Engineering:Lancer 30 Mark V
| Development | |
|---|---|
| Designer | C&C Design |
| Location | United States |
| Year | 1980 |
| Builder(s) | Lancer Yachts |
| Role | Cruiser |
| Boat | |
| Boat weight | 8,200 lb (3,719 kg) |
| Draft | 5.20 ft (1.58 m) |
| Hull | |
| Type | monohull |
| Construction | fiberglass |
| LOA | 29.50 ft (8.99 m) |
| LWL | 24.00 ft (7.32 m) |
| Beam | 10.00 ft (3.05 m) |
| Engine type | inboard motor |
| Hull appendages | |
| Keel/board type | fin keel |
| Ballast | 3,000 lb (1,361 kg) |
| Rudder(s) | internally-mounted spade-type rudder |
| Rig | |
| Rig type | Bermuda rig |
| I (foretriangle height) | 34.00 ft (10.36 m) |
| J (foretriangle base) | 10.80 ft (3.29 m) |
| P (mainsail luff) | 35.50 ft (10.82 m) |
| E (mainsail foot) | 13.00 ft (3.96 m) |
| Sails | |
| Sailplan | fractional rigged sloop |
| Mainsail area | 230.75 sq ft (21.437 m2) |
| Jib/genoa area | 183.60 sq ft (17.057 m2) |
| Total sail area | 414.35 sq ft (38.494 m2) |
The Lancer 30 Mark V, also called the Lancer 30 -5, is an American sailboat that was designed by C&C Design as a cruiser and first built in 1980.[1][2][3]
The Lancer 30 Mark V is a development of the Lancer 30 Mark IV, which traces its origins to the C&C 30 molds.[1][3]
Production
The design was built by Lancer Yachts in the United States , between 1980 and 1985, but it is now out of production.[1][3][4]
Design
The Lancer 30 Mark V is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a raked stem; a raised counter, reverse transom; an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces 8,200 lb (3,719 kg) and carries 3,000 lb (1,361 kg) of ballast.[1][3]
The boat has a draft of 5.20 ft (1.58 m) with the standard keel.[1][3]
The boat is fitted with an inboard engine for docking and maneuvering. The fuel tank holds 24 U.S. gallons (91 L; 20 imp gal) and the fresh water tank also has a capacity of 24 U.S. gallons (91 L; 20 imp gal).[1][3]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin with a drop leaf table and an aft cabin with a double berth on the port side. The galley is located on the starboard side amidships. The galley is an open "L"-shape and is equipped with a two-burner stove and a double sink. The head is located on the starboard side at the companionway steps.[1][3]
The design has a hull speed of 6.57 kn (12.17 km/h).[3]
See also
References
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 McArthur, Bruce (2020). "Lancer 30-5 sailboat". sailboatdata.com. https://sailboatdata.com/sailboat/lancer-30-5.
- ↑ McArthur, Bruce (2020). "C&C Design 1961 - 2017". sailboatdata.com. https://sailboatdata.com/designer/cc-design.
- ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Sea Time Tech, LLC (2022). "Lancer 30-5". sailboat.guide. https://sailboat.guide/lancer/30-5.
- ↑ McArthur, Bruce (2021). "Lancer Yacht Corp. (USA) 1974 - 1986". sailboatdata.com. https://sailboatdata.com/builder/lancer-yacht-corp-usa.
External links
 |  |
