Engineering:SFCA Lignel 46 Coach

From HandWiki
Short description: 1940s French light aircraft
Lignel 46 Coach
Lignel 46.png
Role Four seat touring aircraft
National origin France
Manufacturer Société Française de Construction Aéronautique (SFCA)
Designer Jean Lignel
First flight 13 August 1947
Number built 2

The SFCA Lignel 46 Coach was a French four seat touring aircraft built soon after World War II. It was SFCA's last design, with two prototypes built, flown and raced but engine supply problems prevented production.

Design and development

The Lignel 46 was the last aircraft produced by Société Française de Construction Aéronautique (SFCA). It was a cantilever low wing monoplane, seating four in two side-by-side rows under a multipart glazed canopy.[1] The two main transparencies opened away from each other on vertical, forward hinges for cabin access.[2] There was a 140 kW (190 hp) Mathis G8R[1] or Mathis G8 20[3] inverted V-8 engine, driving an automatic variable pitch propeller[3] in the nose; behind the cabin the fuselage tapered linearly from the full cabin depth. The Lignel 46 was a wooden aircraft and its monocoque fuselage was built using a composite shell composed of perforated cork sheets between inner and outer shaped plywood layers, a method patented by Jean Broudeau and one that SFCA had explored before World War II.[1][4]

The wings of the Lignel 46 were broadly similar to those of the SFCA Lignel 20. The central and outer panels were distinguished by the lack of dihedral on the former; both had straight, unswept leading edges but the trailing edge of the outer panels was curved, producing a roughly elliptical plan.[1][2] Like the Lignel 20 the 46 had somewhat inset ailerons and split flaps. The Lignel 46 also had unusual, very small fixed leading edge slots at the wing tips.[3] Apart from its variable incidence tailplane,[3] mounted at mid-height on the fuselage, the empennage was conventional, with a rounded fin and rudder. It had a fixed, tailwheel undercarriage with both landing legs and wheels in aircraft fairings.[1]

The SFCA Lignel 46 first flew on 13 August 1947. Two were completed.[1] One of them was on display at the 18th Paris Aeronautical Salon which opened on 29 May 1949, by which time it had done significant flying.[3] Mathis went out of business in 1950 and SFCA decided not to re-engine the Type 46, though the two prototypes remained active until at least 1951.

Operational history

In its short operational life the Lignal 46 took part in several major competitions. Its best result by far was in 1948, when Jean Lignel took it to first place from a field of over fifty aircraft contesting the Italian Rally.[1] In the summer of 1949 one flew in the Grand Prix de Meaux, though without distinction.[5] The following year the second prototype F-BCFS[1] participated in the South Coast race in England , flown by its designer,[6] finishing well down the field[7] despite recording a speed of 262 km/h (163 mph). In 1951 Louis Clément flew the first prototype F-BCZJ[1][8] in the same race, finishing in mid-field.[9]

Specifications

Data from Les Avions Français de 1944 à 1964 (1990)[1]

General characteristics

  • Crew: One
  • Capacity: Three passengers
  • Length: 8.00 m (26 ft 3 in)
  • Wingspan: 10.30 m (33 ft 10 in)
  • Height: 2.60 m (8 ft 6 in)
  • Wing area: 15 m2 (160 sq ft)
  • Empty weight: 820 kg (1,808 lb)
  • Gross weight: 1,335 kg (2,943 lb)
  • Powerplant: 1 × Mathis G8R inverted V-8, 140 kW (190 hp)
  • Propellers: 2-bladed Ratier, automatic variable pitch[3]

Performance

  • Maximum speed: 270 km/h (170 mph, 150 kn)
  • Range: 960 km (600 mi, 520 nmi)
  • Service ceiling: 7,000 m (23,000 ft)

References