblad, 1998
  5. Fujitsu supercomputer simulates 1 second of brain activity Tim Hornyak, CNET, August 5, 2013