Module:Location map/data/Mexico Tamaulipas
name | Tamaulipas | |||
---|---|---|---|---|
border coordinates | ||||
28 | ||||
-101 | ←↕→ | -96.5 | ||
22 | ||||
map center | [ ⚑ ] 25°00′N 98°45′W / 25°N 98.75°W | |||
image | Mexico Tamaulipas location map.svg
| |||
image2 | Mexico Tamaulipas location map (urban areas).svg
| |||
Module:Location map/data/Mexico Tamaulipas is a location map definition used to overlay markers and labels on an equirectangular projection map of Tamaulipas. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.
Usage
These definitions are used by the following templates when invoked with parameter "Mexico Tamaulipas":
{{Location map|Mexico Tamaulipas |...}}
{{Location map many|Mexico Tamaulipas |...}}
{{Location map+|Mexico Tamaulipas |...}}
{{Location map~|Mexico Tamaulipas |...}}
Map definition
name = Tamaulipas
- Name used in the default map caption
image = Mexico Tamaulipas location map.svg
- The default map image, without "Image:" or "File:"
image2 = Mexico Tamaulipas location map (urban areas).svg
- Alternative map image which can be displayed via the AlternativeMap parameter
top = 28
- Latitude at top edge of map, in decimal degrees
bottom = 22
- Latitude at bottom edge of map, in decimal degrees
left = -101
- Longitude at left edge of map, in decimal degrees
right = -96.5
- Longitude at right edge of map, in decimal degrees
Alternative map
The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image2 can be used with the AlternativeMap parameter. Examples may be found below or in the following:
Precision
Longitude: from West to East this map definition covers 4.5 degrees.
- At an image width of 200 pixels, that is 0.0225 degrees per pixel.
- At an image width of 1000 pixels, that is 0.0045 degrees per pixel.
Latitude: from North to South this map definition covers 6 degrees.
- At an image height of 200 pixels, that is 0.03 degrees per pixel.
- At an image height of 1000 pixels, that is 0.006 degrees per pixel.
Examples using location map templates
Location map, using default map
{{Location map | Mexico Tamaulipas | width = 250 | lat_deg = 23.733 | lon_deg = -99.133 | label = Ciudad Victoria }}
Location map many, using AlternativeMap
{{Location map many | Mexico Tamaulipas | AlternativeMap = Mexico Tamaulipas location map (urban areas).svg | width = 250 | caption = Locations in Tamaulipas | lat1_deg = 27.619 | lon1_deg = -99.624 | label1 = [[Miguel Alemán, Tamaulipas|Miguel Alemán]] | lat2_deg = 22.255 | lon2_deg = -97.869 | label2 = [[Tampico]] | lat3_deg = 23.567 | lon3_deg = -99.783 | label3 = [[Miquihuana, Tamaulipas|Miquihuana]] | lat4_deg = 25.95 | lon4_deg = -97.15 | label4 = [[Bagdad, Tamaulipas|Bagdad]] }}
See also
Location map templates
- Template:Location map, to display one mark and label using latitude and longitude
- Template:Location map many, to display up to nine marks and labels
- Template:Location map+, to display an unlimited number of marks and labels
Creating new map definitions
return { name = 'Tamaulipas', top = 28.00, bottom = 22.00, left = -101.00, right = -96.50, image = 'Mexico Tamaulipas location map.svg', -- image1 reserved for relief map image2 = 'Mexico Tamaulipas location map (urban areas).svg' }