Engineering:Heritage 35
| Development | |
|---|---|
| Designer | McCurdy & Rhodes |
| Location | Canada |
| Year | 1974 |
| No. built | 14 |
| Builder(s) | Heritage Yacht Builders |
| Role | Cruiser |
| Boat | |
| Boat weight | 13,700 lb (6,214 kg) |
| Draft | 5.50 ft (1.68 m) |
| Hull | |
| Type | monohull |
| Construction | fibreglass |
| LOA | 36.08 ft (11.00 m) |
| LWL | 26.62 ft (8.11 m) |
| Beam | 10.17 ft (3.10 m) |
| Engine type | Westerbeke MG1500 diesel engine |
| Hull appendages | |
| Keel/board type | fin keel |
| Ballast | 6,250 lb (2,835 kg) |
| Rudder(s) | skeg-mounted/internally-mounted spade-type/transom-mounted rudder |
| Rig | |
| Rig type | Bermuda rig |
| I (foretriangle height) | 42.80 ft (13.05 m) |
| J (foretriangle base) | 14.30 ft (4.36 m) |
| P (mainsail luff) | 37.30 ft (11.37 m) |
| E (mainsail foot) | 13.40 ft (4.08 m) |
| Sails | |
| Sailplan | masthead sloop |
| Mainsail area | 249.91 sq ft (23.217 m2) |
| Jib/genoa area | 306.02 sq ft (28.430 m2) |
| Total sail area | 555.93 sq ft (51.648 m2) |
|
| |
The Heritage 35 is a Canadian sailboat that was designed by Americans McCurdy & Rhodes as a cruiser and first built in 1974.[1][2][3][4]
Production
The design was built by Heritage Yacht Builders in Oakdale, Ontario, Canada. The company built 14 boats between 1974 and 1977. The moulds were then purchased by Grampian Marine of Oakville, Ontario, but that company went out of business later in 1977, before producing any boats.[1][2]
The Heritage 35 design was later developed into the Intrepid 35, using the same tooling and moulds.[1][2][5][6]
Design
The Heritage 35 is a recreational keelboat, built predominantly of fibreglass, with wood trim. It has a masthead sloop rig; a raked stem; a raised counter, reverse transom; a skeg-mounted rudder controlled by a tiller and a fixed fin keel. It displaces 13,700 lb (6,214 kg) and carries 6,250 lb (2,835 kg) of ballast.[1][2]
The boat has a draft of 5.50 ft (1.68 m) with the standard keel.[1][2]
The boat is fitted with a Westerbeke MG1500 diesel engine for docking and manoeuvring. The fuel tank holds 40 U.S. gallons (150 L; 33 imp gal) and the fresh water tank has a capacity of 125 U.S. gallons (470 L; 104 imp gal).[1][2]
The design has sleeping accommodation for five people, with a double "V"-berth in the bow cabin, two straight settee berths in the main cabin and an aft berth on the port side. The galley is located on the starboard side just forward of the companionway ladder. The galley is L-shaped and is equipped with a stove, an ice box and a sink. A navigation station is opposite the galley, on the port side. The head is located just aft of the bow cabin on the port side.[1][2]
The design has a hull speed of 6.91 kn (12.80 km/h).[2]
See also
References
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 McArthur, Bruce (2022). "Heritage 35 sailboat". sailboatdata.com. https://sailboatdata.com/sailboat/heritage-35.
- ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Sea Time Tech, LLC (2022). "Heritage 35". sailboat.guide. https://sailboat.guide/heritage-35.
- ↑ McArthur, Bruce (2022). "McCurdy & Rhodes". sailboatdata.com. https://sailboatdata.com/designer/mccurdy-rhodes.
- ↑ Sea Time Tech, LLC (2022). "McCurdy & Rhodes". sailboat.guide. https://sailboat.guide/mccurdy-rhodes.
- ↑ McArthur, Bruce (2022). "Intrepid 35 sailboat". sailboatdata.com. https://sailboatdata.com/sailboat/intrepid-35.
- ↑ Sea Time Tech, LLC (2022). "Intrepid 35". sailboat.guide. https://sailboat.guide/cape-dory/intrepid-35.
External links
 |  |
