View source for Sample size determination

{{Short description|Statistical way determining sample size of population}}
'''Sample size determination''' or '''estimation''' is the act of choosing the number of observations or [[Replication (statistics)|replicates]] to include in a statistical sample. The sample size is an important feature of any empirical study in which the goal is to make [[Statistical inference|inferences]] about a [[Statistical population|population]] from a sample. In practice, the sample size used in a study is usually determined based on the cost, time, or convenience of collecting the data, and the need for it to offer sufficient statistical power. In complex studies, different sample sizes may be allocated, such as in stratified surveys or experimental designs with multiple treatment groups. In a [[Census|census]], data is sought for an entire population, hence the intended sample size is equal to the population. In experimental design, where a study may be divided into different treatment groups, there may be different sample sizes for each group.

Sample sizes may be chosen in several ways:
*using experience – small samples, though sometimes unavoidable, can result in wide [[Confidence interval|confidence interval]]s and risk of errors in [[Statistical hypothesis testing|statistical hypothesis testing]].
*using a target variance for an estimate to be derived from the sample eventually obtained, i.e., if a high precision is required (narrow confidence interval) this translates to a low target variance of the estimator.
*the use of a power target, i.e. the power of [[Statistical hypothesis testing|statistical test]] to be applied once the sample is collected.
*using a confidence level, i.e. the larger the required confidence level, the larger the sample size (given a constant precision requirement).

==Introduction==

Sample size determination is a crucial aspect of research methodology that plays a significant role in ensuring the reliability and validity of study findings. In order to influence the accuracy of estimates, the power of statistical tests, and the general robustness of the research findings, it entails carefully choosing the number of participants or data points to be included in a study.

For example, if we are conducting a survey to determine the average satisfaction level of customers regarding a new product. To determine an appropriate sample size, we  need to consider factors such as the desired level of confidence, margin of error, and variability in the responses. We might decide that we want a 95% confidence level, meaning we are 95% confident that the true average satisfaction level falls within the calculated range. We also decide on a margin of error, of ±3%, which indicates the acceptable range of difference between our sample estimate and the true population parameter. Additionally, we may have some idea of the expected variability in satisfaction levels based on previous data or assumptions.

===Importance===
Larger sample sizes generally lead to increased [[Accuracy and precision|precision]] when estimating unknown parameters. For instance, to accurately determine the prevalence of pathogen infection in a specific species of fish, it is preferable to examine a sample of 200 fish rather than 100 fish.  Several fundamental facts of mathematical statistics describe this phenomenon, including the [[Law of large numbers|law of large numbers]] and the [[Central limit theorem|central limit theorem]].

In some situations, the increase in precision for larger sample sizes is minimal, or even non-existent. This can result from the presence of systematic errors or strong [[Correlation and dependence|dependence]] in the data, or if the data follows a heavy-tailed distribution, or because the data is strongly dependent or biased.

Sample sizes may be evaluated by the quality of the resulting estimates, as follows. It is usually determined on the basis of the cost, time or convenience of data collection and the need for sufficient statistical power. For example, if a proportion is being estimated, one may wish to have the 95% [[Confidence interval|confidence interval]] be less than 0.06 units wide.  Alternatively, sample size may be assessed based on the power of a hypothesis test. For example, if we are comparing the support for a certain political candidate among women with the support for that candidate among men, we may wish to have 80% power to detect a difference in the support levels of 0.04 units.

==Estimation==
===Estimation of a proportion===
{{main|Population proportion}}
A relatively simple situation is estimation of a [[Proportionality (mathematics)|proportion]]. It is a fundamental aspect of statistical analysis, particularly when gauging the prevalence of a specific characteristic within a population For example, we may wish to estimate the proportion of residents in a community who are at least 65 years old.

The [[Estimator|estimator]] of a [[Proportionality (mathematics)|proportion]] is <math> \hat p = X/n</math>, where ''X'' is the number of 'positive' e.g., the number of people out of the ''n'' sampled people who are at least 65 years old). When the observations are independent, this estimator has a (scaled) [[Binomial distribution|binomial distribution]] (and is also the [[Sample (statistics)|sample]] [[Arithmetic mean|mean]] of data from a [[Bernoulli distribution]]). The maximum [[Variance|variance]] of this distribution is 0.25, which occurs when the true [[Parameter|parameter]] is ''p'' = 0.5. In practical applications, where the true parameter ''p'' is unknown, the maximum variance is often employed for sample size assessments.  If a reasonable estimate for p is known the quantity <math>p(1-p)</math> may be used in place of 0.25.

