Earth:Global Relief Model
Terminology
File:Earth dry elevation.stl A global relief model, sometimes also denoted as global topography model or composite model, combines digital elevation model (DEM) data over land with digital bathymetry model (DBM) data over water-covered areas (oceans, lakes) to describe Earth’s relief. A relief model thus shows how Earth’s surface would look like in the absence of water or ice masses.
The relief is represented by a set of heights (elevations or depths) that refer to some height reference surface, often the mean sea level or the geoid. Global relief models are used for a variety of applications including visualisation, geological, geomorphological and geophysical analyses, gravity field modelling as well as geo-statistics.
Measurement
Global relief models are always based on combinations of data sets from different remote sensing techniques. This is because there is no single remote sensing technique that would allow measurement of the relief both over dry and water-covered areas. Elevation data over land is often obtained from LIDAR or inSAR measurements, while bathymetry is acquired based on SONAR and altimetry. Global relief models may also contain elevations of the bedrock (sub-ice-topography) below the ice shields of Greenland and Antarctica. Ice sheet thickness, mostly measured through ice-penetrating RADAR, is subtracted from the ice surface heights to reveal the bedrock.
Spatial resolution
While digital elevation models describe Earth’s land topography often with 1 to 3 arc-second resolution (e.g., from the SRTM or ASTER missions), the global bathymetry (e.g., SRTM30_PLUS) is known to a much lesser spatial resolution in the kilometre-range. The same holds true for models of the bedrock of Antarctica and Greenland. Therefore, global relief models are often constructed at 1 arc-min resolution (corresponding to about 1.8 km postings), Some products such as the 30 and 15 arc-sec resolution SRTM30_PLUS/ SRTM15_PLUS grids offer higher resolution to adequately represent SONAR depth measurements where available.
Public data sets
Data sets produced and released to the public include Earth2014, SRTM30_PLUS and ETOPO1.
Earth2014 (2015)
The most recent global relief model is Earth2014,[1] developed at Curtin University (Western Australia) and TU Munich (Germany). Earth2014 provides sets of 1 arc-min resolution global grids of Earth's relief in different representations based on the 2013 releases of bedrock and ice-sheet data over Antarctica (Bedmap2) and Greenland (Greenland Bedrock Topography), the 2013 SRTM_30PLUS bathymetry and 2008 SRTM V4.1 SRTM land topography.
Earth2014 provides five different layers of height data, comprising Earth’s surface (lower interface of the atmosphere), topography and bathymetry of the oceans and major lakes, topography, bathymetry and bedrock, ice-sheet thicknesses and rock-equivalent topography. The Earth2014 global grids are provided as heights relative to the mean sea level, and as planetary radii relative to the centre of Earth, which show the shape of the Earth.
SRTM30_PLUS (2014)
SRTM30_PLUS[2] is a combined bathymetry and topography model produced by Scripps Institution of Oceanography (California). The version 15_PLUS comes at 0.25 arc-min resolution (about 450 m postings), while the 30_PLUS version offers 0.5 arc-min (900 m) resolution. The bathymetric data in SRTM30_PLUS stems from depth soundings (SONAR) and from satellite altimetry. The bathymetric component of SRTM30_PLUS gets regularly updated with new or improved data sets in order to continuously improve and refine the description of the sea floor geometry. Over land areas, SRTM30 data from the USGS is included. SRTM30_PLUS provides background information for Google Earth and Google Maps.
ETOPO1 (2009)
The ETOPO1[3] 1-arcmin global relief model, produced by the National Geophysical Data Center (Colorado), provides two layers of relief information. One layer represents the global relief including bedrock over Antarctica and Greenland, and another layer the global relief including ice surface heights. Both layers include bathymetry over the oceans and some of Earth’s major lakes. ETOPO1 land topography and ocean bathymetry relies on SRTM30 topography and a multitude of bathymetric surveys that have been merged. Historic versions of ETOPO1 are the ETOPO2 and ETOPO5 relief models (2 and 5 arc-min resolution). The ETOPO1 global relief model is based on the 2001 Bedmap1 model of bedrock over Antarctica, which is now superseded by the significantly improved Bedmap2 bedrock data. The ETOPO1-contained information on ocean depths is superseded through several updates of the SRTM30_PLUS bathymetry.
References
- ↑ Hirt, C.; Rexer, M.. "Earth2014: 1 arc-min shape, topography, bedrock and ice-sheet models - available as gridded data and degree-10,800 spherical harmonics". International Journal of Applied Earth Observation and Geoinformation 39: 103–112. doi:10.1016/j.jag.2015.03.001. http://ddfe.curtin.edu.au/models/Earth2014/Hirt_Rexer2015_Earth2014.pdf. Retrieved February 20, 2016.
- ↑ Sandwell, D.. "New global marine gravity model from CryoSat-2 and Jason-1 reveals buried tectonic structure". Science 346 (6205): 65–67. doi:10.1126/science.1258213. PMID 25278606.
- ↑ Amante, C.; Eakins, B.W.. "ETOPO1 1 Arc-Minute Global Relief Model: Procedures, Data Sources and Analysis". NOAA Technical Memorandum NESDIS NGDC-24. doi:10.7289/V5C8276M.
External links
 |
