Engineering:Letov ST-4 Aztek

From HandWiki
Short description: Czech ultralight aircraft
ST-4 Aztek
Letov ST-4MT Aztek AN1547258.jpg
Role Microlight aircraft
National origin Czech Republic
Manufacturer Letov Kbely
Status Production completed
Number built 15 (1998)

The Letov ST-4 Aztek (English: Aztec) is a Czech microlight aircraft that was designed and produced by Letov Kbely of Prague - Letňany, in the 1990s. When it was available, the aircraft was supplied as a complete ready-to-fly aircraft, or as a kit for amateur construction.[1]

In January 2014, the ST-4 was no longer listed as a product of the company.[2]

Design and development

The aircraft was designed to comply with the Fédération Aéronautique Internationale microlight category, including the category's maximum gross weight of 450 kg (992 lb). The ST-4 Aztek features a strut-braced high-wing, a two-seats-in-side-by-side configuration enclosed cockpit, fixed tricycle landing gear with wheel pants, a small tailskid and a single engine in tractor configuration.[1]

The aircraft is made from aluminum tubing with fairings made from fibreglass and its flying surfaces are covered in Dacron sailcloth. Its 10.40 m (34.1 ft) span wing mounts flaps and has a wing area of 15.21 m2 (163.7 sq ft). The wings are supported by V-struts with jury struts and the empennage is cable-braced. The acceptable power range is 45 to 50 hp (34 to 37 kW) and the standard engine used is the 50 hp (37 kW) Rotax 503 two-stroke powerplant. The engine is mounted high above the cockpit on the front end of the aluminum tube that acts as the tailboom.[1]

The ST-4 Aztek has a typical empty weight of 220 kg (490 lb) and a gross weight of 450 kg (990 lb), giving a useful load of 230 kg (510 lb). With full fuel of 57 litres (13 imp gal; 15 US gal) the payload for pilot, passenger and baggage is 189 kg (417 lb).[1]

The manufacturer estimated the construction time from the supplied kit as 80 hours.[1]

Operational history

By 1998 the company reported that 26 kits had been sold, and that 15 aircraft were completed and flying.[1]

Specifications (ST-4 Aztek)

Letov ST-4 Aztek

Data from AeroCrafter[1]

General characteristics

  • Crew: one
  • Capacity: one passenger
  • Length: 5.91 m (19.40 ft)
  • Wingspan: 10.40 m (34 ft 1 in)
  • Wing area: 15.21 m2 (163.7 sq ft)
  • Empty weight: 220 kg (484 lb)
  • Gross weight: 450 kg (992 lb)
  • Fuel capacity: 15 U.S. gallons (57 L; 12 imp gal)
  • Powerplant: 1 × Rotax 503 twin cylinder, air-cooled, two stroke aircraft engine, 37 kW (50 hp)
  • Propellers: 4-bladed composite

Performance

  • Maximum speed: 132 km/h (82 mph, 71 kn)
  • Cruise speed: 97 km/h (60 mph, 52 kn)
  • Stall speed: 50 km/h (31 mph, 27 kn) flaps down
  • Range: 341 km (212 mi, 184 nmi)
  • Service ceiling: 2,700 m (9,000 ft)
  • Rate of climb: 3.8 m/s (750 ft/min)
  • Wing loading: 29.5 kg/m2 (6.05 lb/sq ft)

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 195. BAI Communications, 15 July 1998. ISBN:0-9636409-4-1
  2. Letov Kbely (n.d.). "Products". Archived from the original on 11 January 2014. https://web.archive.org/web/20140111205416/http://www.llv.cz/en/products.html. Retrieved 11 January 2014. 

External links