As the sample size ''n'' grows sufficiently large, the distribution of <math>\hat{p}</math> will be closely approximated by a [[Normal distribution|normal distribution]].<ref>NIST/[[Company:SEMATECH|SEMATECH]], [http://www.itl.nist.gov/div898/handbook/prc/section2/prc242.htm "7.2.4.2. Sample sizes required"], ''e-Handbook of Statistical Methods.''</ref> Using this and the [[Binomial distribution#Confidence intervals|Wald method for the binomial distribution]], yields a confidence interval, with Z representing the standard Z-score for the desired confidence level (e.g., 1.96 for a 95% confidence interval), in the form:

:<math>\left (\widehat p - Z\sqrt{\frac{0.25}{n}}, \quad \widehat p + Z\sqrt{\frac{0.25}{n}} \right )</math>

To determine an appropriate sample size ''n'' for estimating proportions, the equation below can be solved, where W represents the desired width of the confidence interval. The resulting sample size formula, is often applied with a conservative estimate of ''p'' (e.g., 0.5):

:<math>Z\sqrt{\frac{0.25}{n}} = W/2</math>

for ''n'', yielding the sample size
[[File:Sample size proportions.svg|thumb|sample sizes for binomial proportions given different confidence levels and margins of error]]
<math>n=\frac{Z^2}{W^2}</math> , in the case of using .5 as the most conservative estimate of the proportion.  ''(Note: W/2 = [[Margin of error|margin of error]].)''

In the figure below one can observe how sample sizes for binomial proportions change given different confidence levels and margins of error.


Otherwise, the formula would be <math>Z\sqrt{\frac{p(1-p)}{n}} = W/2</math>  , which yields   <math>n = \frac{4Z^2p(1-p)}{W^2}</math>.
For example, in estimating the proportion of the U.S. population supporting a presidential candidate with a 95% confidence interval width of 2 percentage points (0.02), a sample size of (1.96)<sup>2</sup>/ (0.02<sup>2</sup>) = 9604 is required with the margin of error in this case is 1 percentage point. It is reasonable to use the 0.5 estimate for p in this case because the presidential races are often close to 50/50, and it is also prudent to use a conservative estimate.  The [[Margin of error|margin of error]] in this case is 1 percentage point (half of 0.02).

In practice, the formula :<math>\left (\widehat p - 1.96\sqrt{\frac{0.25}{n}}, \quad \widehat p + 1.96\sqrt{\frac{0.25}{n}} \right )</math>  is commonly used to form a 95% confidence interval for the true proportion. The equation <math>4\sqrt{\frac{0.25}{n}} = W/2</math> can be solved for ''n'', providing a minimum sample size needed to meet the desired margin of error. The foregoing is commonly simplified :{{cite web|url=http://www.utdallas.edu/~ammann/stat3355/node25.html|title=Inference for Regression|work=utdallas.edu}}</ref><ref>[http://nebula.deanza.fhda.edu/~bloom/Math10/M10ConfIntNotes.pdf "Confidence Interval for a Proportion"] {{webarchive|url=https://web.archive.org/web/20110823021440/http://nebula.deanza.fhda.edu/~bloom/Math10/M10ConfIntNotes.pdf |date=2011-08-23 }}</ref> ''n''&nbsp;=&nbsp;4/''W''<sup>2</sup>&nbsp;=&nbsp;1/''B''<sup>2</sup> where ''B'' is the error bound on the estimate, i.e., the estimate is usually given as ''within ± B''. For ''B'' = 10% one requires ''n'' = 100, for ''B'' = 5% one needs ''n'' = 400, for ''B'' = 3% the requirement approximates to ''n'' = 1000, while for ''B'' = 1% a sample size of ''n'' = 10000 is required. These numbers are quoted often in news reports of [[Opinion poll|opinion poll]]s and other sample surveys. However, the results reported may not be the exact value as numbers are preferably rounded up. Knowing that the value of the ''n'' is the minimum number of [[Elementary event|sample points]] needed to acquire the desired result, the number of respondents then must lie on or above the minimum.

===Estimation of a mean===
Simply speaking, if we are trying to estimate the average time it takes for people to commute to work in a city. Instead of surveying the entire population, you can take a random sample of 100 individuals, record their commute times, and then calculate the mean (average) commute time for that sample. For example, person 1 takes 25 minutes, person 2 takes 30 minutes, ..., person 100 takes 20 minutes. Add up all the commute times and divide by the number of people in the sample (100 in this case). The result would be your estimate of the mean commute time for the entire population. This method is practical when it's not feasible to measure everyone in the population, and it provides a reasonable approximation based on a representative sample.

