Engineering:Enterprise and Data Center Standard Form Factor

From HandWiki
Short description: Family of form factors for SSDs


The Enterprise and Data Center Standard Form Factor or EDSFF, previously known as the Enterprise and Data Center SSD Form Factor, is a family of SSD form factors for use in data center servers that is being developed by the Small Form Factor Technology Affiliate technical work group, which is itself under the organizational stewardship of the Storage Networking Industry Association.[1]

As a family of form factors, it defines specifications for the mechanical dimensions and electrical interfaces devices should have, to ensure compatibility between disparate hardware manufacturers. The standard is meant to replace the U.2 form factors for drives used in data centers.[1] ESDFF provides a pure NVMe over PCIe interface. One common way to provide ESDFF connections on the motherboard is through MCIO connectors.

EDSFF SSDs are made in six sizes: E1.L (Long) and E1.S (Short), E2.L and E2.S, and E3.L and E3.S. [2]

Samsung's NGSFF (also known as M.3 or NF1) form factor competes with EDSFF.[3]

See also

References

  1. ↑ 1.0 1.1 Hands, Jonmichael. "EDSFF – A Dynamic Family of Form Factors for Data Center SSDs". https://www.snia.org/sites/default/files/SSSI/OCP%20EDSFF%20JM%20Hands.pdf. 
  2. ↑ "SFF-TA-1008 Enterprise and Datacenter Device Form Factor (E3) 2.0". 6 November 2020. https://members.snia.org/document/dl/26716. 
  3. ↑ "PCI-SIG Warns of Incompatibilities Between M.2 and Samsung's NGSFF/NF1". https://www.anandtech.com/show/13609/pcisig-warns-of-incompatibilities-between-m2-and-samsungs-ngsff. 

External links



Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Enterprise_and_Data_Center_Standard_Form_Factor&oldid=3262625"