Engineering:Lancer 29 Mark III
| Development | |
|---|---|
| Designer | C&C Design |
| Location | United States |
| Year | 1977 |
| Builder(s) | Lancer Yachts |
| Role | Cruiser |
| Boat | |
| Boat weight | 7,800 lb (3,538 kg) |
| Draft | 5.17 ft (1.58 m) |
| Hull | |
| Type | monohull |
| Construction | fiberglass |
| LOA | 28.67 ft (8.74 m) |
| LWL | 23.50 ft (7.16 m) |
| Beam | 10.00 ft (3.05 m) |
| Engine type | Yanmar 8 to 15 hp (6 to 11 kW) diesel engine/outboard motor |
| Hull appendages | |
| Keel/board type | fin keel |
| Ballast | 3,000 lb (1,361 kg) |
| Rudder(s) | skeg-mounted rudder |
| Rig | |
| Rig type | Bermuda rig |
| I (foretriangle height) | 35.00 ft (10.67 m) |
| J (foretriangle base) | 12.83 ft (3.91 m) |
| P (mainsail luff) | 30.00 ft (9.14 m) |
| E (mainsail foot) | 10.00 ft (3.05 m) |
| Sails | |
| Sailplan | masthead sloop |
| Mainsail area | 150.00 sq ft (13.935 m2) |
| Jib/genoa area | 224.53 sq ft (20.860 m2) |
| Total sail area | 374.53 sq ft (34.795 m2) |
The Lancer 29 Mark III, also called the Lancer 29-3, is an American sailboat that was designed by C&C Design as a cruiser and first built in 1977. In 1982 the boat was renamed the Lancer 30.[1][2][3]
The Lancer 29 Mark III is thought to have been built using the molds for the C&C 30, hence the design credit to C&C Design. There was no Lancer 29 Mark I or II, but the C&C 30 was produced in Mark I and Mark II versions.[1][3][4][5]
The Lancer 29 Mark III is sometimes confused with the unrelated Lancer 29 PS power sailer.[1][3]
Production
The design was built by Lancer Yachts in the United States from 1977 until 1981, but it is now out of production.[1][3][6]
Design
The Lancer 29 Mark III is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a raked stem, a plumb transom, a skeg-mounted rudder and a fixed fin keel. It displaces 7,800 lb (3,538 kg) and carries 3,000 lb (1,361 kg) of ballast.[1][3]
The boat has a draft of 5.17 ft (1.58 m) with the standard keel and 4.17 ft (1.27 m) with the optional shoal draft keel.[1][3]
The boat may be optionally fitted with a Japanese Yanmar diesel engine of 8 hp (6 kW), 12 hp (9 kW) or 15 hp (11 kW), or a 15 hp (11 kW) gasoline engine for docking and maneuvering. It could also be equipped with a small, well-mounted outboard motor.[1][3]
Cabin headroom is 72 in (183 cm). The fresh water tank has a capacity of 24 U.S. gallons (91 L; 20 imp gal).[1][3]
The design has a hull speed of 6.49 kn (12.02 km/h).[3]
See also
Related development
- C&C 30
- Lancer 30 Mark II
References
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 McArthur, Bruce (2020). "Lancer 29-3 sailboat". sailboatdata.com. https://sailboatdata.com/sailboat/lancer-29-3.
- ↑ McArthur, Bruce (2020). "C&C Design 1961 - 2017". sailboatdata.com. https://sailboatdata.com/designer/cc-design.
- ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 Sea Time Tech, LLC (2022). "Lancer 29-3". sailboat.guide. https://sailboat.guide/lancer/29-3.
- ↑ McArthur, Bruce (2020). "C&C 30-1 (1-506)". sailboatdata.com. https://sailboatdata.com/sailboat/cc-30-1-1-506.
- ↑ McArthur, Bruce (2020). "C&C 30-2". sailboatdata.com. https://sailboatdata.com/sailboat/cc-30-2.
- ↑ McArthur, Bruce (2021). "Lancer Yacht Corp. (USA) 1974 - 1986". sailboatdata.com. https://sailboatdata.com/builder/lancer-yacht-corp-usa.
 |  |