In a precisely mathematical way, when estimating the population mean using an independent and identically distributed (iid) sample of size ''n'', where each data value has variance ''σ''<sup>2</sup>, the standard error of the sample mean is:

:<math>\frac{\sigma}{\sqrt{n}}.</math>

This expression describes quantitatively how the estimate becomes more precise as the sample size increases.  Using the [[Central limit theorem|central limit theorem]] to justify approximating the sample mean with a normal distribution yields a confidence interval of the form

:<math> \left(\bar x - \frac{Z\sigma}{\sqrt{n}}, \quad \bar x + \frac{Z\sigma}{\sqrt{n}} \right )</math> , 
:where Z is a standard [[Standard score|Z-score]] for the desired level of confidence (1.96 for a 95% confidence interval).

To determine the sample size ''n'' required for a confidence interval of width W, with W/2 as the margin of error on each side of the sample mean, the equation

:<math> \frac{Z\sigma}{\sqrt{n}} = W/2</math> can be solved. This yields the sample size formula, for ''n'': 

<math>n = \frac{4Z^2\sigma^2}{W^2}</math>''.''

For instance, if estimating the effect of a drug on blood pressure with a 95% confidence interval that is six units wide, and the known standard deviation of blood pressure in the population is 15, the required sample size would be <math>\frac{4\times1.96^2\times15^2}{6^2} = 96.04</math>, which would be rounded up to 97, since sample sizes must be integers and must meet or exceed the calculated ''minimum'' value. Understanding these calculations is essential for researchers designing studies to accurately estimate population means within a desired level of confidence.

==Required sample sizes for hypothesis tests {{anchor|Estimating sample sizes}}==
One of the prevalent challenges faced by statisticians revolves around the task of calculating the sample size needed to attain a specified statistical power for a test, all while maintaining a pre-determined Type I error rate α, which signifies the level of significance in hypothesis testing. It yields a certain power for a test, given a predetermined. As follows, this can be estimated by pre-determined tables for certain values, by Mead's resource equation, or, more generally, by the [[Cumulative distribution function|cumulative distribution function]]:

===Tables===
{|class="wikitable" align="right"
!rowspan=2|<ref name=Kenny1987/><br />&nbsp;<br /> Power !!colspan=3| [[Effect size#Cohen.27s d|Cohen's d]]
|-
! 0.2 !! 0.5 !! 0.8
|-
! 0.25
| 84 || 14 || 6
|-
! 0.50
| 193 || 32 || 13
|-
! 0.60
| 246 || 40 || 16
|-
! 0.70
| 310 || 50 || 20
|-
! 0.80
| 393 || 64 || 26
|-
! 0.90
| 526 || 85 || 34
|-
! 0.95
| 651 || 105 || 42
|-
! 0.99
| 920 || 148 || 58
|}
The table shown on the right can be used in a two-sample t-test to estimate the sample sizes of an experimental group and a control group that are of equal size, that is, the total number of individuals in the trial is twice that of the number given, and the desired significance level is 0.05.<ref name=Kenny1987>[http://davidakenny.net/doc/statbook/chapter_13.pdf Chapter 13], page 215, in: {{cite book |author=Kenny, David A. |title=Statistics for the social and behavioral sciences |publisher=Little, Brown |location=Boston |year=1987 |isbn=978-0-316-48915-7 }}</ref> The parameters used are:
*The desired statistical power of the trial, shown in column to the left.
*Cohen's d (=&nbsp;effect size), which is the expected difference between the [[Mean|mean]]s of the target values between the experimental group and the control group, divided by the expected [[Standard deviation|standard deviation]].

===Mead's resource equation===
Mead's resource equation is often used for estimating sample sizes of laboratory animals, as well as in many other laboratory experiments. It may not be as accurate as using other methods in estimating sample size, but gives a hint of what is the appropriate sample size where parameters such as expected standard deviations or expected differences in values between groups are unknown or very hard to estimate.<ref name=Hubrecht&Kirkwood2010>{{cite book |author1=Kirkwood, James |author2=Robert Hubrecht |title=The UFAW Handbook on the Care and Management of Laboratory and Other Research Animals |publisher=Wiley-Blackwell |year=2010 |page=29 |isbn=978-1-4051-7523-4 }} [https://books.google.com/books?id=Wjr9u1AAht4C&pg=PA29 online Page 29]</ref>

All the parameters in the equation are in fact the [[Degrees of freedom (statistics)|degrees of freedom]] of the number of their concepts, and hence, their numbers are subtracted by 1 before insertion into the equation.

