Engineering:Conditional short-circuit current
From HandWiki
Conditional short-circuit current is the value of the alternating current component of a prospective current, which a switch without integral short-circuit protection, but protected by a suitable short circuit protective device (SCPD) in series, can withstand for the operating time of the current under specified test conditions. It may be understood to be the RMS value of the maximum permissible current over a specified time interval (t0,t1) and operating conditions. The IEC[1] definition is critiqued to be open to interpretation.[2]
[math]\displaystyle{ I = \sqrt {\frac{1}{t_1-t_0} \int_{t_0}^{t_1} i^2(t) dt } }[/math]
References
- ↑ IEC 62314-1, The International Standard on Solid-State Relays, Ed 1, Section 3.1.11
- ↑ Gurevich, Vladimir (2011). Digital protective relays: problems and solutions. Boca Raton: CRC Press. p. 360. ISBN 978-1-4398-3785-6.
 |  |
