View source for Physics:Mach–Zehnder interferometer

{{Short description|Device to determine relative phase shift}}
{{Quantum mechanics|cTopic=Experiments}}
[[File:Mach Zehnder interferometer alternate candle images.svg|thumb|350px|Figure 1. The Mach&ndash;Zehnder interferometer is frequently used in the fields of aerodynamics, plasma physics and heat transfer to measure pressure, density, and temperature changes in gases. In this figure, we imagine analyzing a candle flame. Either output image may be monitored.]]

The '''Mach–Zehnder interferometer''' is a device used to determine the relative [[Physics:Phase (waves)|phase shift]] variations between two collimated beams derived by splitting light from a single source. The interferometer has been used, among other things, to measure phase shifts between the two beams caused by a sample or a change in length of one of the paths. The apparatus is named after the physicists Ludwig Mach (the son of [[Biography:Ernst Mach|Ernst Mach]]) and [[Biography:Ludwig Zehnder|Ludwig Zehnder]]; Zehnder's proposal in an 1891 article<ref>{{cite journal|last=Zehnder|first=Ludwig|title=Ein neuer Interferenzrefraktor|journal=Zeitschrift für Instrumentenkunde|date=1891|volume=11|pages=275&ndash;285|url=https://archive.org/details/zeitschriftfrin11gergoog}}</ref> was refined by Mach in an 1892 article.<ref>{{cite journal|last=Mach|first=Ludwig|title=Ueber einen Interferenzrefraktor|journal=Zeitschrift für Instrumentenkunde | volume = 12 | date = 1892 | pages = 89–93|url=https://archive.org/details/zeitschriftfrin14gergoog}}</ref> Demonstrations of Mach–Zehnder [[Astronomy:Interferometry|interferometry]] with particles other than photons (particles of light) had been demonstrated as well in multiple experiments.<ref>{{Cite journal|last1=Ji|first1=Yang|last2=Chung|first2=Yunchul|last3=Sprinzak|first3=D.|last4=Heiblum|first4=M.|last5=Mahalu|first5=D.|last6=Shtrikman|first6=Hadas|date=March 2003|title=An electronic Mach–Zehnder interferometer | url = http://www.nature.com/articles/nature01503|journal=Nature | language = en | volume = 422 | issue = 6930 | pages = 415–418 | doi = 10.1038/nature01503 | pmid = 12660779 | issn=0028-0836 | arxiv = cond-mat/0303553 |bibcode=2003Natur.422..415J|s2cid=4425291}}</ref>

The versatility of the Mach–Zehnder configuration has led to its being used in a wide range of fundamental research topics in quantum mechanics, including studies on [[Physics:Counterfactual definiteness|counterfactual definiteness]], [[Quantum entanglement|quantum entanglement]], quantum computation, [[Quantum cryptography|quantum cryptography]], [[Physics:Quantum logic|quantum logic]], [[Elitzur–Vaidman bomb tester]], the [[Physics:Quantum eraser experiment|quantum eraser experiment]], the [[Physics:Quantum Zeno effect|quantum Zeno effect]], and [[Physics:Neutron diffraction|neutron diffraction]]. In optical telecommunications it is used as an [[Physics:Electro-optic modulator|electro-optic modulator]] for phase and amplitude modulation of light.

== Design ==
[[File:Mach-Zender interferometer fringe localization.svg|thumb|Figure 2. Localized fringes result when an extended source is used in a Mach–Zehnder interferometer. By appropriately adjusting the mirrors and beam splitters, the fringes can be localized in any desired plane.]]

The Mach&ndash;Zehnder  check interferometer is a highly configurable instrument. In contrast to the well-known [[Physics:Michelson interferometer|Michelson interferometer]], each of the well-separated light paths is traversed only once.

