Engineering:Mirror cut-off
Mirror cut-off is a term used in photography for a problem that can occur within a reflex camera. This occurs when the mirror in the camera is smaller than the focusing screen and using long (telephoto) lenses. When light exits a non-telephoto lens, the light beams diverge from the rear of the lens and for this reason the mirror can normally be a bit smaller (hence lighter & faster). However if the focal length of the lens is quite long what happens is that the light rays are near parallel and when they reflect off a smaller mirror, you see a cropped image in the viewfinder.
The aperture plays a part in the problem as well though when composing a shot the aperture is usually wide open and it is at the smaller apertures that mirror cut-off is most pronounced. When the actual picture is taken the sensor/film will see an uncropped image as the mirror is swung up out of the light path. This is a viewfinder problem but may affect composition.
This article does not cite any external source. HandWiki requires at least one external source. See citing external sources. (2021) (Learn how and when to remove this template message) |