Engineering:Swiftcraft Swift 18
 | This article needs additional citations for verification. (January 2022) (Learn how and when to remove this template message) |
 | This article may need to be rewritten to comply with Wikipedia's quality standards. (January 2022) |
The Swift 18 is an 18-foot trailer sailer yacht which was designed by Colin Sylvester and was in production in the UK between 1982 and 1990. Some 200–300 boats were made, most of which remain in the UK. The Swift 18 has four full-length berths, a sink, a cooker and room for a porta loo. With sitting headroom it is a comfortable weekend cruiser for a small family.[citation needed]
Specifications
| LOA Length | 18 ft 0 in (5.49 m) | |
|---|---|---|
| Length waterline | 16 ft 4 in (5 m) | |
| Beam Width | 7 ft 11 in (2.41 m) | |
| Draft Keel down | 3 ft 6 in (1.07 m) | |
| Draft Keel up | 0 ft 9 in (0.22 m) | |
| Displacement | 1520 lb (690 kg) | |
| Ballast | 375 lb (170 kg) | |
| Rigging | Fractional sloop | |
| Sails | Main | 94 ft² (8.7 m²) |
| Working Jib | 60 ft² (5.6 m²) | |
| Genoa | 105 ft² (9.8 m²) | |
| Storm Jib | 25 ft² (2.3 m²) | |
| Total sail area | 199 ft² (18.5 m²) | |
| Spinnaker | 199 ft² (18.5 m²) |
I = 21 ft 6 in (6.55 m)
J = 7 ft 8 in (2.34 m)
P = 23 ft 9 in (7.25 m)
E = 7 ft 1 in (2.12 m)
History
The Swift 18 was unveiled at the 1981 Southampton Boat show. It was originally intended to be made from aluminium but went into production in GRP. The boat was designed to comply with the French micro cupper rules with a maximum sail area of 199 ft2.
However it is not an all out racing boat and is rather a comfortable trailer sailor, capable of coastal cruising for small families. The boat is virtually unsinkable with foam buoyancy built in. It was met with enthusiastic reviews from the press and went on to sell some 200-300 boats.
The original manufacturer, JCA, built about 220 boats from 1982 to 1985. The company changed name to Swiftcraft and relocated to Shamrock Quay in Southampton during this period.
In 1985 the business was sold and ended up in the hands of Honnor Marine at Totnes Devon. They built a modified boat, marketed as the 300 series. These featured a number of modifications from the original boats, reputedly for cost reduction reasons. Notably these changes include different toerails and non-tapered masts. Honnor Marine built about 35 to 40 boats.
Then around 1988 Marlin International bought the rights, moulds and materials from Honnor Marine. Some of the cost reductions that Honnor Marine had made were reversed and the new boats were marketed as the 400 series, with manufacturing returning to Southampton. Only about 10 of the 400 series boats were built before production ceased in around 1990.
Future production
The moulds for the Swift 18 have recently been acquired by Boats4fun, a family run Boatbuilders in East Sussex, the moulds are currently being re-furbished ready for building the first boat for RCD certification.
The "new" Swift 18 will be similar in layout to those previously built by Swiftcraft and Honnor Marine but the boat will be built with cruising in mind rather than its original target audience of Micro Cup racers.
Where possible all materials and components will be sourced from UK manufacturers.
Boats4fun subsequently announced that due to a change in premises, offers were being invited for the Swift 18 moulds
References
- Magazine, Yacht and Boat owner, August 1982
- Magazine, Boats Power & Sail, April 1982
- Newspaper, Sunday Express, July 22, 1984
External links
 |  |
