Chemistry:Silicone resin

From HandWiki
Revision as of 07:59, 8 February 2024 by AstroAI (talk | contribs) (url)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Type of silicone material
Silicone resin with R = CH3, H or OH

Silicone resins are a type of silicone material which is formed by branched, cage-like oligosiloxanes with the general formula of R
n
SiX
m
O
y
,
where R is a non-reactive substituent, usually methyl (Me = –CH
3
) or phenyl (Ph = –C
6
H
5
), and X is a functional group: hydrogen (–H), hydroxyl (–OH), chlorine (–Cl) or alkoxy (–O
). These groups are further condensed in many applications, to give highly crosslinked, insoluble polysiloxane networks.[1]

When R is methyl, the four possible functional siloxane monomeric units are described as follows:[2]

  • "M" stands for trimethylsilanol, Me
    3
    SiO
    ;
  • "D" for Me
    2
    SiO
    2
    ;
  • "T" for MeSiO
    3
    ;
  • "Q" for SiO
    4
    .

Note that a network of only Q groups becomes fused quartz.

The most abundant silicone resins are built of D and T units (DT resins) or from M and Q units (MQ resins), however many other combinations (MDT, MTQ, QDT) are also used in industry.

Silicone resins represent a broad range of products. Materials of molecular weight in the range of 1000–10,000 are very useful in pressure-sensitive adhesives, silicone rubbers, coatings and additives.[3][4] Polysiloxane polymers with reactive side group functionality such as vinyl, acrylate, epoxy, mercaptan or amine, are used to create thermoset polymer matrix composites, coatings and adhesives.[5]

Silicone resins are prepared by hydrolytic condensation of various silicone precursors. In early processes of preparation of silicone resins sodium silicate and various chlorosilanes were used as starting materials. Although the starting materials were the least expensive ones (something typical for industry), structural control of the product was very difficult. More recently, a less reactive tetraethoxysilane - (TEOS) or ethyl polysilicate and various disiloxanes are used as starting materials.[1]

Microbial deterioration

The algae Stichococcus bacillaris, and certain fungal species have been seen to colonize silicone resins used at archaeological sites.[6]

See also

  • Water glass (Sodium silicate, .e.g Na2SiO3 etc.)
  • Silicon rubber

References

  1. 1.0 1.1 S.J. Clarson, J.A. Semlyen, Siloxane Polymers, Prentice Hall, New Jersey (1993).
  2. Dow Corning nomenclature of silicon resins
  3. List of silicone resins produced by Dow Corning
  4. Database of silicon resins produced by Momentive Performance Materials (formerly GE Silicones)
  5. B. Boutevin et al., in Silicon-Containing Polymers, ed. RG Jones et al., Springer, Netherlands, 2000, pp 79-112, ISBN:978-1-4020-0348-6
  6. Francesca Cappitelli; Claudia Sorlini (2008). "Microorganisms Attack Synthetic Polymers in Items Representing Our Cultural Heritage". Applied and Environmental Microbiology 74 (3): 564–9. doi:10.1128/AEM.01768-07. PMID 18065627. Bibcode2008ApEnM..74..564C. 


de:Silikonharz