Engineering:Universal charger

From HandWiki
Mobile phone charger plugs

Universal charger or common charger refers to various projects to standardize the connectors of power supplies, particularly for battery-powered devices.

Since the publication of the USB Power Delivery standard in 2012, and the USB-C connector in 2014, USB-C has become a widespread standard for charging mobile phones.

Advantages and disadvantages

A situation where a variety of connectors proliferate has several disadvantages. It is inconvenient and costly for users, and causes unnecessary electronic waste when users change devices, due to the disposal of chargers still in working order.[1]

Legislation for mandatory charger standards has been criticized, particularly by Apple, who argued in 2019 that a single standard would "freeze innovation rather than encourage it." Apple also noted that if a universal standard was not an existing standard, adoption of a new standard would lead to increased e-waste.[2] Apple uses their proprietary Lightning connector for many devices, but is in the process of transitioning to USB-C.

In Brazil, manufacturers are required always to include chargers with new phones.[3][4]

Examples

European Union

In 2009, the European Union proposed the common external power supply, a voluntary specification from 2009 to 2014, which used the micro USB connector.

In 2022, the EU passed Radio Equipment Directive 2022/2380, a law which requires all new smartphones to use USB-C charging by the end of 2024, and all laptops by spring 2026.[5]

South Korea

In March 2001, the South Korea Telecommunications Technology Association (TTA) released a "Standard on I/O Connection Interface of Digital Cellular Phone".[6] This standard describes the electromechanical interface specifications for cellular phone charging, wired data communication, analog audio, etc. and was released together with related test and certification specifications.[7][8] The main feature of the standard is the specification of a 24-pin connector/socket for mobile phones to handle connections for power input (battery charging) and output, data communication (USB and other digital signals), analog audio inputs and outputs (for hands-free microphone, earphone) and other signals. The 2007 revision of the standard[9] specified a smaller 20-pin connector to succeed the 24-pin connector and added analog (composite) video output support, among other changes. Chargers with the new 20-pin connectors started appearing in 2008 and phone manufacturers were urged to include 24-to-20-pin adapters with new phones sold in Korea to enable the charging of new phones with the older 24-pin chargers.[10]

China

In December 2006, the Chinese Ministry of Industry and Information Technology (MII) released a new China Communications Standards Association (CCSA) standard, "Technical Requirements and Test Method of Charger and Interface for Mobile Telecommunication Terminal Equipment".[11] This standard describes the electromechanical requirements for a common mobile device battery charger equipped with a USB type-A socket providing power at 5 V DC. All new mobile phones requesting network access approval in China from June 2007 are required to support charging from the new common chargers. The original 2006 regulation is flexible regarding the interface on the mobile phone itself, allowing for the use of adapter cables if the mobile device is not equipped with a standard USB connector.[12] Among other things, the 2009 update adds references to USB On-The-Go (OTG) support and the use of USB micro-B, micro-AB, mini-B; and Mini-10-pin and cylindrical ("barrel") type connectors on the terminal (phone) for charging.[13]

GSMA universal charging solution (UCS) and OMTP common charging solution (CCS)

OMTP's common charging solution (CCS) components

In February 2009, the GSM Association (GSMA), together with six mobile phone manufacturers and technology providers, and eleven mobile service providers, announced their commitment to implementing a cross-industry standard for a common/universal charging solution for new mobile phones and chargers. The aim of the GSMA initiative was "...to ensure that the mobile industry adopts a common format for mobile phone charger connections and energy-efficient charger...". Universal charging solution (UCS) chargers were required to use micro-USB as the common universal charging interface and have a four-star or higher efficiency rating (standby energy use ≤ 0.15 W).[14]

The Open Mobile Terminal Platform industry forum (OMTP) specified the requirements of the GSMA's Universal Charging Solution and published these requirements under the title "Common Charging and Local Data Connectivity" in 2009. This document specified the three components of a common charging solution (CCS): a charging and local data connector (CLD) on the "terminal" (e.g., a mobile phone) consisting of a micro USB-B (2.0) or micro USB-AB (2.0) receptacle; a common power supply (CPS) with a USB type-A receptacle; and a detachable USB type-A to micro USB-B (2.0) cable to connect the power supply with the mobile phone.[15] As of early 2011, an additional 10 service providers and one additional mobile phone manufacturer had joined the agreement.[16]

In April 2009, the industry trade group The Wireless Association (CTIA) announced its support of the GSMA's Universal Charging Solution.[17]

