Advanced Data Communication Control Procedures

From HandWiki
Revision as of 20:45, 8 February 2024 by CodeMe (talk | contribs) (linkage)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Computer networking protocol

In telecommunication, Advanced Data Communication Control Procedures (or Protocol) (ADCCP) is a bit-oriented data link layer protocol developed by the American National Standards Institute. It is functionally equivalent to the ISO High-Level Data Link Control (HDLC) protocol.[1]

Although the ISO and ANSI standards writers coordinated their work, so the differences between the standards are mainly editorial, there is one meaningful difference: ADCCP's definition of the basic subset required to implement balanced asynchronous mode includes the RSET frame, while HDLC makes it optional.[2]

One major difference between the two is the unnumbered (U) format. When extended (7-bit) sequence numbers are used, I and S frames have two-byte control fields. Like early versions of HDLC,[3] ADCCP specifies a 2-byte control field format with the P/F flag duplicated.[4] Later HDLC specifications, in particular ISO/IEC 13239, changed that to specify that U frames have 1-byte control fields in all cases.

ADCCP control fields
First byte Second byte Description
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
0 N(S) P/F N(R) I frame, N(S) is a 3-bit send sequence number
1 0 type P/F N(R) S frame, N(R) is a 3-bit receive sequence number
1 1 type P/F type U frame
0 N(S) P/F N(R) Extended I frame, N(S) is a 7-bit sequence number
1 0 type —0— P/F N(R) Extended S frame, N(R) is a 7-bit sequence number
1 1 type P/F type P/F —0— Extended U frame (ADCCP only)

See also

References

  1. Friend et al. 1988, p. 191
  2. NBS 1980, p. 6, §3.0 ADCCP classes of procedures
  3. ISO 1984, p. 18, §7.4 Extended control field formats
  4. ANSI 1979, p. 28, §5.2.2 Extended control field