PhoneNet

From HandWiki
Revision as of 22:01, 6 March 2023 by Steve Marsio (talk | contribs) (url)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Implementation of AppleTalk's physical layer
Farallon PhoneNET adapter

PhoneNet was an implementation of the AppleTalk networking physical layer created by Farallon Computing (now Netopia).

Instead of using expensive shielded twisted pair wiring as in Apple's LocalTalk implementation, PhoneNet uses standard four-conductor telephone (Category 1) patch cords and modular connectors.

Like LocalTalk, the theoretical maximum speed for data transfer was 230 kbit/s, and it is generally used in a daisy chain topology.

Functionality

Unlike LocalTalk's balanced and grounded implementation, PhoneNet used only two wires of the four in a typical cable.

As normal telephone equipment also normally used only two wires, PhoneNet could be plugged into existing phone lines in some instances, allowing both phone calls and networking over a single cable.

Generally this requires some hand-crimping of a cable using three RJ11 jacks, connecting a single jack to two, one with two wires for the phone and the other with the other two for networking.

Superseded by

Though PhoneNet transceivers are still available from third parties for use on legacy Macintosh networks, no current Apple computer or device model comes with the RS-422 serial ports that are required for PhoneNet transceivers. All modern Apple devices network use Ethernet or Wi-Fi or Bluetooth.

External links