Module:Location map/data/USA Texas

Location map of Texas

name	Texas
border coordinates
	36.8
	-106.9	←↕→	-93.2
	25.5
map center	[ ⚑ ] 31.15°N 100.05°W / 31.15; -100.05
image	USA Texas location map.svg
image1	Relief map of Texas.png

Module:Location map/data/USA Texas is a location map definition used to overlay markers and labels on an equirectangular projection map of Texas. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "USA Texas":

• {{Location map|USA Texas |...}}
• {{Location map many|USA Texas |...}}
• {{Location map+|USA Texas |...}}
• {{Location map~|USA Texas |...}}

Map definition

• name = Texas

  Name used in the default map caption

• image = USA Texas location map.svg

  The default map image, without "Image:" or "File:"

• image1 = Relief map of Texas.png

  An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters

• top = 36.8

  Latitude at top edge of map, in decimal degrees

• bottom = 25.5

  Latitude at bottom edge of map, in decimal degrees

• left = -106.9

  Longitude at left edge of map, in decimal degrees

• right = -93.2

  Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:

• Template:Location map#Relief parameter
• Template:Location map+/relief
• Template:Location map#AlternativeMap parameter
• Template:Location map+/AlternativeMap

Precision

Longitude: from West to East this map definition covers 13.7 degrees.

• At an image width of 200 pixels, that is 0.0685 degrees per pixel.
• At an image width of 1000 pixels, that is 0.0137 degrees per pixel.

Latitude: from North to South this map definition covers 11.3 degrees.

• At an image height of 200 pixels, that is 0.0565 degrees per pixel.
• At an image height of 1000 pixels, that is 0.0113 degrees per pixel.

See also

• Module:Location map/data/USA

Location map templates

• Template:Location map, to display one mark and label using latitude and longitude
• Template:Location map many, to display up to nine marks and labels
• Template:Location map+, to display an unlimited number of marks and labels

Creating new map definitions

• Template:Location map/Creating a new map definition

---

return {
	name = 'Texas',
	top = 36.8,
	bottom = 25.5,
	left = -106.9,
	right = -93.2,
	image = 'USA Texas location map.svg',
	image1 = 'Relief map of Texas.png'
}