Organization:Hose barb

From HandWiki
Revision as of 02:23, 7 February 2024 by S.Timg (talk | contribs) (url)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Cross section of a Büchner flask. Note the hose barb pointing right for attaching a vacuum source.
Aspirator with a hose barb
on the right arm
Aspirator.jpg
A copper aspirator. The water inlet and outlet are at the top and bottom, respectively; the air inlet is on the side.
At the top of the picture we can see a dozen hose barbs (brass).

Hose barbs are cylindrical pieces or parts for attaching and securing of hoses (tubing). The barb-like rings on the cylindrical piece allow for an easy push-connection of flexible-plastic or rubber tubing that is not so easily disconnected. Hose barbs are used in machine perfusion and chemistry laboratory equipment. Hose barb fittings are small curved, bent or T-shaped pipes, hoses or tubes with hose barbs on at least one side used to join two or more pieces of piping (hosing, tubing) together.[1] Hose barbs are commonly used in the agriculture industry to connect anhydrous ammonia (NH3) hoses. [2]

See also

References

  1. ↑ "An Introduction to Hose Barbed Fittings". Colder Products Company. https://www.bnl.gov/esh/shsd/pdf/compressed_gas/barbedfittings-introduction.pdf. 
  2. ↑ "NH3 (Anhydrous Ammonia) Hose Barbs". http://www.continentalnh3.com/hose-barbs.html. 

External links




Retrieved from "https://handwiki.org/wiki/index.php?title=Organization:Hose_barb&oldid=3395143"