Module:Location map/data/Belize

Location map of Belize

name	Belize
border coordinates
	18.9
	-89.7	←↕→	-87.2
	15.6
map center	[ ⚑ ] 17.25°N 88.45°W / 17.25; -88.45
image	Belize location map.svg
image1	Belize physical map.svg

Map of Belize

Module:Location map/data/Belize is a location map definition used to overlay markers and labels on an equirectangular projection map of Belize. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Belize":

• {{Location map|Belize |...}}
• {{Location map many|Belize |...}}
• {{Location map+|Belize |...}}
• {{Location map~|Belize |...}}

Map definition

• name = Belize

  Name used in the default map caption

• image = Belize location map.svg

  The default map image, without "Image:" or "File:"

• image1 = Belize physical map.svg

  An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters

• top = 18.9

  Latitude at top edge of map, in decimal degrees

• bottom = 15.6

  Latitude at bottom edge of map, in decimal degrees

• left = -89.7

  Longitude at left edge of map, in decimal degrees

• right = -87.2

  Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:

• Template:Location map#Relief parameter
• Template:Location map+/relief
• Template:Location map#AlternativeMap parameter
• Template:Location map+/AlternativeMap

Precision

Longitude: from West to East this map definition covers 2.5 degrees.

• At an image width of 200 pixels, that is 0.0125 degrees per pixel.
• At an image width of 1000 pixels, that is 0.0025 degrees per pixel.

Latitude: from North to South this map definition covers 3.3 degrees.

• At an image height of 200 pixels, that is 0.0165 degrees per pixel.
• At an image height of 1000 pixels, that is 0.0033 degrees per pixel.

Examples using location map templates

Location map, using default map (image)

Belmopan

Belmopan (Belize)

{{Location map | Belize
| width   = 150
| lat_deg = 17.25
| lon_deg = -88.77
| label   = Belmopan
}}

Location map many, using relief map (image1)

Belmopan

Belize City

class=notpageimage|

Two locations in Belize

{{Location map many | Belize
| relief   = yes
| width    = 150
| caption  = Two locations in Belize
| lat1_deg = 17.25
| lon1_deg = -88.77
| label1   = Belmopan
| pos1     = bottom
| lat2_deg = 17.505
| lon2_deg = -88.187
| label2   = Belize City
| pos2     = top
}}

Location map+, using AlternativeMap

Belmopan

Belize City

class=notpageimage|

Two locations in Belize

{{Location map+ | Belize
| AlternativeMap = Belize physical map.svg
| width   = 150
| caption = Two locations in Belize
| places  =
  {{Location map~ | Belize
  | lat_deg  = 17.25
  | lon_deg  = -88.77
  | label    = Belmopan
  | position = bottom
  }}
  {{Location map~ | Belize
  | lat_deg  = 17.505
  | lon_deg  = -88.187
  | label    = Belize City
  | position = top
  }}
}}

See also

Location map templates

• Template:Location map, to display one mark and label using latitude and longitude
• Template:Location map many, to display up to nine marks and labels
• Template:Location map+, to display an unlimited number of marks and labels

Creating new map definitions

• Template:Location map/Creating a new map definition

---

return {
	name = 'Belize',
	top = 18.9,
	bottom = 15.6,
	left = -89.7,
	right = -87.2,
	image = 'Belize location map.svg',
	image1 = 'Belize physical map.svg'
}