ITU Universal power adapter and charger solution

The International Telecommunication Union (ITU, the UN specialized agency in the field of telecommunications, information and communication technologies) announced in October 2009 that it had also embraced the universal charging solution standard—based on input from the GSMA—as its "energy-efficient one-charger-fits-all new mobile phone solution."[18] The ITU published Recommendation ITU-T L.1000, specifying a charger similar in most respects to that of the GSMA/OMTP proposal and of the Chinese charger and the EU's common EPS. The ITU specifies that the OMTP's more aggressive "preferred" no load consumption requirement be mandatory after a three-year "transition period" but is more flexible in allowing the use of captive cables and USB micro-B adapters in its "target solution" – similar to the European common EPS standard. The ITU recommendation was expanded and updated in June 2011.[19]

USB Power Delivery and Type-C specification

In 2012, the USB Power Delivery (PD) specification was released. Power Delivery provides the ability for 5 V devices to draw more than 7.5 W of power (the limit specified by USB Battery Charging) from USB PD-aware ports when using PD-aware USB cables. The specification also allows PD ports to provide even greater power at higher voltages over PD-aware cables; up to 36 W at 12 V and 60 W at 20 V (for micro-USB connectors) and up to 60 W at 12 V and 100 W at 20 V (for type-A/B connectors).[20]

In August 2014, the USB 3.0 Promoter Group announced the completion of the USB Type-C connector and cable specification. Type-C cables and connectors are reversible and are electrically backward compatible, but not physically backward compatible, with previous USB plugs and receptacles. New-to-existing cables and adapters have been defined. Some USB Type-C cables and connectors can support "USB performance at SuperSpeed USB 10 Gbps (USB 3.1) and USB Power Delivery up to 100W"[21][22][23] although USB Type-C cables are only required to support USB 2.0 (non-SuperSpeed) data rates and 3 A (60 W at 20 V) of current.[24] Such minimum-specification USB Type-C cables are sometimes referred to as "charge" cables because, for most mobile device battery charging applications, 60 W is more than sufficient and a higher data transfer speed is less important than minimizing cable cost and maximizing cable length.

IEC Technical Specification 62700: DC Power supply for notebook computer

Main page: IEC 62700

IEC 62700 is a specification published in 2014 with the aim of creating a universal laptop charger.[25][26]

IEEE P1823, universal power adapter for mobile devices (UPAMD)

Main page: Universal Power Adapter for Mobile Devices

IEEE P1823 was a proposed global standard for a universal power adapter for mobile devices (UPAMD) that require between 10 W and 240 W. E.g., Laptops, larger tablets and other mobile devices that can require much more power than the (non-Power Delivery) USB battery charging specification limit of 7.5 W at 5 V.[27]

The specification was published in 2015,[28] but was not widely adopted. In 2019 the chair of the IEEE 1823 working group wrote, "Currently the IT market which 1823 standard was originally intended had been swayed by USB SIG to use type C connector as alternatives."[29]

