Bridge (graph theory)

From HandWiki
Short description: Edge in node-link graph whose removal would disconnect the graph
A graph with 16 vertices and six bridges (highlighted in red)
An undirected connected graph with no bridge edges

In graph theory, a bridge, isthmus, cut-edge, or cut arc is an edge of a graph whose deletion increases the graph's number of connected components.[1] Equivalently, an edge is a bridge if and only if it is not contained in any cycle. For a connected graph, a bridge can uniquely determine a cut. A graph is said to be bridgeless or isthmus-free if it contains no bridges.

This type of bridge should be distinguished from an unrelated meaning of "bridge" in graph theory, a subgraph separated from the rest of the graph by a specified subset of vertices; see bridge.

Trees and forests

A graph with [math]\displaystyle{ n }[/math] nodes can contain at most [math]\displaystyle{ n-1 }[/math] bridges, since adding additional edges must create a cycle. The graphs with exactly [math]\displaystyle{ n-1 }[/math] bridges are exactly the trees, and the graphs in which every edge is a bridge are exactly the forests.

In every undirected graph, there is an equivalence relation on the vertices according to which two vertices are related to each other whenever there are two edge-disjoint paths connecting them. (Every vertex is related to itself via two length-zero paths, which are identical but nevertheless edge-disjoint.) The equivalence classes of this relation are called 2-edge-connected components, and the bridges of the graph are exactly the edges whose endpoints belong to different components. The bridge-block tree of the graph has a vertex for every nontrivial component and an edge for every bridge.[2]

Relation to vertex connectivity

Bridges are closely related to the concept of articulation vertices, vertices that belong to every path between some pair of other vertices. The two endpoints of a bridge are articulation vertices unless they have a degree of 1, although it may also be possible for a non-bridge edge to have two articulation vertices as endpoints. Analogously to bridgeless graphs being 2-edge-connected, graphs without articulation vertices are 2-vertex-connected.

In a cubic graph, every cut vertex is an endpoint of at least one bridge.

Bridgeless graphs

A bridgeless graph is a graph that does not have any bridges. Equivalent conditions are that each connected component of the graph has an open ear decomposition,[3] that each connected component is 2-edge-connected, or (by Robbins' theorem) that every connected component has a strong orientation.[3]

An important open problem involving bridges is the cycle double cover conjecture, due to Seymour and Szekeres (1978 and 1979, independently), which states that every bridgeless graph admits a multi-set of simple cycles which contains each edge exactly twice.[4]

Tarjan's bridge-finding algorithm

The first linear time algorithm for finding the bridges in a graph was described by Robert Tarjan in 1974.[5] It performs the following steps:

  • Find a spanning forest of [math]\displaystyle{ G }[/math]
  • Create a rooted forest [math]\displaystyle{ F }[/math] from the spanning forest
  • Traverse the forest [math]\displaystyle{ F }[/math] in preorder and number the nodes. Parent nodes in the forest now have lower numbers than child nodes.
  • For each node [math]\displaystyle{ v }[/math] in preorder (denoting each node using its preorder number), do:
    • Compute the number of forest descendants [math]\displaystyle{ ND(v) }[/math] for this node, by adding one to the sum of its children's descendants.
    • Compute [math]\displaystyle{ L(v) }[/math], the lowest preorder label reachable from [math]\displaystyle{ v }[/math] by a path for which all but the last edge stays within the subtree rooted at [math]\displaystyle{ v }[/math]. This is the minimum of the set consisting of the preorder label of [math]\displaystyle{ v }[/math], of the values of [math]\displaystyle{ L(w) }[/math] at child nodes of [math]\displaystyle{ v }[/math] and of the preorder labels of nodes reachable from [math]\displaystyle{ v }[/math] by edges that do not belong to [math]\displaystyle{ F }[/math].
    • Similarly, compute [math]\displaystyle{ H(v) }[/math], the highest preorder label reachable by a path for which all but the last edge stays within the subtree rooted at [math]\displaystyle{ v }[/math]. This is the maximum of the set consisting of the preorder label of [math]\displaystyle{ v }[/math], of the values of [math]\displaystyle{ H(w) }[/math] at child nodes of [math]\displaystyle{ v }[/math] and of the preorder labels of nodes reachable from [math]\displaystyle{ v }[/math] by edges that do not belong to [math]\displaystyle{ F }[/math].
    • For each node [math]\displaystyle{ w }[/math] with parent node [math]\displaystyle{ v }[/math], if [math]\displaystyle{ L(w) = w }[/math] and [math]\displaystyle{ H(w) \lt w + ND(w) }[/math] then the edge from [math]\displaystyle{ v }[/math] to [math]\displaystyle{ w }[/math] is a bridge.

Bridge-finding with chain decompositions

A very simple bridge-finding algorithm[6] uses chain decompositions. Chain decompositions do not only allow to compute all bridges of a graph, they also allow to read off every cut vertex of G (and the block-cut tree of G), giving a general framework for testing 2-edge- and 2-vertex-connectivity (which extends to linear-time 3-edge- and 3-vertex-connectivity tests).

Chain decompositions are special ear decompositions depending on a DFS-tree T of G and can be computed very simply: Let every vertex be marked as unvisited. For each vertex v in ascending DFS-numbers 1...n, traverse every backedge (i.e. every edge not in the DFS tree) that is incident to v and follow the path of tree-edges back to the root of T, stopping at the first vertex that is marked as visited. During such a traversal, every traversed vertex is marked as visited. Thus, a traversal stops at the latest at v and forms either a directed path or cycle, beginning with v; we call this path or cycle a chain. The ith chain found by this procedure is referred to as Ci. C=C1,C2,... is then a chain decomposition of G.

The following characterizations then allow to read off several properties of G from C efficiently, including all bridges of G.[6] Let C be a chain decomposition of a simple connected graph G=(V,E).

  1. G is 2-edge-connected if and only if the chains in C partition E.
  2. An edge e in G is a bridge if and only if e is not contained in any chain in C.
  3. If G is 2-edge-connected, C is an ear decomposition.
  4. G is 2-vertex-connected if and only if G has minimum degree 2 and C1 is the only cycle in C.
  5. A vertex v in a 2-edge-connected graph G is a cut vertex if and only if v is the first vertex of a cycle in C - C1.
  6. If G is 2-vertex-connected, C is an open ear decomposition.

See also

Notes

  1. Modern Graph Theory, Graduate Texts in Mathematics, 184, New York: Springer-Verlag, 1998, p. 6, doi:10.1007/978-1-4612-0619-4, ISBN 0-387-98488-7, https://books.google.com/books?id=SbZKSZ-1qrwC&pg=PA6 .
  2. "Maintaining bridge-connected and biconnected components on-line", Algorithmica 7 (5-6): 433–464, 1992, doi:10.1007/BF01758773 .
  3. 3.0 3.1 "A theorem on graphs, with an application to a problem of traffic control", The American Mathematical Monthly 46: 281–283, 1939, doi:10.2307/2303897 .
  4. Jaeger, F. (1985), "A survey of the cycle double cover conjecture", Annals of Discrete Mathematics 27 – Cycles in Graphs, North-Holland Mathematics Studies, 27, pp. 1–12, doi:10.1016/S0304-0208(08)72993-1 .
  5. "A note on finding the bridges of a graph", Information Processing Letters 2 (6): 160–161, 1974, doi:10.1016/0020-0190(74)90003-9 .
  6. 6.0 6.1 "A Simple Test on 2-Vertex- and 2-Edge-Connectivity", Information Processing Letters 113 (7): 241–244, 2013, doi:10.1016/j.ipl.2013.01.016 .