Engineering:INTA-300
The INTA-300, also known as the "Flamenco", was a two-stage Spanish sounding rocket. It consisted of a launch stage from the type Heron and an upper stage of the type Snipe.
Based on a Bristol Aerojet's INTA-255 rocket, the INTA-300 is capable of reaching altitudes of 300 km (186 mi) alone and to 50 km (31 mi) with its maximum payload weight,[1] having a thrust of 138.00 kN.
The intent of the INTA-300 was to be able to lift a payload of 50 kg to 300 km. With the help of the Bristol Aerojet, the Instituto Nacional de Técnica Aeroespacial was able to make a powerful enough prototype in 1981, after three unsuccessful launches. By the time of the fourth model's construction, funding had been cut.[2]
When funds became available again in the 1990s, the fourth model of the INTA-300 was modified into a more efficient model dubbed the INTA-300B, capable of carrying heavier payloads and reaching higher altitude.[3]
Launches
The INTA-300 was launched by INTA six times between 1974 and 1994 from El Arenosillo.[2]
Date | Launch Vehicle | Mission Type | Nation | Apogee | Notes |
---|---|---|---|---|---|
October 9, 1974 | INTA-300 | Test mission | Germany | 254 km | Failed to reach expected altitude |
October 21, 1975 | INTA-300 | Aeronomy / test | Germany | 240 km | Failed to reach expected altitude |
June 28, 1978 | INTA-300 | FAILURE | Spain | 0 km | Failure |
February 18, 1981 | INTA-300 | Aeronomy mission | Spain | 285 km | First completely successful launch |
October 21, 1993 | INTA-300B | FEIROX / FEIROH Aeronomy | Spain | 154 km | |
April 16, 1994 | INTA-300B | O2-INTA300 Aeronomy | Spain | 156 km |
See also
References
- ↑ "IAA scientific programme committee". Acta Astronautica 33: ix. July 1994. doi:10.1016/0094-5765(94)90099-x. ISSN 0094-5765. Bibcode: 1994AcAau..33D...9..
- ↑ 2.0 2.1 "INTA-300". http://www.astronautix.com/i/inta-300.html.
- ↑ "INTA-300B". 2016-12-27. http://astronautix.com/i/inta-300b.html.
Original source: https://en.wikipedia.org/wiki/INTA-300.
Read more |