Company:Weber carburetor

From HandWiki
Weber
IndustryAutomotive industry
Founded1923 (1923)
Headquarters
Italy
Area served
Worldwide
1961 Ferrari 250TR Spider engine fitted with six Weber two-barrel downdraft carburetors.
Weber 45DCOE9. The model code is stamped on the cover of the float chamber, after the word "TIPO" (type).


History

Eduardo Weber began his automotive career working for Fiat, first at their Turin plant (in 1914) and later at a dealership in Bologna. After WWI, with gasoline prices high, he reached a certain success in selling conversion kits for running trucks on kerosene instead.[1] The company was established as Fabbrica Italiana Carburatori Weber in 1923 when Weber produced carburetors as part of a conversion kit for Fiats. Weber pioneered the use of two-stage twin-barrel carburetors, with two venturis of different sizes (the smaller one for low-speed running and the larger one optimised for high-speed use).

In the 1930s, Weber began producing twin-barrel carburetors for motor racing, where two barrels of the same size were used. These were arranged so that each cylinder of the engine had its own carburetor barrel. These carburetors found use in Maserati and Alfa Romeo racing cars. Twin updraft Weber carburetors fed superchargers on the 1938 Alfa Romeo 8C competition vehicles.[2]

Fiat assumed control of the company in 1952 following Weber's disappearance in 1945. In time, Weber carburetors were fitted to standard production cars and factory racing applications from Automotive industry marques such as Abarth, Alfa Romeo, Aston Martin, BMW, Chrysler, Ferrari, Fiat, Ford, IKA, Lamborghini, Lancia, Lotus, Maserati, Morgan, Porsche, Renault, Triumph and Volkswagen.

In 1986, Fiat also took control of Weber competitor Solex, and merged the two into a single company (Raggruppamento Controllo Motore, or the "Engine Management Group"). This was then reorganized as Magneti Marelli Powertrain S.p.A. in 1986.[3] Genuine Weber carburetors were produced in Bologna, Italy, up until 1992, when production was transferred to Madrid, Spain, where they continue to be made today.[1] Weber carburettors are made in a facility owned by LCN Automotive [4] based in Spain. There are only two direct distributors of Spanish Weber carburetors - Webcon[5] based in the UK and WorldPac known as RedlineWeber[6] in the US. Webcon operate a Global distribution chain via a long established network of Dealers and specialists, many of whom are located in the EU.

Modern use

In modern times, fuel injection has replaced carburetors in both production cars and most modern motor racing, although Weber carburetors are still used extensively in classic and historic racing. They are also supplied as high-quality replacements for problematic OEM carburetors. Weber fuel system components are distributed by Magneti Marelli, Webcon UK Ltd., and, in North America, by several organizations, including Worldpac, marketing under the Redline name. Other suppliers include Overseas Distributing, Pierce Manifolds & Lynx Weber in Australia [citation needed]

Weber carburetors are sold for both street and off-road use, with the twin-choke sidedraft DCOE (Doppio Corpo Orizzontale E; "Double-Body Horizontal E") being the most common one. They are sold in what is referred to as a Weber conversion kit. A Weber conversion kit is a complete upgrade package consisting of a Weber carburetor, intake manifold or manifold adapter, throttle linkage, air filter, and all of the hardware needed for installation on a vehicle.

Model codes

Weber carburetors are marked with a model code on the mounting flange, the body, or on the cover of the float chamber.[7] This begins with a number which originally indicated the diameter (in millimetres) of the throttle bore, but later lost this significance. If this number has a single pair of digits, both chokes are of the same diameter and operate together; if it has two pairs of digits separated by a stroke (e.g. 28/36), there are primary and secondary chokes that are opened one after the other, usually of differing diameter.[8]

These numbers are followed by a group of letters, which indicate various features: the DCOE is a sidedraft unit, all others being downdraft; the DCD has a piston-type starter valve as opposed to a strangler choke; and so on.[9] After the letters there will be a further number, which may be followed by a letter, e.g. 4B, 13A; these indicate the series, which in turn almost always indicates the original equipment fitment of the product.[10] The full designation might be 40 DCOE 29, 45 DCOE 9, etc.[11]

Copies

DCOE, IDF, IDA or DGV carburetors can be found made by other companies, like EMPI, FAJS or REEDMORAL, LOREADA, often at half the price of the originals. Often these are called 'fake'[12] by Weber users. All copies are manufactured in China and are 100% copy, so all parts are interchangeable. Operation however may vary from the original, due to inaccurate drilling and poorly calibrated parts. Mostly noticeable during idle or cruise. Although internal parts can be swapped for original[13]

Setting

Proper carburetor jetting is based on engine displacement, RPM and engine usage. Either one or more carburetors connected to each other are used. For small engines, even only one half of the carburetor was used, with the other half blinded and partially cut off. The basic carburetor size can be selected by the butterfly valves, for DCO/DCOE the sizes are 38/40/42/45/48/50/55, with 40/45/48/50/55 being more common and available today. Jet size is based on choke size, and choke size is just based on engine displacement, RPM and application. Today you can simplify the calculation work and use an online jetting calculator [14] or go trhough the jetting tables and match your case.[15]

See also

  • List of Italian companies

Notes

  1. ↑ 1.0 1.1 LaChance, David (March 2012). "Supply Side: Weber". Hemmings Sports & Exotic Car (Bennington, VT: Hemmings Motor News) 7 (7): 64. ISSN 1555-6867. 
  2. ↑ Thompson, Jonathan (September 1964). "Scale Plan Series: 1935-37 8C 35, 12C 36 and 12C 37 Alfa Romeos". Model Car & Track 1 (6): 30. http://www.vsrnonline.com/Mags/MCT/Plan5_p7.jpg. Retrieved 2012-05-16. 
  3. ↑ magnetimarelli.com
  4. ↑ lcn.es
  5. ↑ Webcon
  6. ↑ RedlineWeber
  7. ↑ Penberthy, Ian (1988). Thacker, Tony. ed. How to Restore Fuel Systems and Carburettors. Osprey Restoration Guide. London: Osprey Publishing. p. 84. 15. ISBN 0-85045-784-X. 
  8. ↑ Penberthy 1988, pp. 84, 86
  9. ↑ Penberthy 1988, pp. 84, 86, 97
  10. ↑ Penberthy 1988, pp. 86, 96
  11. ↑ Penberthy 1988, p. 95
  12. ↑ weberperformance.com.au
  13. ↑ carbparts.eu
  14. ↑ Jetting calculator
  15. ↑ Jetting table

References

  • Weber Carburettors Owners Workshop Manual, Haynes Publishing, ISBN:0-85696-393-3
  • Weber Carburetors, Pat Braden, ISBN:0-89586-377-4
  • Weber Tuning Manual, available from Webcon UK Ltd

External links




Retrieved from "https://handwiki.org/wiki/index.php?title=Company:Weber_carburetor&oldid=2703712"