Module:Location map/data/USA Washington/doc

From HandWiki
< Module:Location map‎ | data/USA Washington
Revision as of 16:10, 27 March 2020 by imported>Lam-ang (recat)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This is the documentation page for Module:Location map/data/USA Washington


Location map of Washington (state)
name Washington (state)
border
coordinates
49.2
-125 ←↕→ -116.7
45.3
map center [ ⚑ ] 47°15′N 120°51′W / 47.25°N 120.85°W / 47.25; -120.85
image USA Washington location map.svg
USA Washington location map.svg
image1 USA Washington relief location map.jpg
USA Washington relief location map.jpg
Map of Washington (click on map to see larger image)

Module:Location map/data/USA Washington is a location map definition used to overlay markers and labels on an equirectangular projection map of Washington (state). The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "USA Washington":

Map definition

  • name = Washington (state)
    Name used in the default map caption
  • bottom = 45.3
    Latitude at bottom edge of map, in decimal degrees
  • left = -125
    Longitude at left edge of map, in decimal degrees
  • right = -116.7
    Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:

Precision

Longitude: from West to East this map definition covers 8.3 degrees.

  • At an image width of 200 pixels, that is 0.0415 degrees per pixel.
  • At an image width of 1000 pixels, that is 0.0083 degrees per pixel.

Latitude: from North to South this map definition covers 3.9 degrees.

  • At an image height of 200 pixels, that is 0.0195 degrees per pixel.
  • At an image height of 1000 pixels, that is 0.0039 degrees per pixel.

Examples using location map templates

Location map

Olympia is located in Washington (state)
Olympia
Olympia
Olympia (Washington (state))
{{Location map | USA Washington
| width   = 250
| lat_deg =  47 | lat_min = 02 | lat_sec = 33 | lat_dir = N
| lon_deg = 122 | lon_min = 53 | lon_sec = 35 | lon_dir = W
| label   = Olympia
}}

Location map many

Location map/data/USA Washington/doc is located in Washington (state)
Blaine
Blaine
Camas
Camas
Ilwaco
Ilwaco
Newport
Newport
Locations in Washington
{{Location map many | USA Washington
| width    = 250
| caption  = Locations in Washington
| lat1 = 48.988 | long1 = -122.744 | label1 = Blaine
| lat2 = 45.591 | long2 = -122.412 | label2 = Camas
| lat3 = 46.313 | long3 = -124.030 | label3 = Ilwaco
| lat4 = 48.181 | long4 = -117.048 | label4 = Newport
}}

Location map+

Location map/data/USA Washington/doc is located in Washington (state)
Blaine
Blaine
Camas
Camas
Ilwaco
Ilwaco
Newport
Newport
Locations in Washington
{{Location map+ | USA Washington
| width   = 250
| caption = Locations in Washington
| places  =
  {{Location map~ | USA Washington
  | lat = 48.988 | long = -122.744 | label = Blaine
  }}
  {{Location map~ | USA Washington
  | lat = 45.591 | long = -122.412 | label = Camas
  }}
  {{Location map~ | USA Washington
  | lat = 46.313 | long = -124.030 | label = Ilwaco
  }}
  {{Location map~ | USA Washington
  | lat = 48.181 | long = -117.048 | label = Newport
  }}
}}

See also

Location map templates

Creating new map definitions