Company:Volvo Car Manufacturing Malaysia

From HandWiki
Revision as of 20:31, 9 February 2024 by AnLinks (talk | contribs) (add)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Volvo Car Manufacturing Malaysia Sdn. Bhd.
(VCMM)
IndustryAutomotive industry
FoundedSeptember 1966
Headquarters
Shah Alam
,
Malaysia
Area served
Southeast Asia and Taiwan
ProductsVolvo Cars
Number of employees
500
ParentVolvo Car Corporation (100%)[1]

Volvo Car Manufacturing Malaysia Sdn. Bhd. (VCMM) is a wholly owned subsidiary of Sweden-based Volvo Car Corporation. The company was established in September 1966 through a joint venture between AB Volvo and the Federal Auto Company Sdn. Bhd..

Volvo Car Manufacturing Malaysia operates a vehicle assembly plant in Shah Alam which produces Volvo passenger cars for domestic and export markets. The 50-year-old(as of 2016) VCMM plant is the oldest automobile assembly plant in Malaysia, and is widely credited as one of the pioneers of the Malaysian automotive industry.

Volvo Car Manufacturing Malaysia was previously known as Swedish Motor Assemblies Sdn. Bhd. (SMA) between 1966 and 2012. From 2013 onwards, the company changed its name to Volvo Car Manufacturing Malaysia.[2][3]

History

Volvo's history in Malaysia dates back to the early 1960s. Four businessmen from Penang had travelled to Volvo's establishment in Sweden to propose plans to market Volvo cars in Malaysia.[4][5] Volvo granted the group the distributorship rights, and the Federal Auto Company Sdn. Bhd. was founded in March 1960.[6] The first Volvo cars were imported into Malaysia in that same month.[6] Initially, sales were slow-paced, but by 1966, Volvo cars had gained a good reputation in Malaysia, while Federal Auto had expanded their network throughout West Malaysia and Singapore.[7]

The Volvo 144 became the debut model for the Swedish Motor Assemblies plant.[7]

In September 1966, Swedish Motor Assemblies Sdn. Bhd. (SMA) was established as a joint venture on a 50/50 basis between Volvo and Federal Auto.[6][7] SMA was established in response to a government-proposed initiative to set up an automotive industry in Malaysia.[4] Foreign and local companies were granted licences and incentives to facilitate local assembly of vehicles and manufacturing of vehicle components. Volvo was one of nineteen firms which expressed interest in the project.

Construction of the Swedish Motor Assemblies plant commenced in March 1967 in an industrial estate in Batu Tiga, near Shah Alam.[7] Construction was hampered by the 1967 Suez crisis and other issues, but was completed on schedule in October 1967.[7] The Volvo 144 became the first model to roll-off the SMA assembly line in November 1967.[7] The Minister of Transport, Sardon Jubir, test drove the first Malaysian-assembled Volvo the following month.[8] The Minister of Commerce and Industry, Lim Swee Aun, officially opened the Swedish Motor Assemblies plant on 17 February 1968.[7]

The Swedish Motor Assemblies plant is widely credited as the 'first automobile assembly plant in Malaysia'.[7] However, SMA was preceded by Singapore-based Ford Motor Company of Malaya (Ford Malaya), which began local assembly operations in November 1926.[9] In April 1941, Ford Malaya built Southeast Asia's first fully-fledged automobile assembly plant in Bukit Timah, Singapore.[9] The plant was later renamed the Ford Motor Company of Malaysia (Ford Malaysia), and briefly became Malaysia's oldest automobile assembly plant when Singapore was part of Malaysia (September 1963 – August 1965).[10] Additionally, Kelang Pembena Kereta-Kereta (KPKK) had commenced Fiat car assembly in August 1967 at their all-new assembly plant in Tampoi, Johor, three months ahead of Swedish Motor Assemblies.[11] However, the official opening of the KPKK plant took place on 26 February 1968, nine days after SMA's official opening.[11] Nonetheless, both Ford and Fiat assembly plants have since shut down, while the Volvo plant has survived and remains active today.

