Chemistry:Zincke–Suhl reaction

From HandWiki

The Zincke–Suhl reaction is a special case of a Friedel-Crafts alkylation and was first described by Theodor Zincke and Suhl in 1906.[1][2][3] Unlike the traditional Friedel-Crafts reaction, the reduction of the phenyl ring leads to a higher energy final product that can be used as starting material in the dienol–benzene rearrangement, among other reactions.

Zincke–Suhl reaction

The classic example of this reaction is the conversion of p-cresol to a cyclohexadienone (with the aid of aluminium chloride as a catalyst and tetrachloromethane as a solvent). Melvin Newman, a scientist from the United States intensively studied the reaction in the 1950s and reported several improved procedures as well as mechanistic studies. Since then, studies investigating the impact of alternate reagents have been conducted by others.[4][5]

Mechanism

Zincke-Suhl-Reaktion-Mechanismus

Aluminum chloride plays a range of functions in this reaction,[1] first reacting with p-cresol to form phenoxy aluminum chloride along with a molecule of hydrogen chloride. Additionally, aluminum chloride activates a molecule of tetrachloride that in turn is subjected to a nucleophilic attack by the phenoxy aluminum chloride. Subsequently, the product interacts with aluminum chloride and tetrachloride again to form a loose complex. Finally, the product is treated with water, resulting in the final product.

Catalysts

During a series of tests, Newman found that utilization of carbon disulfide as a solvent was demonstrated to improve the yield.[1] As an example, addition of a solution of p-cresol and carbon disulfide to a suspension of aluminum chloride and carbon disulfide resulted in a 20% improvement in yield.

Yields Obtained from the Zincke-Suhl Reaction Under Different Conditions[1]
P-cresol (mol) CCl4 (mol) AlCl3 (mol) Solvent Temperature (C) Time Yield
0.2 0.4 0.26 CCl4 Reflux 120 40.0
0.05 0.05 0.063 CS2 5 120 56.0
0.05 0.05 0.063 CS2 45 120 60.3

Applications

Zincke-Suhl products can be used as starting reagents for the dienol benzene rearrangement. This is an important reaction for artificially producing biologically relevant molecules including the A ring of steroids.[6]

Dienol Benzene Rearrangement[7][8]

Perhaps the most intriguing application of the Zincke–Suhl reaction is its potential following von Auwers rearrangements. Demeunier and Jaeckh described how such rearrangements may result in the formation of high energy intermediates.[9] For example, reformation of the aromatic ring from the semibenzene (cyclohexadienone) follows an energy drop of just under 36 kcal/mol. Such staunch drops have been experimentally shown to lead to efficient aromatization with high yields.

Known von Auwers Rearrangements[9]

Other products including dioxocins and polymers can form depending upon the location of the initial addition of carbon tetrachloride.[2][4] Furthermore, changes to the reagents such as the use of chloroform instead of carbon tetrachloride can form additional products.[4][5]

Ortho-Addition to Phenoxy Aluminum Chloride (Re-updated)

Above: Ortho-addition of tetrachloride to phenoxy aluminum chloride can produce 6,12-diphenyl-2,8-dimethyl-6,12-epoxy-6H, 12H-dibenzo[b,f][1,5] dioxocin, a high-melting, white polymer.

References

  1. 1.0 1.1 1.2 1.3 M Newman. A Study of the Zincke and Suhl Reaction, J. Am. Chem. Soc. 19(6) (1954) p978
  2. 2.0 2.1 M Newman. The Aluminum Chloride-catalyzed Reaction of Benzotrichloride with p-Cresol, J. Am. Chem. Soc. 19(6) (1954) p985
  3. Zincke, Th.; Suhl, R. (1906). "Ueber die Einwirkung von Tetrachlorkohlenstoff und Aluminiumchlorid auf p-Kresol und p-Kresolderivate". Chemische Berichte 39 (4): 4148–4153. doi:10.1002/cber.190603904115. https://zenodo.org/record/1426194. 
  4. 4.0 4.1 4.2 Merchant, J.R.; Desai, V.B. (1968). "Synthesis and reactions of some cyclohexadienones. Part II.". Journal of the Chemical Society C: Organic 16: 499–503. doi:10.1039/j39680000499. 
  5. 5.0 5.1 V. Sergeev, S; A. Nikanorov, V; I. Rozenberg, V; A. Reutov, O (1988-04-01). "Possibility of the formation of chlorosubstituted tropone rings under Zincke-Suhl reaction conditions". Russian Chemical Bulletin 37 (4): 790–792. doi:10.1007/BF01455507. https://www.researchgate.net/publication/243995483. 
  6. Hanson, James R. (2005-03-01). "The general dienol : benzene rearrangement of ring A of the steroids" (in en). Journal of Chemical Research 2005 (3): 141–146. doi:10.3184/0308234054213663. ISSN 1747-5198. 
  7. "Dienol-Benzene Rearrangement" (in en). Comprehensive Organic Name Reactions and Reagents. Hoboken, NJ, USA: John Wiley & Sons, Inc.. 2010-09-15. pp. 897–899. doi:10.1002/9780470638859.conrr192. ISBN 9780470638859. 
  8. Vitullo, V.P.; Cashen, Michael J. (1973-01-01). "Mechanistic aspects of the dienol-benzene rearrangement" (in en). Tetrahedron Letters 14 (48): 4823–4826. doi:10.1016/S0040-4039(01)87346-9. ISSN 0040-4039. 
  9. 9.0 9.1 Dumeunier, Raphael; Jaeckh, Simon (2014). "The von Auwers Reaction – History and Synthetic Applications". CHIMIA International Journal for Chemistry 68 (7): 522–530. doi:10.2533/chimia.2014.522. PMID 25437394. http://www.ingentaconnect.com/search/article?option1=tka&value1=von+Auwers&pageSize=10&index=1.