Front end and back end

From HandWiki
Short description: Presentation layer of piece of software

In software engineering, the terms frontend and backend (or sometimes referred to as back end or back-end) refer to the separation of concerns between the presentation layer (frontend), and the data access layer (backend) of a piece of software, or the physical infrastructure or hardware. In the client–server model, the client is usually considered the frontend and the server is usually considered the backend, even when some presentation work is actually done on the server itself.

Introduction

In software architecture, there may be many layers between the hardware and end user. The front is an abstraction, simplifying the underlying component by providing a user-friendly interface, while the back usually handles data storage and business logic.

In telecommunication, the front can be considered a device or service, while the back is the infrastructure that supports provision of service.

A rule of thumb is that the client-side (or "frontend") is any component manipulated by the user. The server-side (or "backend") code usually resides on the server, often far removed physically from the user.

Software definitions

Web development as an example

Another way to understand the difference between the two is to understand the knowledge required of a front-end vs. a back-end software developer. The list below focuses on web development as an example.

Both

Front-end focused

Back-end focused

Note that both positions, despite possibly working on one product, have a very distinct set of skills.

Hardware definitions

In network computing, frontend can refer to any hardware that optimizes or protects network traffic.[4] It is called application front-end hardware because it is placed on the network's outward-facing frontend or boundary. Network traffic passes through the front-end hardware before entering the network.

In processor design, frontend design would be the initial description of the behavior of a circuit in a hardware description language such as Verilog, while backend design would be the process of mapping that behavior to physical transistors on a die.[5]

See also

References

nl:Frontend