As a better-equipped model from 1984, there were also the Volvo 240. In the mid-nineties, the Volvo S40 and its wagon version Volvo V40 were introduced. With the takeover by Ford, SMA also began manufacturing Land Rover Defenders. From 1999 until the spring of 2010 the plant was part of Ford Motor Company.

The first model of the new millennium in 2001 came the luxurious Volvo S60 added. This Volvo ran into the Malaysian market for the first time in the upper middle class. Two years later, it was followed by the Volvo S80 and SUV Volvo XC90. In 2004, after all, the S40 was replaced by its second generation. The combined Volvo V50 was only added in the following year. In July 2006, the coupe-convertible Volvo C70 debuted. In 2008 it was followed by the Volvo C30. The old S80, which still was manufactured here in the first generation. With the new joint venture Indobuana Autoraya, this model was exported to Jakarta, Indonesia. The replacement came in April 2010 as the second generation of the Volvo S80.

Up to 6000 units per year are manufactured in the Malaysian plant, with approximately 500 employees working in two shifts. The site comprises a total area of 25,000 square metres (270,000 sq ft). Distribution of vehicles is handled by the in-house sales organisation, Volvo Car Malaysia Sdn. Bhd.. The vehicles assembled here have vehicle identification number (VIN), with the eleventh position of the assembly plant, a "5". SMA also built parts for Volvo AB and Renault Trucks SAS Truck Commercial.

As of Q1 2016, only the V40, V60, S60 and XC60 remain in production.[12] Production of the first generation XC90 ceased in September 2014, while the last S80 unit rolled off the line in August 2015.

Volvo Car Manufacturing Malaysia commenced local assembly of the second generation XC90 in May 2016, making it the first plug-in hybrid electric vehicle (PHEV) to be assembled in Malaysia.[13] The locally assembled (CKD) XC90 T8 Twin Engine was formally launched on 1 June 2016, approximately six months after the debut of the fully imported (CBU) XC90.[14][15] VCMM's 50-year-old Shah Alam plant is the first and currently only plant to assemble the new XC90 outside Sweden.[15] Volvo had greatly invested in the plant's infrastructure to handle to the company's new Scalable Product Architecture (SPA) platform. The locally assembled XC90 was granted EEV status and significant tax exemptions, allowing it to be priced well under its fully imported, non-hybrid/EV competitors.[13] In terms of specifications, the CKD XC90 is almost identical to the CBU XC90, with differences being limited to paint options and other cosmetic changes.[15] VCM will export the new Malaysian-assembled XC90 to neighbouring Thailand, and the company has also announced plans to assemble the upcoming S90 in the near future.[13]

Local assembly of the new Volvo S90 commenced in June 2017. VCMM currently assembles two variants of the S90, namely the T8 Twin Engine plug-in hybrid and D4 Momentum diesel respectively.[16] In August 2017, VCMM began exporting both Malaysian-assembled S90 models to Thailand.[16]

Current models

Former models

Production figures

Swedish Motor Assemblies (SMA) production figures between 2009 and Q1 2016[12]
Model Total Q1 2016 2015 2014 2013 2012 2011 2010 2009
Volvo S80 928 88 124 226 198 148 120 24
Volvo XC90 696 149 156 144 96 91 60
Volvo S40 906 84 277 383 162
Volvo V50 792 1 144 309 302 36
Volvo XC60 3,194 48 740 391 531 803 563 118
Volvo S60 1,788 24 72 273 458 681 280
Volvo V60 1,212 0 168 111 407 459 67
Volvo V40 2,052 76 500 917 559
Total produced 11,568 148 1,568 1,965 2,338 2,513 1,740 1,014 282
Notes: Q1 2016 applies for units sold in January, February & March 2016 only.
Total applies for model-specific units produced since beginning of production or January 2009 and cessation of production or March 2016 only (whichever applicable).
Total produced applies for all model units produced between January 2009 and March 2016 only.