The equation is:<ref name=Hubrecht&Kirkwood2010/>

:<math> E = N - B - T,</math>
where:
*''N'' is the total number of individuals or units in the study (minus 1)
*''B'' is the ''blocking component'', representing environmental effects allowed for in the design (minus 1)
*''T'' is the ''treatment component'', corresponding to the number of treatment groups (including control group) being used, or the number of questions being asked (minus 1)
*''E'' is the degrees of freedom of the ''error component and'' should be somewhere between 10 and 20.

For example, if a study using laboratory animals is planned with four treatment groups (''T''=3), with eight animals per group, making 32 animals total (''N''=31), without any further [[Stratified sampling|stratification]] (''B''=0), then ''E'' would equal 28, which is above the cutoff of 20, indicating that sample size may be a bit too large, and six animals per group might be more appropriate.<ref>[http://www.isogenic.info/html/resource_equation.html Isogenic.info > Resource equation] by Michael FW Festing. Updated Sept. 2006</ref>

===Cumulative distribution function===
Let ''X<sub>i</sub>'', ''i'' = 1, 2, ..., ''n'' be independent observations taken from a [[Normal distribution|normal distribution]] with unknown mean μ and known variance σ<sup>2</sup>. Consider two hypotheses, a [[Null hypothesis|null hypothesis]]:

: <math> H_0:\mu=0 </math>

and an alternative hypothesis:

: <math> H_a:\mu=\mu^* </math>

for some 'smallest significant difference' ''μ''<sup>*</sup>&nbsp;>&nbsp;0. This is the smallest value for which we care about observing a difference. Now, for (1) to reject ''H''<sub>0</sub> with a probability of at least 1&nbsp;−&nbsp;''β'' when
''H''<sub>a</sub> is true (i.e. a power of 1&nbsp;−&nbsp;''β''), and (2) reject ''H''<sub>0</sub> with probability α when ''H''<sub>0</sub> is true, the following is necessary: 
If ''z''<sub>''α''</sub> is the upper α percentage point of the standard normal distribution, then

: <math> \Pr(\bar x >z_\alpha \sigma/\sqrt{n}\mid H_0)=\alpha </math>

and so

: 'Reject ''H''<sub>0</sub> if our sample average (<math>\bar x</math>) is more than <math>z_{\alpha}\sigma/\sqrt{n}</math>'

is a [[Philosophy:Decision rule|decision rule]] which satisfies (2). (This is a 1-tailed test.) In such a scenario, achieving this with a probability of at least 1−β when the alternative hypothesis ''H''<sub>a</sub>  is true becomes imperative. Here, the sample average originates from a Normal distribution with a mean of ''μ''<sup>*</sup>. Thus, the requirement is expressed as:

: <math> \Pr(\bar x >z_\alpha \sigma/\sqrt{n}\mid H_a)\geq 1-\beta </math>

Through careful manipulation, this can be shown (see Statistical power Example) to happen when

: <math> n \geq \left(\frac{z_\alpha+\Phi^{-1}(1-\beta)}{\mu^{*}/\sigma}\right)^2 </math>

where <math>\Phi</math> is the normal [[Cumulative distribution function|cumulative distribution function]].

==Stratified sample size==
With more complicated sampling techniques, such as [[Stratified sampling|stratified sampling]], the sample can often be split up into sub-samples. Typically, if there are ''H'' such sub-samples (from ''H'' different strata) then each of them will have a sample size ''n<sub>h</sub>'', ''h'' = 1, 2, ..., ''H''. These ''n<sub>h</sub>'' must conform to the rule that ''n''<sub>1</sub> + ''n''<sub>2</sub> + ... + ''n''<sub>''H''</sub> = ''n'' (i.e., that the total sample size is given by the sum of the sub-sample sizes). Selecting these ''n<sub>h</sub>'' optimally can be done in various ways, using (for example) Neyman's optimal allocation.