If the source has a low [[Physics:Coherence|coherence length]] then great care must be taken to equalize the two optical paths. White light in particular requires the optical paths to be simultaneously equalized over all [[Wavelength|wavelengths]], or no [[Physics:Wave interference|fringes]] will be visible (unless a monochromatic filter is used to isolate a single wavelength). As seen in Fig.&nbsp;1, a compensating cell made of the same type of glass as the test cell (so as to have equal [[Physics:Dispersion (optics)|optical dispersion]]) would be placed in the path of the reference beam to match the test cell. Note also the precise orientation of the [[Physics:Beam splitter|beam splitter]]s. The reflecting surfaces of the beam splitters would be oriented so that the test and reference beams pass through an equal amount of glass. In this orientation, the test and reference beams each experience two front-surface reflections, resulting in the same number of phase inversions. The result is that light travels through an equal optical path length in both the test and reference beams leading to constructive interference.<ref name="Zetie">{{cite web|url=http://www.cs.princeton.edu/courses/archive/fall06/cos576/papers/zetie_et_al_mach_zehnder00.pdf|title=How does a Mach–Zehnder interferometer work?|last=Zetie|first=K. P.; Adams, S. F.; Tocknell, R. M.|publisher=Physics Department, Westminster School, London|access-date=8 April 2012}}</ref><ref name="Ashkenas1950">{{cite thesis|last=Ashkenas|first=Harry I.|url=https://thesis.library.caltech.edu/1483/|title=The design and construction of a Mach–Zehnder interferometer for use with the GALCIT Transonic Wind Tunnel. Engineer's thesis|date=1950|publisher=[[Organization:California Institute of Technology|California Institute of Technology]]|doi=10.7907/D0V1-MJ80|type=engd}}</ref>

Collimated sources result in a nonlocalized fringe pattern. Localized fringes result when an extended source is used. In Fig.&nbsp;2, we see that the fringes can be adjusted so that they are localized in any desired plane.<ref name=HariharanBasics2007>{{cite book |last=Hariharan |first=P. |title=Basics of Interferometry |date=2007|publisher=Elsevier Inc. |isbn=978-0-12-373589-8}}</ref>{{rp|18}} In most cases, the fringes would be adjusted to lie in the same plane as the test object, so that fringes and test object can be photographed together.

== Operation ==
right|thumb|350px|Figure 3. Effect of a sample on the phase of the output beams in a Mach–Zehnder interferometer

The collimated beam is split by a half-silvered mirror.  The two resulting beams (the "sample beam" and the "reference beam") are each reflected by a [[Physics:Mirror|mirror]].  The two beams then pass a second half-silvered mirror and enter two detectors.

The [[Physics:Fresnel equations|Fresnel equations]] for reflection and transmission of a wave at a dielectric imply that there is a phase change for a reflection, when a wave propagating in a lower-[[Physics:Refractive index|refractive index]] medium reflects from a higher-refractive index medium, but not in the opposite case. A 180° phase shift occurs upon reflection from the front of a mirror, since the medium behind the mirror (glass) has a higher refractive index than the medium the light is traveling in (air). No phase shift accompanies a rear-surface reflection, since the medium behind the mirror (air) has a lower refractive index than the medium the light is traveling in (glass).

The speed of light is lower in media with an index of refraction greater than that of a vacuum, which is&nbsp;1.  Specifically, its speed is: ''v''&nbsp;=&nbsp;''c''/''n'', where ''c'' is the speed of light in vacuum, and ''n'' is the index of refraction.  This causes a phase shift increase proportional to (''n''&nbsp;−&nbsp;1)&nbsp;×&nbsp;''length traveled''. If ''k'' is the constant phase shift incurred by passing through a glass plate on which a mirror resides, a total of 2''k'' phase shift occurs when reflecting from the rear of a mirror. This is because light traveling toward the rear of a mirror will enter the glass plate, incurring ''k'' phase shift, and then reflect from the mirror with no additional phase shift, since only air is now behind the mirror, and travel again back through the glass plate, incurring an additional ''k'' phase shift.

The rule about phase shifts applies to beamsplitters constructed with a [[Physics:Dielectric|dielectric]] coating and must be modified if a metallic coating is used or when different [[Physics:Polarization (waves)|polarizations]] are taken into account. Also, in real interferometers, the thicknesses of the beamsplitters may differ, and the path lengths are not necessarily equal. Regardless, in the absence of absorption, conservation of energy guarantees that the two paths must differ by a half-wavelength phase shift. Also beamsplitters that are not 50/50 are frequently employed to improve the interferometer's performance in certain types of measurement.<ref name=Zetie/>

In Fig.&nbsp;3, in the absence of a sample, both the sample beam (SB) and the reference beam (RB) will arrive in phase at detector&nbsp;1, yielding constructive interference. Both SB and RB will have undergone a phase shift of (1 &times; wavelength&nbsp;+&nbsp;''k'') due to two front-surface reflections and one transmission through a glass plate. At detector&nbsp;2, in the absence of a sample, the sample beam and reference beam will arrive with a phase difference of half a wavelength, yielding complete destructive interference. The RB arriving at detector&nbsp;2 will have undergone a phase shift of (0.5 &times; wavelength&nbsp;+&nbsp;2''k'') due to one front-surface reflection and two transmissions.  The SB arriving at detector&nbsp;2 will have undergone a (1 &times; wavelength&nbsp;+&nbsp;2''k'') phase shift due to two front-surface reflections, one rear-surface reflection.  Therefore, when there is no sample, only detector&nbsp;1 receives light. If a sample is placed in the path of the sample beam, the intensities of the beams entering the two detectors will change, allowing the calculation of the phase shift caused by the sample.