See also

References

  1. ↑ "Harmonisation of a charging capability of common charger for mobile phones – frequently asked questions" (Press release). European Commission. 29 June 2009. Retrieved 26 August 2010.
  2. ↑ Abdul, Geneva (17 January 2020). "A Common Charger for All Phones? The E.U. Is on the Case". The New York Times. https://www.nytimes.com/2020/01/17/business/european-union-phone-charger.html. 
  3. ↑ "Samsung Faces Legal Action For Not Including Chargers With Phones". AH [Android Headlines]. https://www.androidheadlines.com/2022/05/samsung-legal-action-lawsuit-not-including-chargers-brazil.html. 
  4. ↑ "No, Apple, you may not sell iPhones without chargers". The Register. https://www.theregister.com/2022/09/06/brazil_bans_sale_of_iphones/. "Brazilian officials say Apple's claims of removing the chargers to reduce its environmental footprint are meritless, ... Apple is, in their eyes, shipping devices that are incomplete" 
  5. ↑ "Long-awaited common charger for mobile devices will be a reality in 2024" (in en). 10 April 2022. https://www.europarl.europa.eu/news/en/press-room/20220930IPR41928/long-awaited-common-charger-for-mobile-devices-will-be-a-reality-in-2024. 
  6. ↑ "Standard on I/O Connection Interface of Digital Cellular Phone" TTAS.KO-06.0028 released in March 2001. Later updated in 2002 (/R2), and in 2007 (/R4)
  7. ↑ Related test and certification standards published (TTAS.KO-06.0029 and TTAS.KO-06.0030).
  8. ↑ Standard on Integrated I/O Connection Interface for Mobile Phone, Korean Telecommunications Technology Association (TTA), 8 November 2001 
  9. ↑ (2007 revision = TTAS.KO-06.0028/R3)
  10. ↑ TTA certifies first 20-pin battery charger for mobiles, Telecompaper.com, 25 July 2008 
  11. ↑ "Technical Requirements and Test Method of Charger and Interface for Mobile Telecommunication Terminal Equipment" (CCSA YD/T 1591–2006, later updated to YD/T 1591–2009)
  12. ↑ "How to conform to China's new mobile phone interface standards". EETimes.com. 22 October 2007. http://www.eetimes.com/design/communications-design/4016269/How-to-conform-to-China-s-new-mobile-phone-interface-standards?pageNumber=0. 
  13. ↑ "YD 1591–2009 移动通信终端电源适配器及充电/数据接口技术要求和测试方法 ((introduction to) Mobile Communication Terminal Adapter and Charging / Data interface Technical Requirements and Test Methods)". China Communications Standards Association (CCSA.org.cn). 4 August 2010. http://www.ccsa.org.cn/article_new/show_article.php?categories_id=ccc49e22-587d-8397-4ff9-460c5ed9bf46&article_id=bzjs_2842bccf-7e49-0a74-8a92-4c58d44ef1d4. 
  14. ↑ "MOBILE INDUSTRY UNITES TO DRIVE UNIVERSAL CHARGING SOLUTION FOR MOBILE PHONES". http://www.gsma.com/newsroom/press-release/mobile-industry-unites-to-drive-universal-charging-solution-for-mobile-phones/. 
  15. ↑ OMTP: common charging and local data connectivity V1.0, 11 February 2009  (Final revision V1.1 published in 2010)
  16. ↑ "Partners". 2011. http://gsmworld.com/our-work/mobile_planet/green_power_for_mobile/partners.htm. 
  17. ↑ "Press Release: CTIA–The Wireless Association® Announces One Universal Charger Solution to Celebrate Earth Day". ctia.org. 22 April 2009. http://www.ctia.org/media/press/body.cfm/prid/1817. 
  18. ↑ "Press Release: Universal phone charger standard approved — One-size-fits-all solution will dramatically cut waste and GHG emissions". Itu.int. 22 October 2009. http://www.itu.int/newsroom/press_releases/2009/49.html. 
  19. ↑ "Universal power adapter and charger solution for mobile terminals and other hand-held ICT devices". International Telecommunication Union. 13 June 2011. http://www.itu.int/ITU-T/recommendations/rec.aspx?rec=11348. 
  20. ↑ "USB Power Delivery". usb.org. 2012. http://www.usb.org/developers/powerdelivery/. 
  21. ↑ "USB 3.0 Promoter Group Announces USB Type-C Connector Ready for Production". usb.org. 12 August 2014. http://www.usb.org/press/USB_Type-C_Specification_Announcement_Final.pdf. 
  22. ↑ "New USB Type-C connector is smaller, reversible, supports USB 3.1". arstechnica.com. 4 December 2013. https://arstechnica.com/gadgets/2013/12/new-usb-type-c-connector-is-smaller-reversible-supports-usb-3-1/. 
  23. ↑ "Next Generation USB Connection Definition Underway". usb.org. 3 December 2013. http://www.usb.org/press/USB-IF_Press_Releases/Type-C_PR_20131203_Final.pdf. 
  24. ↑ "The New USB Type-C Connector: A Practical Guide To The Next Generation Of Data And Power Ports". 14 April 2015. http://www.androidpolice.com/2015/04/14/the-new-usb-type-c-connector-a-practical-guide-to-the-next-generation-of-data-and-power-ports/. 
  25. ↑ "Major milestone: single charger for notebook computers will significantly reduce e-waste". IEC. http://www.iec.ch/newslog/2013/nr2713.htm. 
  26. ↑ "IEC presses for single charger specification for notebook computers". EDN Europe. 18 December 2013. https://arstechnica.com/information-technology/2013/12/one-charger-to-power-nearly-every-laptop-coming-from-standards-group/. 
  27. ↑ "IEEE Project P1823 – Standard for a universal power adapter for mobile devices". ieee.org. http://standards.ieee.org/develop/project/1823.html. 
  28. ↑ IEEE Standard for Universal Power Adapter for Mobile Devices. doi:10.1109/IEEESTD.2015.7106444. ISBN 978-0-7381-9608-4. 
  29. ↑ "Status for Universal Power Adapter for Mobile Devices (2019)". https://thuejk.blogspot.com/2019/08/status-for-universal-power-adapter-for.html. 



Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Universal_charger&oldid=3260413"