Module:Location map/data/Canada British Columbia/doc
This is the documentation page for Module:Location map/data/Canada British Columbia
name | British Columbia | |||
---|---|---|---|---|
border coordinates | ||||
60.3 | ||||
-139.3 | ←↕→ | -113.7 | ||
48.1 | ||||
map center | [ ⚑ ] 54°12′N 126°30′W / 54.2°N 126.5°W | |||
image | Canada British Columbia location map 2.svg
| |||
image1 | Canada British Columbia relief location map.jpg
| |||
image2 | Canada British Columbia (no subdivisions) location map.svg
| |||
Module:Location map/data/Canada British Columbia is a location map definition used to overlay markers and labels on an equirectangular projection map of British Columbia. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.
Usage
These definitions are used by the following templates when invoked with parameter "Canada British Columbia":
{{Location map|Canada British Columbia |...}}
{{Location map many|Canada British Columbia |...}}
{{Location map+|Canada British Columbia |...}}
{{Location map~|Canada British Columbia |...}}
Map definition
name = British Columbia
- Name used in the default map caption
image = Canada British Columbia location map 2.svg
- The default map image, without "Image:" or "File:"
image1 = Canada British Columbia relief location map.jpg
- An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters
image2 = Canada British Columbia (no subdivisions) location map.svg
- Alternative map image which can be displayed via the AlternativeMap parameter
top = 60.3
- Latitude at top edge of map, in decimal degrees
bottom = 48.1
- Latitude at bottom edge of map, in decimal degrees
left = -139.3
- Longitude at left edge of map, in decimal degrees
right = -113.7
- Longitude at right edge of map, in decimal degrees
Alternative map
The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. The map displayed as image2 can be used with the AlternativeMap parameter. Examples may be found below or in the following:
- Template:Location map#Relief parameter
- Template:Location map+/relief
- Template:Location map#AlternativeMap parameter
- Template:Location map+/AlternativeMap
Precision
Longitude: from West to East this map definition covers 25.6 degrees.
- At an image width of 200 pixels, that is 0.128 degrees per pixel.
- At an image width of 1000 pixels, that is 0.0256 degrees per pixel.
Latitude: from North to South this map definition covers 12.2 degrees.
- At an image height of 200 pixels, that is 0.061 degrees per pixel.
- At an image height of 1000 pixels, that is 0.0122 degrees per pixel.
See also
Location map templates
- Template:Location map, to display one mark and label using latitude and longitude
- Template:Location map many, to display up to nine marks and labels
- Template:Location map+, to display an unlimited number of marks and labels