Engineering:Multifunction tester
From HandWiki
Revision as of 10:04, 5 August 2021 by imported>PolicyEnforcerIA (attribution)
This article does not cite any external source. HandWiki requires at least one external source. See citing external sources. (April 2012) (Learn how and when to remove this template message) |
A multifunction tester or MFT is an electronic device used by electricians to test electrical circuits that use the "low" and "extra-low voltages" typically used by consumers in domestic, commercial and agricultural settings.
Multifunction testers are able to perform continuity tests (or low ohms resistance tests) and insulation resistance tests (or high ohms resistance tests) and they may also be able to perform earth fault loop impedance tests, prospective short-circuit current tests, earth electrode tests and RCD tests.
This article does not cite any external source. HandWiki requires at least one external source. See citing external sources. (2021) (Learn how and when to remove this template message) |
![]() | Original source: https://en.wikipedia.org/wiki/Multifunction tester.
Read more |