References

  • German Wikipedia article
  1. ↑ "Volvo Car Group Annual Report 2016". assets.volvocars.com. 14 June 2017. http://assets.volvocars.com/intl/~/media/international/annualreports/2016/static/pdf/annualreport2016.pdf. 
  2. ↑ Daniel Khoo (20 October 2012). "Volvo chooses Malaysia as Asean manufacturing hub". The Star. http://biz.thestar.com.my/news/story.asp?file=/2012/10/20/business/12153889&sec=business. 
  3. ↑ "Volvo Malaysia appoints Mark Hallum as managing director". The Star. 17 July 2013. http://www.thestar.com.my/business/business-news/2013/07/17/volvo-malaysia-appoints-mark-hallum-as-managing-director/. 
  4. ↑ 4.0 4.1 Chris Ng (7 September 2016). "Take a look inside the oldest car factory in Malaysia Part 1". carmalaysia.my. http://carmalaysia.my/reviews/road-trip/volvo-shah-alam-factory-visit. 
  5. ↑ Chris Ng (7 September 2016). "Take a look inside the oldest car factory in Malaysia Part 2". carmalaysia.my. http://carmalaysia.my/reviews/road-trip/volvo-shah-alam-factory-visit-2. 
  6. ↑ 6.0 6.1 6.2 "Million $ expansion". The Straits Times. 26 February 1970. http://eresources.nlb.gov.sg/newspapers/Digitised/Article/straitstimes19700226-1.2.118.1.3. 
  7. ↑ 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 "Dr. Lim to open first motor assembly plant in Malaysia". The Straits Times. 17 February 1968. http://eresources.nlb.gov.sg/newspapers/Digitised/Article/straitstimes19680217-1.2.79. 
  8. ↑ "Malaysia's first Volvo rolls out". The Straits Times. 15 December 1967. http://eresources.nlb.gov.sg/newspapers/Digitised/Article/straitstimes19671215-1.2.85. 
  9. ↑ 9.0 9.1 Kartini Saparudin & Nor-Afidah Abd Rahman (5 November 2007). "Ford Motor Company of Malaya (Ford Malaya)". National Library Board Singapore. http://eresources.nlb.gov.sg/infopedia/articles/SIP_1260_2007-11-05.html. 
  10. ↑ "First motor assembly plant in Malaysia is 38 years old". The Straits Times. 9 February 1964. http://eresources.nlb.gov.sg/newspapers/Digitised/Article/straitstimes19640209-1.2.167. 
  11. ↑ 11.0 11.1 "Sultan opens Johore Fiat assembly plant". The Straits Times. 27 February 1968. http://eresources.nlb.gov.sg/newspapers/Digitised/Article/straitstimes19680227-1.2.77. 
  12. ↑ 12.0 12.1 "Monthly Production by Maker/Brand in Malaysia, 2009–2016". marklines.com. 11 June 2016. http://www.marklines.com/en/vehicle_production/month_malaysia. 
  13. ↑ 13.0 13.1 13.2 Zachary Ho (3 June 2016). "Locally Assembled Volvo XC90 T8 Introduced". autoworld.com.my. http://autoworld.com.my/news/2016/06/03/locally-assembled-volvo-xc90-t8-introduced/. 
  14. ↑ Chris Aaron (3 December 2015). "Volvo XC90 T8 Twin Engine launched in M'sia, RM454k". Driven Communications. http://paultan.org/2015/12/03/2016-volvo-xc90-launched-in-malaysia/. 
  15. ↑ 15.0 15.1 15.2 Gerard Lye (1 June 2016). "Volvo XC90 T8 Twin Engine CKD launched in Malaysia, RM403,888 for locally-assembled plug-in hybrid SUV". Driven Communications. http://paultan.org/2016/06/01/volvo-xc90-t8-twin-engine-ckd-launched-in-malaysia-rm403888/. 
  16. ↑ 16.0 16.1 Gerard Lye (9 August 2017). "Volvo S90 T8 Twin Engine launched in Thailand – two trims offered, priced from 3.39 million baht (RM437k)". https://paultan.org/2017/08/09/volvo-s90-t8-twin-engine-new-d4-variant-launched-in-thailand/. 

External links




Retrieved from "https://handwiki.org/wiki/index.php?title=Company:Volvo_Car_Manufacturing_Malaysia&oldid=3483743"