Liquid-impregnated surface
A slippery liquid-infused porous surface (SLIPS), liquid-impregnated surface (LIS), or multi-phase surface consists of two distinct layers. The first is a highly textured or porous substrate with features spaced sufficiently close to stably contain the second layer which is an impregnating liquid that fills in the spaces between the features.[1][2][3] The liquid must have a surface energy well-matched to the substrate in order to form a stable film.[4] Slippery surfaces are finding applications in commercial products, anti-fouling surfaces, anti-icing and biofilm-resistant medical devices. Adaptive Surface Technologies [5] and LiquiGlide are commercial examples of liquid-impregnated surfaces, invented at Harvard University[6][7] and the Massachusetts Institute of Technology.[8]
SLIPS type surfaces have a number of advantages over traditional lotus based superhydrophobic surfaces. The free flowing liquid allows for the creation of a smooth surface with the ability to self-repair. This smooth surface often results in a low sliding angle for both high and low surface tension liquids. Finally, SLIPS surfaces can be made optically transparent unlike many traditional superhydrophobic surfaces that scatter light due to having structure on the same order as visible light.
However, the longevity of SLIPS for prolonged anti-icing applications have been of concern.[9] In this regard, replacing the lubricant in SLIPS with a phase switching liquid (PSL) [10] can yield promising results. PSLs are a class of phase change materials, which are in liquid state under ambient conditions and have a melting point higher than the freezing point of water. Thus the PSL changes into solid phase in a cold environment before water freezing can happen. While PSL impregnated textured surface behave as a traditional SLIPS in ambient conditions, when operated below the melting point of PSL, they resist PSL displacement out of surface texture by water, engendering enhanced icephobicity even on hydrophilic substrates.
See also
- Adaptive fluid-infused porous film
References
- ↑ "Slippery surfaces with high pressure stability, optical transparency, and self-healing characteristics". https://patents.google.com/patent/US9121306B2/.
- ↑ "US Patent # US 20130032316 A1". US Patent. USPTO. http://www.google.com/patents/US20130032316.
- ↑ "US Patent # US 20090191374 A1". US Patent. USPTO. http://www.google.com/patents/US20090191374.
- ↑ Aizenberg, Joanna; Grinthal, Alison; Hatton, Benjamin D.; Smythe, Elizabeth J.; Tang, Sindy K. Y.; Kang, Sung Hoon; Wong, Tak-Sing (September 2011). "Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity". Nature 477 (7365): 443–447. doi:10.1038/nature10447. ISSN 1476-4687. PMID 21938066. Bibcode: 2011Natur.477..443W. http://nrs.harvard.edu/urn-3:HUL.InstRepos:27417441.
- ↑ "Adaptive Surface Technologies" (in en-US). https://www.adaptivesurface.tech/.
- ↑ "Slippery surfaces with high pressure stability, optical transparency, and self-healing characteristics". https://patents.google.com/patent/US9121306B2/.
- ↑ Aizenberg, Joanna; Grinthal, Alison; Hatton, Benjamin D.; Smythe, Elizabeth J.; Tang, Sindy K. Y.; Kang, Sung Hoon; Wong, Tak-Sing (September 2011). "Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity". Nature 477 (7365): 443–447. doi:10.1038/nature10447. ISSN 1476-4687. PMID 21938066. Bibcode: 2011Natur.477..443W. http://nrs.harvard.edu/urn-3:HUL.InstRepos:27417441.
- ↑ "LiquiGlide website". LiquiGlide Inc.. http://www.liquiglide.com.
- ↑ Rykaczewski, Konrad; Anand, Sushant; Subramanyam, Srinivas Bengaluru; Varanasi, Kripa K. (2013-04-30). "Mechanism of Frost Formation on Lubricant-Impregnated Surfaces". Langmuir 29 (17): 5230–5238. doi:10.1021/la400801s. ISSN 0743-7463. PMID 23565857.
- ↑ Chatterjee, Rukmava; Beysens, Daniel; Anand, Sushant (2019). "Delaying Ice and Frost Formation Using Phase-Switching Liquids" (in en). Advanced Materials 31 (17): 1807812. doi:10.1002/adma.201807812. ISSN 1521-4095. PMID 30873685. Bibcode: 2019AdM....3107812C.
 |  |
