Block availability map
In computer file systems, a block availability map (BAM)[1][2][3][4][5] is a data structure used to track disk blocks that are considered free (available for new data). It is used along with a directory to manage files on a disk (originally only a floppy disk, and later also a hard disk). In terms of Commodore DOS (CBM DOS) compatible disk drives, the BAM was a data structure stored in a reserved area of the disk (its size and location varied based on the physical characteristics of the disk). For each track, the BAM consisted of a bitmap of available blocks and (usually) a count of the available blocks. The count was held in a single byte, as all formats had 256 or fewer blocks per track. The count byte was simply the sum of all 1-bits in the bitmap of bytes for the current track.
The following table illustrates the layout of Commodore 1541 BAM. The table would be larger for higher-capacity disks (described below).
Total byte | Bitmap byte 1 | Bitmap byte 2 | Bitmap byte 3 | |
---|---|---|---|---|
Track 1 | blocks available | Blocks 0-7 | Blocks 8-15 | Blocks 16-23 |
Track 2 | blocks available | Blocks 0-7 | Blocks 8-15 | Blocks 16-23 |
... | ... | ... | ... | ... |
Track 35 | blocks available | Blocks 0-7 | Blocks 8-15 | Blocks 16-23 |
The bitmap was contained in 3 bytes for Commodore 1541 format (single-sided) disks because it had 17 to 20 sectors per track (note 3 bytes can hold at least 20 bits).[6] Similarly, the Commodore 1571 used 3 bytes for the bitmap of each track, but the BAM was twice the size because there were twice as many tracks when formatted as double-sided.[7] In contrast, the Commodore 1581 disk drive used 5 bytes for the bitmap because the disk format had 40 blocks per track (note 5 bytes can hold 40 bits).[8]
In the bitmap of any format, a 1 bit indicated the block was available (free), while a 0 bit indicated the block was not available (used), and the bitmap data was stored low-byte first. So the first byte held a map for blocks 0 to 7, the second byte held a map for blocks 8 to 15, and so on. Within a byte, the bitmap was ordered low-bit first. For example, the first byte would represent block 0 with the least significant bit and block 7 with the most significant bit.
Storage devices by Creative Micro Designs, intended for use with CBM computers, also used a Block Availability Map which served the same purpose. However, these devices (FD-2000, FD-4000, and CMD-HD) did not include a count byte, and the bits in each byte were reversed (high-bit first). Although the bits were reversed (compared to CBM formats), the bytes were still stored in the same order (low-byte first).[9]
Bitmap byte 1 | Bitmap byte 2 | ... | Bitmap byte 32 | |
---|---|---|---|---|
Track 1 | Blocks 0-7 | Blocks 8-15 | ... | Blocks 248-255 |
Track 2 | Blocks 0-7 | Blocks 8-15 | ... | Blocks 248-255 |
... | ... | ... | ... | ... |
See also
References
- ↑ Englisch, Lothar (1984). The Anatomy of the 1541 Disk Drive. Grand Rapids, MI: Abacus Software. p. 89. ISBN 0-916439-01-1. https://archive.org/details/The_Anatomy_of_the_1541_Disk_Drive.
- ↑ 1541 User's Guide. Commodore Business Machines. 1982. p. 9.
- ↑ 1571 User's Guide. Commodore Business Machines. 1985. p. 23.
- ↑ 1581 User's Guide. Commodore Business Machines. 1987. p. 34.
- ↑ FD Series User's Manual. Creative Micro Designs. 1992. p. 108.
- ↑ 1541 User's Guide. Commodore Business Machines. 1982. p. 65.
- ↑ 1571 User's Guide. Commodore Business Machines. 1985. pp. 108–109.
- ↑ 1581 User's Guide. Commodore Business Machines. 1987. pp. 119–120.
- ↑ FD Series User's Manual. Creative Micro Designs. 1992. pp. 112–114.
![]() | Original source: https://en.wikipedia.org/wiki/Block availability map.
Read more |