There are many reasons to use stratified sampling:<ref>Kish (1965, Section 3.1)</ref> to decrease variances of sample estimates, to use partly non-random methods, or to study strata individually. A useful, partly non-random method would be to sample individuals where easily accessible, but, where not, sample clusters to save travel costs.<ref>Kish (1965), p. 148.</ref>

In general, for ''H'' strata, a weighted sample mean is
: <math> \bar x_w  = \sum_{h=1}^H W_h \bar x_h, </math>
with

: <math> \operatorname{Var}(\bar x_w) = \sum_{h=1}^H W_h^2 \operatorname{Var}(\bar x_h). </math><ref>Kish (1965), p. 78.</ref>

The weights, <math>W_h</math>, frequently, but not always, represent the proportions of the population elements in the strata, and <math>W_h=N_h/N</math>. For a fixed sample size, that is <math> n = \sum n_h </math>,

: <math>  \operatorname{Var}(\bar x_w) = \sum_{h=1}^H W_h^2 \operatorname{Var}(\bar x_h) \left(\frac{1}{n_h} - \frac{1}{N_h}\right), </math><ref>Kish (1965), p. 81.</ref>

which can be made a minimum if the [[Sampling rate|sampling rate]] within each stratum is made
proportional to the standard deviation within each stratum: <math> n_h/N_h=k S_h </math>, where <math> S_h = \sqrt{\operatorname{Var} (\bar x_h)} </math> and <math>k</math> is a constant such that <math> \sum{n_h} = n </math>.

An "optimum allocation" is reached when the sampling rates within the strata
are made directly proportional to the standard deviations within the strata
and inversely proportional to the square root of the sampling cost per element
within the strata, <math>C_h</math>:
: <math> \frac{n_h}{N_h} = \frac{K S_h}{\sqrt{C_h}}, </math><ref>Kish (1965), p. 93.</ref>

where <math>K</math> is a constant such that <math> \sum{n_h} = n </math>, or, more generally, when

: <math> n_h = \frac{K' W_h S_h}{\sqrt{C_h}}. </math><ref>Kish (1965), p. 94.</ref>

==Qualitative research==
Qualitative research approaches sample size determination with a distinctive methodology that diverges from quantitative methods. Rather than relying on predetermined formulas or statistical calculations, it involves a subjective and iterative judgment throughout the research process In qualitative studies, researchers often adopt a subjective stance, making determinations as the study unfolds. 
Sample size determination in qualitative studies takes a different approach. It is generally a subjective judgment, taken as the research proceeds.<ref>Sandelowski, M. (1995). 
Sample size in qualitative research. ''Research in Nursing & Health'', 18, 179–183</ref> One common approach is to continually include additional participants or materials until a point of "saturation" is reached. Saturation occurs when new participants or data cease to provide fresh insights, indicating that the study has adequately captured the diversity of perspectives or experiences within the chosen sample [[Social:Theoretical sampling#Theoretical saturation|saturation]] is reached.<ref>Glaser, B. (1965). The constant comparative method of qualitative analysis. ''Social Problems'', 12, 436–445</ref> The number needed to reach saturation has been investigated empirically.<ref>{{Cite journal|doi=10.1080/08870440903194015|title=What is an adequate sample size? Operationalising data saturation for theory-based interview studies|year=2010|last1=Francis|first1=Jill J.|last2=Johnston|first2=Marie|last3=Robertson|first3=Clare|last4=Glidewell|first4=Liz|last5=Entwistle|first5=Vikki|last6=Eccles|first6=Martin P.|last7=Grimshaw|first7=Jeremy M.|journal=Psychology & Health|volume=25|issue=10|pages=1229–1245|pmid=20204937|s2cid=28152749|url=https://openaccess.city.ac.uk/id/eprint/1732/1/What%20is%20an%20adequate%20sample%20size.pdf}}</ref><ref name="Guest2006" /><ref>{{Cite journal|doi = 10.1186/1472-6947-11-36|title = Clinician attitudes toward and use of electronic problem lists: A thematic analysis|year = 2011|last1 = Wright|first1 = Adam|last2 = Maloney|first2 = Francine L.|last3 = Feblowitz|first3 = Joshua C.|journal = BMC Medical Informatics and Decision Making|volume = 11|page = 36|pmid = 21612639|pmc = 3120635 | doi-access=free }}</ref><ref>{{cite journal|first=Mark |last=Mason|year=2010|url=http://www.qualitative-research.net/index.php/fqs/article/view/1428/3027|title=Sample Size and Saturation in PhD Studies Using Qualitative Interviews|volume=11|issue=3|journal=Forum Qualitative Sozialforschung |page=8}}</ref>

