Engineering:Voussoir
A voussoir (/vuˈswɑːr/) is a wedge-shaped element, typically a stone, which is used in building an arch or vault.[1]
Although each unit in an arch or vault is a voussoir, two units are of distinct functional importance: the keystone and the springer. The keystone is the centre stone or masonry unit at the apex of an arch. The springer is the lowest voussoir on each side, located where the curve of the arch springs from the vertical support or abutment of the wall or pier.[1]
The keystone is often decorated or enlarged. An enlarged and sometimes slightly dropped keystone is often found in Mannerist arches of the 16th century, beginning with the works of Giulio Romano, who also began the fashion for using voussoirs above rectangular openings, rather than a lintel (Palazzo Stati Maccarani, Rome, circa 1522).
The word is a stonemason's term borrowed in Middle English from French verbs connoting a "turn" (OED). Each wedge-shaped voussoir turns aside the thrust of the mass above, transferring it from stone to stone to the springer's bottom face (impost), which is horizontal and passes the thrust on to the supports. Voussoir arches distribute weight efficiently, and take maximum advantage of the compressive strength of stone, as in an arch bridge.[citation needed] The outer boundary of a voussoir forms an extrados, internal - an intrados.[2]
In Visigothic and Moorish architectural traditions, the voussoirs are often in alternating colours (ablaq), usually red and white. This is also found sometimes in Romanesque architecture.
See also
References
- ↑ 1.0 1.1 Jane Vadnal (August 1997). "Glossary of Medieval Art and Architecture - voussoir". University of Pittsburgh. https://Pitt.edu/~medart/menuglossary/voussoir.htm.
- ↑ "Extrados". Encyclopædia Britannica. 10 (11th ed.). 1911. p. 89.
External links
- Photo repertory of voussoirs — at www.OntarioArchitecture.com
 |  |