== Quantum treatment ==

We can model a photon going through the interferometer by assigning a probability amplitude to each of the two possible paths: the "lower" path which starts from the left, goes straight through both beam splitters, and ends at the top, and the "upper" path which starts from the bottom, goes straight through both beam splitters, and ends at the right. The quantum state describing the photon is therefore a vector <math>\psi \in \mathbb{C}^2</math> that is a superposition of the "lower" path <math>\psi_l = \begin{pmatrix} 1 \\ 0 \end{pmatrix}</math> and the "upper" path <math>\psi_u = \begin{pmatrix} 0 \\ 1 \end{pmatrix}</math>, that is, <math>\psi = \alpha \psi_l + \beta \psi_u</math> for complex <math>\alpha,\beta</math> such that <math>|\alpha|^2+|\beta|^2 = 1</math>.

Both [[Physics:Beam splitter|beam splitter]]s are modelled as the unitary matrix <math>B = \frac1{\sqrt2}\begin{pmatrix} 1 & i \\ i & 1 \end{pmatrix}</math>, which means that when a photon meets the beam splitter it will either stay on the same path with a probability amplitude of <math>1/\sqrt{2}</math>, or be reflected to the other path with a probability amplitude of <math>i/\sqrt{2}</math>. The phase shifter on the upper arm is modelled as the unitary matrix <math>P = \begin{pmatrix} 1 & 0 \\ 0 & e^{i\Delta\Phi} \end{pmatrix}</math>, which means that if the photon is on the "upper" path it will gain a relative phase of <math>\Delta\Phi</math>, and it will stay unchanged if it is on the lower path.

A photon that enters the interferometer from the left will then end up described by the state

: <math>BPB\psi_l = ie^{i\Delta\Phi/2} \begin{pmatrix} -\sin(\Delta\Phi/2) \\ \cos(\Delta\Phi/2) \end{pmatrix},</math>
and the probabilities that it will be detected at the right or at the top are given respectively by
: <math> p(u) = |\langle \psi_u| BPB|\psi_l \rangle|^2 = \cos^2 \frac{\Delta \Phi}{2},</math>
: <math> p(l) = |\langle \psi_l| BPB|\psi_l \rangle|^2 = \sin^2 \frac{\Delta \Phi}{2}.</math>

One can therefore use the Mach–Zehnder interferometer to estimate the [[Physics:Phase (waves)|phase shift]] by estimating these probabilities.

It is interesting to consider what would happen if the photon were definitely in either the "lower" or "upper" paths between the beam splitters. This can be accomplished by blocking one of the paths, or equivalently by removing the first beam splitter (and feeding the photon from the left or the bottom, as desired). In both cases there will no longer be interference between the paths, and the probabilities are given by <math>p(u)=p(l) = 1/2</math>, independently of the phase <math>\Delta\Phi</math>. From this we can conclude that the photon does not take one path or another after the first beam splitter, but rather that it must be described by a genuine quantum superposition of the two paths.<ref name="vedral">{{cite book |first=Vlatko |last=Vedral |title=Introduction to Quantum Information Science |date=2006 |publisher=Oxford University Press |isbn=9780199215706 |oclc=442351498 |}}</ref>

== Uses ==

The Mach&ndash;Zehnder interferometer's relatively large and freely accessible working space, and its flexibility in locating the fringes has made it the interferometer of choice for [[Flow visualization|visualizing flow]] in wind tunnels<ref name=Chevalerias1957>{{Cite journal | last1 = Chevalerias | first1 = R. | last2 = Latron | first2 = Y. | last3 = Veret | first3 = C. | doi = 10.1364/JOSA.47.000703 | title = Methods of Interferometry Applied to the Visualization of Flows in Wind Tunnels | journal = Journal of the Optical Society of America | volume = 47 | issue = 8 | pages = 703 | year = 1957 | bibcode = 1957JOSA...47..703C }}</ref><ref name=Ristic>{{cite web |last=Ristić |first=Slavica |title=Flow visualization techniques in wind tunnels – optical methods (Part II) |url=http://www.vti.mod.gov.rs/ntp/rad2007/2-07/rist/rist.pdf |publisher=Military Technical Institute, Serbia |access-date=6 April 2012}}</ref> and for flow visualization studies in general. It is frequently used in the fields of aerodynamics, [[Physics:Plasma physics|plasma physics]] and [[Physics:Heat transfer|heat transfer]] to measure pressure, density, and temperature changes in gases.<ref name=HariharanBasics2007/>{{rp|18,93&ndash;95}}

