View source for Engineering:Boiler

A '''boiler''' is a closed [[Physics:Pressure vessel|vessel]] in which fluid (generally water) is heated. The fluid does not necessarily boil. The heated or vaporized fluid exits the boiler for use in various processes or heating applications,<ref>{{cite book| first=Frederick M.| last=Steingress| title=Low Pressure Boilers |edition=4th |publisher=American Technical Publishers| year=2001| isbn=0-8269-4417-5}}</ref> <ref>{{cite book| first1=Frederick M.| last1=Steingress| first2=Harold J.| last2=Frost| first3=Darryl R.| last3=Walker| title=High Pressure Boilers| edition=3rd |publisher=American Technical Publishers| year=2003| isbn=0-8269-4300-4}}</ref>{{page needed|date=February 2021} al heating]], [[Engineering:Boiler (power generation)|boiler-based power generation]], cooking, and sanitation.

==Heat sources==
In a fossil fuel power plant using a steam cycle for power generation, the primary heat source will be combustion of [[Physics:Pulverized coal-fired boiler|coal]], oil, or natural gas. In some cases byproduct fuel such as the carbon monoxide rich offgasses of a coke battery can be burned to heat a boiler; biofuels such as [[Biology:Bagasse|bagasse]], where economically available, can also be used. In a nuclear power plant, boilers called [[Engineering:Steam generator (nuclear power)|steam generators]] are heated by the heat produced by nuclear fission. Where a large volume of hot gas is available from some process, a heat recovery steam generator  or [[Engineering:Recovery boiler|recovery boiler]] can use the heat to produce steam, with little or no extra fuel consumed; such a configuration is common in a [[Physics:Combined cycle|combined cycle]] power plant where a gas turbine and a steam boiler are used. In all cases the combustion product waste gases are separate from the working fluid of the steam cycle, making these systems examples of [[Engineering:External combustion engine|external combustion engine]]s.

==Materials==
The [[Physics:Pressure vessel|pressure vessel]] of a boiler is usually made of steel (or alloy steel), or historically of [[Chemistry:Wrought iron|wrought iron]]. [[Chemistry:Stainless steel|Stainless steel]], especially of the austenitic types, is not used in wetted parts of boilers due to corrosion and [[Chemistry:Stress corrosion cracking|stress corrosion cracking]].<ref>{{cite book| title=ASME Boiler and Pressure Vessel Code, Section I, PG-5.5| publisher=[[Organization:American Society of Mechanical Engineers|American Society of Mechanical Engineers]]| year=2010}}</ref> However, ferritic stainless steel is often used in superheater sections that will not be exposed to boiling water, and electrically heated stainless steel shell boilers are allowed under the European "Pressure Equipment Directive" for production of steam for sterilizers and disinfectors.<ref>BS EN 14222: "Stainless steel shell boilers" </ref>



[[Chemistry:Cast iron|Cast iron]] may be used for the heating vessel of domestic water heaters. Although such heaters are usually termed "boilers" in some countries, their purpose is usually to produce hot water, not steam, and so they run at low pressure and try to avoid boiling. The brittleness of cast iron makes it impractical for high-pressure steam boilers.

==Energy==

==Boiler efficiency==
There are two methods to measure the boiler efficiency in the [[Organization:ASME|ASME]] performance test code (PTC) for boilers ASME PTC 4<ref>{{cite web| title=ASME Performance Test Codes| url=https://www.asme.org/codes-standards/publications-information/performance-test-codes}}</ref> and for HRSG ASME PTC 4.4 and EN 12952-15<ref>{{cite web| title=EN 12952-15| url=https://www.en-standard.eu/din-en-12952-15-water-tube-boilers-and-auxiliary-installations-part-15-acceptance-tests/}}</ref> for water tube boilers:
# Input-output method (direct method)
# Heat-loss method (indirect method)

===Input-output method (or, direct method)===
Direct method of boiler efficiency test is more usable or more common.

