Module:Location map/data/Mozambique

From HandWiki
< Module:Location map
Revision as of 18:32, 16 March 2018 by imported>Frietjes (created from Template:Location map Mozambique, edit history will be saved in Module:Location map/data/Mozambique/doc)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Location map of Mozambique
name Mozambique
border
coordinates
-10.2
29.8 ←↕→ 41.8
-27.4
map center [ ⚑ ] 18°48′S 35°48′E / 18.8°S 35.8°E / -18.8; 35.8
image Mozambique adm location map.svg
Mozambique adm location map.svg
image1 Mozambique relief location map.jpg
Mozambique relief location map.jpg


Module:Location map/data/Mozambique is a location map definition used to overlay markers and labels on an equirectangular projection map of Mozambique. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Mozambique":

Map definition

  • name = Mozambique
    Name used in the default map caption
  • bottom = -27.4
    Latitude at bottom edge of map, in decimal degrees
  • left = 29.8
    Longitude at left edge of map, in decimal degrees
  • right = 41.8
    Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:

Precision

Longitude: from West to East this map definition covers 12 degrees.

  • At an image width of 200 pixels, that is 0.06 degrees per pixel.
  • At an image width of 1000 pixels, that is 0.012 degrees per pixel.

Latitude: from North to South this map definition covers 17.2 degrees.

  • At an image height of 200 pixels, that is 0.086 degrees per pixel.
  • At an image height of 1000 pixels, that is 0.0172 degrees per pixel.


See also

Location map templates

Creating new map definitions


return {
	name = 'Mozambique',
	top = -10.2,
	bottom = -27.4,
	left = 29.8,
	right = 41.8,
	image = 'Mozambique adm location map.svg',
	image1 = 'Mozambique relief location map.jpg'
}