Engineering:Aces High Cuby

From HandWiki
Cuby
Role Kit aircraft
National origin Canada
Manufacturer Aces High Light Aircraft
Designer Al Jasmine
Introduction 1988
Status no longer in production
Number built More than 200 Cuby IIs

The Aces High Cuby is a family of Canada single engine, high wing, strut-braced, light sports planes with conventional landing gear that was marketed for homebuilding by Aces High Light Aircraft of London, Ontario.[1][2][3]

The aircraft design was available in two versions, the single-seat Cuby I and side-by-side two-seat Cuby II. Aces High went out of business in the 1990s and the kits are no longer available.

Development

The Cuby fuselage is constructed from welded 4130 steel tubing, covered with aircraft fabric. The wings are built around an aluminum spar and D-cell and also fabric-covered. The conventional landing gear includes bungee-suspended main wheels and a steerable tail wheel.[1]

The controls are conventional three-axis, with no flaps fitted to the wing. The aircraft were available as kits or as completed aircraft and were designed to look and fly similarly to a Piper J-3 Cub. The kit price for the Cuby I was United States dollar 11,350, including the propeller and 28 hp (21 kW) Rotax 277 engine.[1]

The Cuby II features a 38 in (97 cm) wide cabin and a large baggage compartment behind the side-by-side seats. The aircraft was certified and put into production in Hungary for sale in Europe. In North America the Cuby II was sold for US$15,662.76, complete with propeller, 50 hp (37 kW) Rotax 503 powerplant, paint and fabric in 1988. Available options included folding wings, floats and an agricultural spray kit.[2][3]

Reviewer Ken Armstrong, flying the Cuby II prototype with the 42 hp (31 kW) single carburetor version of the Rotax 503 said:

Variants

Cuby I
Single seat, standard engine 28 hp (21 kW) Rotax 277, qualified as a US FAR 103 Ultralight Vehicle with an empty weight of 250 lb (113 kg) and as Canadian basic ultra-light, advanced ultra-light or amateur-built aircraft[1][3][4]
Cuby II
Two seat, standard engine 50 hp (37 kW) Rotax 503, qualified as a US amateur-built and Canadian basic ultra-light, advanced ultra-light or amateur-built aircraft. More than 200 completed and flying.[3][4]

Specifications (Cuby II)

General characteristics

  • Crew: one, pilot
  • Capacity: 1 passenger
  • Length: 5.56 m (18 ft 3 in)
  • Wingspan: 10.21 m (33 ft 6 in)
  • Height: 1.77 m (5 ft 10 in)
  • Wing area: 15 m2 (161 sq ft)
  • Aspect ratio: 6.95
  • Empty weight: 188 kg (413 lb)
  • Gross weight: 480 kg (1,058 lb)
  • Powerplant: 1 × Rotax 503 , 39 kW (52 hp)

Performance

  • Maximum speed: 160 km/h (100 mph, 86 kn)
  • Range: 230 km (143 mi, 124 nmi)
  • Rate of climb: 3.6 m/s (700 ft/min)

See also

Aircraft of comparable role, configuration and era

Related lists

References

  1. 1.0 1.1 1.2 1.3 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-13. Cybair Limited Publishing, 2001. ISBN:0-9680628-1-4
  2. 2.0 2.1 2.2 Armstrong, Kenneth: Choosing Your Homebuilt – the one you will finish and fly! Second Edition, pages 163–165. Butterfield Press, 1993. ISBN:0-932579-26-4
  3. 3.0 3.1 3.2 3.3 Purdy, Don: AeroCrafter – Homebuilt Aircraft Sourcebook, page 89. BAI Communications. ISBN:0-9636409-4-1
  4. 4.0 4.1 Transport Canada (September 2009). "Listing of Models Eligible to be Registered as Advanced Ultra-Light Aeroplanes (AULA)". Archived from the original on 2009-04-29. https://web.archive.org/web/20090429055829/http://home.att.net/~jbaugher1/f4_41.html. Retrieved 2009-10-01. 

External links