Unlike quantitative research, qualitative studies face a scarcity of reliable guidance regarding sample size estimation prior to beginning the research.
Imagine conducting in-depth interviews with cancer survivors, qualitative researchers may use data saturation to determine the appropriate sample size. If, over a number of interviews, no fresh themes or insights show up, saturation has been reached and more interviews might not add much to our knowledge of the survivor's experience. Thus, rather than following a preset statistical formula, the concept of attaining saturation serves as a dynamic guide for determining sample size in qualitative research. There is a paucity of reliable guidance on estimating sample sizes before starting the research, with a range of suggestions given.<ref name="Guest2006">{{Cite journal|doi = 10.1177/1525822X05279903|title = How Many Interviews Are Enough?|year = 2006|last1 = Guest|first1 = Greg|last2 = Bunce|first2 = Arwen|last3 = Johnson|first3 = Laura|journal = Field Methods|volume = 18|pages = 59–82|s2cid = 62237589}}</ref><ref>Emmel, N. (2013). ''Sampling and choosing cases in qualitative research: A realist approach.'' London: Sage.</ref><ref>{{Cite journal|doi=10.1007/s11135-005-1098-1|title=A Call for Qualitative Power Analyses|year=2007|last1=Onwuegbuzie|first1=Anthony J.|last2=Leech|first2=Nancy L.|journal=Quality & Quantity|volume=41|pages=105–121|s2cid=62179911}}</ref><ref name="Fugard2015">{{cite journal |author1=Fugard AJB |author2=Potts HWW | title = Supporting thinking on sample sizes for thematic analyses: A quantitative tool | journal = International Journal of Social Research Methodology | volume =  18| issue =  6| pages =  669–684| date = 10 February 2015 | doi = 10.1080/13645579.2015.1005453 |s2cid=59047474 | url =http://discovery.ucl.ac.uk/1498831/3/Potts_10-7-2015_Supporting.pdf | doi-access =free }}</ref> In an effort to introduce some structure to the sample size determination process in qualitative research, a tool analogous to quantitative power calculations has been proposed. This tool, based on the [[Negative binomial distribution|negative binomial distribution]], is particularly tailored for[[Thematic analysis|thematic analysis]].<ref>Galvin R (2015). How many interviews are enough? Do qualitative interviews in building energy consumption research produce reliable knowledge? Journal of Building Engineering, 1:2–12.</ref><ref name="Fugard2015" />

==See also==
*[[Design of experiments]]
*Engineering response surface example under [[Stepwise regression]]
*[[Cohen's h]]

==References==
{{Reflist|2}}

==General references==
*{{cite journal |last1=Bartlett |first1=J. E. II |last2=Kotrlik |first2=J. W. |last3=Higgins |first3=C. |year=2001 |url=http://www.osra.org/itlpj/bartlettkotrlikhiggins.pdf |title=Organizational research: Determining appropriate sample size for survey research |journal=Information Technology, Learning, and Performance Journal |volume=19 |issue=1 |pages=43–50 }}
*{{cite book |last=Kish |first=L. |year=1965 |title=Survey Sampling |publisher=Wiley |isbn=978-0-471-48900-9 |url-access=registration |url=https://archive.org/details/surveysampling00lesl }}
*{{cite web|last1=Smith|first1=Scott|title=Determining Sample Size: How to Ensure You Get the Correct Sample Size|url=https://www.qualtrics.com/experience-management/research/determine-sample-size/|website=Qualtrics|access-date=19 September 2018|date=8 April 2013}}
*{{cite journal|last1=Israel|first1=Glenn D.|title=Determining Sample Size|url=https://www.academia.edu/21353552|journal=University of Florida, PEOD-6|year=1992|access-date=29 June 2019}}
*Rens van de Schoot, Milica Miočević (eds.). 2020. Small Sample Size Solutions (Open Access): A Guide for Applied Researchers and Practitioners. Routledge.

==Further reading==
* [http://www.itl.nist.gov/div898/handbook/ppc/section3/ppc333.htm NIST: Selecting Sample Sizes]
* ASTM E122-07: Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

==External links==
* [https://www.mathworks.com/matlabcentral/fileexchange/71985-cochran A MATLAB script implementing Cochran's sample size formula]

{{Statistics|collection|state=expanded}}

{{DEFAULTSORT:Sample Size}}
[[Category:Sampling (statistics)]]

de:Zufallsstichprobe#Stichprobenumfang

{{Sourceattribution|Sample size determination}}