: Boiler efficiency = power out / power in = Q × (Hg − Hf) / (q × GCV) × 100%

where
: Q, rate of steam flow in kg/h
: Hg, [[Physics:Enthalpy|enthalpy]] of saturated steam in kcal/kg
: Hf, enthalpy of feed water in kcal/kg
: q, rate of fuel use in kg/h
: GCV, gross calorific value in kcal/kg (e.g., pet coke 8200{{nbsp}}kcal/kg)

===Heat-loss method (or, indirect method)===
To measure boiler efficiency by indirect method, these parameters are needed:
* Ultimate analysis of fuel (H<sub>2</sub>, S<sub>2</sub>, S, C, moisture constraint, ash constraint)
* Percentage of O<sub>2</sub> or CO<sub>2</sub> at flue gas
* [[Physics:Flue gas|Flue gas]] temperature at outlet
* [[Physics:Ambient temperature|Ambient temperature]] in °C and [[Physics:Humidity|humidity]] of air in kg/kg
* [[Physics:Heat of combustion|GCV]] of fuel in kcal/kg
* Ash percentage in combustible fuel
* GCV of ash in kcal/kg

==Configurations==
{{see also|Engineering:Boiler design}}
Boilers can be classified into the following configurations:
; Pot boiler or Haycock boiler/[[Engineering:Haystack boiler|Haystack boiler]]: A primitive "kettle" where a fire heats a partially filled water container from below. 18th-century Haycock boilers generally produced and stored large volumes of very low-pressure steam, often hardly above that of the atmosphere. These could burn wood or most often, coal. Efficiency was very low.
; [[Engineering:Flued boiler|Flued boiler]]: With one or two large [[Engineering:Flue|flue]]s—an early type or forerunner of [[Engineering:Fire-tube boiler|fire-tube boiler]].
; [[Engineering:Fire-tube boiler|Fire-tube boiler]]: [[Image:Steam Boiler 2 English version.png|thumb|Diagram of a fire-tube boiler]] Here, water partially fills a boiler barrel with a small volume left above to accommodate the steam (''steam space''). This is the type of boiler used in nearly all steam locomotives. The heat source is inside a furnace or ''firebox'' that has to be kept permanently surrounded by the water to maintain the temperature of the ''heating surface'' below the boiling point. The furnace can be situated at one end of a fire-tube which lengthens the path of the hot gases, thus augmenting the heating surface which can be further increased by making the gases reverse direction through a second parallel tube or a bundle of multiple tubes (two-pass or return flue boiler); alternatively, the gases may be taken along the sides and then beneath the boiler through flues (3-pass boiler). In case of a locomotive-type boiler, a boiler barrel extends from the firebox and the hot gases pass through a bundle of fire tubes inside the barrel which greatly increases the heating surface compared to a single tube and further improves [[Physics:Heat transfer|heat transfer]]. Fire-tube boilers usually have a comparatively low rate of steam production, but high steam storage capacity. Fire-tube boilers mostly burn solid fuels, but are readily adaptable to those of the liquid or gas variety. Fire-tube boilers may also be referred to as "scotch-marine" or "marine" type boilers.<ref name="fda_canneries">{{cite web| title=Steam Generation in Canneries| url=https://www.fda.gov/inspections-compliance-enforcement-and-criminal-investigations/inspection-guides/steam-generation-canneries| website=United States Food & Drug Administration| access-date=25 March 2018}}</ref>
;[[Engineering:Water-tube boiler|Water-tube boiler]]: [[Image:Steam Boiler 3 english.png|thumb|Diagram of a water-tube boiler.]] In this type, tubes filled with water are arranged inside a furnace in a number of possible configurations. Often the water tubes connect large drums, the lower ones containing water and the upper ones steam and water; in other cases, such as a mono-tube boiler, water is circulated by a pump through a succession of coils. This type generally gives high steam production rates, but less storage capacity than fire-tube boilers. Water tube boilers can be designed to exploit any heat source and are generally preferred in high-pressure applications since the high-pressure water/steam is contained within small diameter pipes which can withstand the pressure with a thinner wall. These boilers are commonly constructed in place, roughly square in shape, and can be multiple stories tall.<ref name="fda_canneries" />
;[[Engineering:Flash boiler|Flash boiler]]: A flash boiler is a specialized type of water-tube boiler in which tubes are close together and water is pumped through them. A flash boiler differs from the type of mono-tube steam generator in which the tube is permanently filled with water. In a flash boiler, the tube is kept so hot that the water feed is quickly flashed into steam and [[Physics:Superheating|superheated]]. Flash boilers had some use in automobiles in the 19th century and this use continued into the early 20th century.
;Fire-tube boiler with water-tube firebox: Sometimes the two above types have been combined in the following manner: the firebox contains an assembly of water tubes, called [[Engineering:Thermic siphon|thermic siphon]]s. The gases then pass through a conventional firetube boiler. Water-tube fireboxes were installed in many Hungarian locomotives, but have met with little success in other countries.
;Sectional boiler: In a cast iron sectional boiler, sometimes called a "pork chop boiler" the water is contained inside cast iron sections. These sections are assembled on site to create the finished boiler.

