Engineering:Snap table
From HandWiki
Revision as of 11:16, 5 August 2021 by imported>PolicyEnforcerIA (attribution)
A snap table is a device used to shear concealed-fastener metal roofing panels including snap-lock and mechanically-seamed profiles. It is a tool employed by metal roofing contractors in the field or by metal companies in a shop setting. It works by removing a notch of each rib, slitting the panel in half between the removed notches and rolling the pan over for an eave or valley hem.
 | This article does not cite any external source. HandWiki requires at least one external source. See citing external sources. (2021) (Learn how and when to remove this template message) |
 |  |
