Module:Location map/data/Mexico Colima

From HandWiki
< Module:Location map
Revision as of 12:38, 23 October 2018 by imported>Frietjes (created from Template:Location map Mexico Colima, earlier edit history will be saved in Module:Location map/data/Mexico Colima/doc)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Location map of Colima
name Colima
border
coordinates
19.6
-104.8 ←↕→ -103.4
18.6
map center [ ⚑ ] 19°06′N 104°06′W / 19.1°N 104.1°W / 19.1; -104.1
image Mexico Colima location map.svg
Mexico Colima location map.svg
image2 Mexico Colima location map (urban areas).svg
Mexico Colima location map (urban areas).svg


Module:Location map/data/Mexico Colima is a location map definition used to overlay markers and labels on an equirectangular projection map of Colima. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Mexico Colima":

Map definition

  • name = Colima
    Name used in the default map caption
  • bottom = 18.6
    Latitude at bottom edge of map, in decimal degrees
  • left = -104.8
    Longitude at left edge of map, in decimal degrees
  • right = -103.4
    Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image2 can be used with the AlternativeMap parameter. Examples may be found below or in the following:

Precision

Longitude: from West to East this map definition covers 1.4 degrees.

  • At an image width of 200 pixels, that is 0.007 degrees per pixel.
  • At an image width of 1000 pixels, that is 0.0014 degrees per pixel.

Latitude: from North to South this map definition covers 1 degrees.

  • At an image height of 200 pixels, that is 0.005 degrees per pixel.
  • At an image height of 1000 pixels, that is 0.001 degrees per pixel.


See also

Location map templates

Creating new map definitions


return {
	name = 'Colima',
	top = 19.6,
	bottom = 18.6,
	left = -104.8,
	right = -103.4,
	image = 'Mexico Colima location map.svg',
--	image1 = Reserved for relief map,
	image2 = 'Mexico Colima location map (urban areas).svg'
}