Hardware scout

From HandWiki

Hardware scout is a technique that uses otherwise idle processor execution resources to perform prefetching during cache misses. When a thread is stalled by a cache miss, the processor pipeline checkpoints the register file, switches to runahead mode, and continues to issue instructions from the thread that is waiting for memory. The thread of execution in run-ahead mode is known as a scout thread. When the data returns from memory, the processor restores the register file contents from the checkpoint, and switches back to normal execution mode.

The computation during run-ahead mode is discarded by the processor; nevertheless, scouting provides speedup because memory level parallelism (MLP) is increased. The cache lines brought into the cache hierarchy are often used by the processor again when it switches back to normal mode.

Rock processor scout

Sun's Rock processor (later canceled) used a form of hardware scout. However, any computations in run-ahead mode that do not depend on the cache miss may be retired immediately. This allows both prefetching and traditional instruction-level parallelism.

Scouting vs. SMT

Scouting and simultaneous multithreading (SMT) both use hardware threads to fight the memory wall. With scouting, the scout thread runs the instructions from the same instruction stream as the instruction that causes the pipeline stall. In the case of SMT, the SMT thread executes instruction in another context.

Thus, SMT increases the throughput of the processor while scouting increases the performance by lowering the number of cache misses.

See also

References