Provider-independent address space
A provider-independent address space (PI) is a block of IP addresses assigned by a regional Internet registry (RIR) directly to an end-user organization.[1] The user must contract[2] with a local Internet registry (LIR) through an Internet service provider to obtain routing of the address block within the Internet.
Provider-independent addresses offer end-users the opportunity to change service providers without renumbering of their networks and to use multiple access providers in a multi-homed configuration. However, provider-independent blocks may increase the burden on global routers, as the opportunity for efficient route aggregation through Classless Inter-Domain Routing (CIDR) may not exist.
IPv4 assignments
One of the RIRs is RIPE NCC. The RIPE NCC can no longer assign IPv4 Provider Independent (PI) address space as it is now using the last /8 of IPv4 address space that it holds. IPv4 address space from this last /8 is allocated according to section 5.1 of "IPv4 Address Allocation and Assignment Policies for the RIPE NCC Service Region". IPv4 Provider-aggregatable (PA) Address space can only be allocated to RIPE NCC members.[3]
IPv6 assignments
In April 2009 RIPE accepted a policy proposal of January 2006 to assign IPv6 provider-independent IPv6 prefixes. Assignments are taken from the address range 2001:678::/29[4] and have a minimum size of a /48 prefix.[5]
See also
References
- ↑ RIPE FAQs
- ↑ "Contractual Requirements for Provider Independent Resource Holders in the RIPE NCC Service Region". https://www.ripe.net/publications/docs/ripe-637.
- ↑ "Requesting Independent Resources". https://www.ripe.net/manage-ips-and-asns/resource-management/number-resources/independent-resources.
- ↑ Address Space Managed by the RIPE NCC - Special Purpose Ranges
- ↑ May 2013, Publication date: 14. "IPv6 Address Allocation and Assignment Policy". https://www.ripe.net/publications/docs/ripe-589.
 |  |