Mach&ndash;Zehnder interferometers are used in [[Physics:Electro-optic modulator|electro-optic modulator]]s, electronic devices used in various [[Physics:Fiber-optic communication|fiber-optic communication]] applications. Mach–Zehnder modulators are incorporated in monolithic [[Engineering:Integrated circuit|integrated circuit]]s and offer well-behaved, high-bandwidth electro-optic amplitude and phase responses over a multiple-gigahertz frequency range.

Mach&ndash;Zehnder interferometers are also used to study one of the most counterintuitive predictions of quantum mechanics, the phenomenon known as [[Quantum entanglement|quantum entanglement]].<ref name=Paris1999>{{cite journal |last=Paris |first=M. G. A. |title=Entanglement and visibility at the output of a Mach–Zehnder interferometer |journal=Physical Review A |date=1999 |volume=59 |issue=2 |pages=1615&ndash;1621 |url=http://qinf.fisica.unimi.it/~paris/PDF/visent.pdf |access-date=2 April 2012 |arxiv=quant-ph/9811078 |bibcode=1999PhRvA..59.1615P |doi=10.1103/PhysRevA.59.1615 |s2cid=13963928 |archive-url=https://web.archive.org/web/20160910074215/http://qinf.fisica.unimi.it/~paris/PDF/visent.pdf |archive-date=10 September 2016 |url-status=dead }}</ref><ref name=Haack2010>{{Cite journal | last1 = Haack | first1 = G. R. | last2 = Förster | first2 = H. | last3 = Büttiker | first3 = M. | title = Parity detection and entanglement with a Mach-Zehnder interferometer | doi = 10.1103/PhysRevB.82.155303 | journal = Physical Review B | volume = 82 | issue = 15 | pages = 155303 | year = 2010 |arxiv = 1005.3976 |bibcode = 2010PhRvB..82o5303H | s2cid = 119261326 }}</ref>

The possibility to easily control the features of the light in the reference channel without disturbing the light in the object channel popularized the Mach&ndash;Zehnder configuration in [[Physics:Holographic interferometry|holographic interferometry]]. In particular, [[Optical heterodyne detection|optical heterodyne detection]] with an off-axis, frequency-shifted reference beam ensures good experimental conditions for shot-noise limited holography with video-rate cameras,<ref>{{cite journal |author=Michel Gross |author2=Michael Atlan |title=Digital holography with ultimate sensitivity|journal=Optics Letters|volume=32 |issue=8 |pages=909–911 |year=2007 |arxiv = 0803.3076 |bibcode = 2007OptL...32..909G |doi = 10.1364/OL.32.000909 |pmid=17375150 |s2cid=6361448 }}</ref> vibrometry,<ref>{{cite journal |author=Francois Bruno |author2=Jérôme Laurent |author3=Daniel Royer |author4=Michael Atlan |title=Holographic imaging of surface acoustic waves |journal=Applied Physics Letters|volume=104 |issue=1 |pages=083504 |year=2014 |arxiv=1401.5344 |bibcode = 2014ApPhL.104a3504Y |doi = 10.1063/1.4861116 }}</ref> and laser Doppler imaging of blood flow.<ref>{{cite journal |author=Caroline Magnain |author2= Amandine Castel |author3= Tanguy Boucneau |author4= Manuel Simonutti |author5= Isabelle Ferezou |author6= Armelle Rancillac |author7= Tania Vitalis |author8= José-Alain Sahel |author9= Michel Paques |author10=Michael Atlan |title=Holographic imaging of surface acoustic waves |journal=Journal of the Optical Society of America A |volume=31 |issue= 12|pages=2723–2735 |year=2014 |doi = 10.1364/JOSAA.31.002723|pmid= 25606762 |arxiv = 1412.0580 |bibcode = 2014JOSAA..31.2723M |s2cid= 42373720 }}</ref>

== See also ==

* [[Astronomy:Interferometry|Interferometry]]
* [[Physics:List of types of interferometers|List of types of interferometers]]
* [[Schlieren photography]]
* [[Shadowgraph]]

== References ==
{{refs}}

[[Category:Interferometers]]
{{DEFAULTSORT:Mach-Zehnder interferometer}}

{{Sourceattribution|Mach–Zehnder interferometer}}