Engineering:Tanzer 10

From HandWiki
Short description: Sailboat class

Tanzer 10
Development
DesignerDick Carter
LocationCanada
Year1980
Builder(s)Tanzer Industries
Boat
CrewTwo
Draft6.67 ft (2.03 m) swing keel down
Hull
TypeMasthead sloop
ConstructionFibreglass
LOA32.67 ft (9.96 m)
LWL27.50 ft (8.38 m)
Beam11.86 ft (3.61 m)
Hull appendages
Keel/board typefixed conventional fin keel or swing keel

The Tanzer 10 is a Canadian sailboat, that was designed by Dick Carter and first built in 1980.[1][2][3]

The design was later developed into the Tanzer 10.5.[1][3]

Production

The boat was built by Tanzer Industries Limited in Dorion, Quebec. The company entered bankruptcy in 1986 and production had ended by then.[1][3][4]

Design

The Tanzer 10 is a small recreational keelboat, built predominantly of fibreglass, with wood trim. It has a masthead sloop rig, a transom-hung rudder, wheel steering and a fixed fin keel or optionally a swing keel. The boat displaces 13,000 lb (5,897 kg) and carries 5,000 lb (2,268 kg) of ballast.[1][3]

The boat is powered by a Japanese-made Yanmar diesel engine. It has a pilothouse and inside steering.[1][3]

The fixed keel version has a draft of 5.92 ft (1.80 m), while the swing keel version has a draft of 6.67 ft (2.03 m) with the keel down and 2.00 ft (0.61 m) with the keel retracted.[1][3]

The design has a hull speed of 7.03 kn (13.02 km/h).[3]

See also

Similar sailboats

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 Browning, Randy (2016). "Tanzer 10 sailboat specifications and details". sailboatdata.com. https://sailboatdata.com/sailboat/tanzer-10. Retrieved 10 July 2016. 
  2. McArthur, Bruce (2022). "Dick Carter". sailboatdata.com. https://sailboatdata.com/designer/carter-dick. 
  3. 3.0 3.1 3.2 3.3 3.4 3.5 3.6 Sea Time Tech, LLC (2022). "Tanzer 10". sailboat.guide. https://sailboat.guide/tanzer/10. 
  4. McArthur, Bruce (2022). "Tanzer Industries Ltd. 1966 - 1986". sailboatdata.com. https://sailboatdata.com/builder/tanzer-industries-ltd.