==Safety==
{{see also|Astronomy:Boiler explosion}}
To define and secure boilers safely, some professional specialized organizations such as the [[Organization:American Society of Mechanical Engineers|American Society of Mechanical Engineers]] (ASME) develop standards and regulation codes. For instance, the ASME [[Engineering:Boiler and Pressure Vessel Code|Boiler and Pressure Vessel Code]] is a standard providing a wide range of rules and directives to ensure compliance of the boilers and other pressure vessels with safety, security and design standards.<ref>{{cite web| url=http://www.tuv.com/en/corporate/business_customers/plants_machinery_1/pressure_equipment_2/asme_1/asme.html| title=Boiler and Pressure Vessel Inspection According to ASME|archive-url=http://web.archive.org/web/20170114072952/http://www.tuv.com/en/corporate/business_customers/plants_machinery_1/pressure_equipment_2/asme_1/asme.html|archive-date=2017-01-14}}</ref>

Historically, boilers were a source of many serious injuries and property destruction due to poorly understood engineering principles. Thin and brittle metal shells can rupture, while poorly welded or riveted seams could open up, leading to a violent eruption of the pressurized steam.  When water is converted to steam it expands to over 1,000 times its original volume and travels down steam pipes at over {{convert|100|kph|mph}}. Because of this, steam is an efficient method of moving energy and heat around a site from a central boiler house to where it is needed, but without the right boiler feedwater treatment, a steam-raising plant will suffer from scale formation and corrosion. At best, this increases energy costs and can lead to poor quality steam, reduced efficiency, shorter plant life and unreliable operation. At worst, it can lead to catastrophic failure and loss of life. Collapsed or dislodged boiler tubes can also spray scalding-hot steam and smoke out of the air intake and firing chute, injuring the firemen who load the coal into the fire chamber. Extremely large boilers providing hundreds of horsepower to operate factories can potentially demolish entire buildings.<ref>{{cite book| title=The Locomotive| author=Hartford Steam Boiler Inspection and Insurance Company| publisher=Hartford Steam Boiler Inspection and Insurance Co.| year=1911| via=Google Books| url=https://books.google.com/books?id=-LYSAAAAYAAJ&pg=PA1}} An article on a massive Pabst Brewing Company boiler explosion in 1909 that destroyed a building, and blew parts onto the roof of nearby buildings. This document also contains a list of day-by-day boiler accidents and accident summaries by year, and discussions of boiler damage claims.</ref>

A boiler that has a loss of feed water and is permitted to boil dry can be extremely dangerous. If feed water is then sent into the empty boiler, the small cascade of incoming water instantly boils on contact with the superheated metal shell and leads to a violent explosion that cannot be controlled even by safety steam valves. Draining of the boiler can also happen if a leak occurs in the steam supply lines that is larger than the make-up water supply could replace. The ''Hartford Loop'' was invented in 1919 by the Hartford Steam Boiler Inspection and Insurance Company as a method to help prevent this condition from occurring, and thereby reduce their insurance claims.<ref>{{cite web| first=Dan| last=Holohan| url=http://www.massengineers.com/Documents/Hartford%20Loop.htm| title=What you should know about Hartford Loops}}</ref><ref>{{cite web| url=http://inspectapedia.com/heat/Hartford_Loop.php| title=The Hartford Loop on Steam Boilers}}</ref>

==Superheated steam boiler==
[[Image:Superheater.jpg|thumb|upright=1.2|A superheated boiler on a steam locomotive]]
{{main|Engineering:Superheater}}
When water is boiled the result is [[Chemistry:Superheated steam#Saturated steam|saturated steam]], also referred to as "wet steam."  Saturated steam, while mostly consisting of water vapor, carries some unevaporated water in the form of droplets.  Saturated steam is useful for many purposes, such as cooking, heating and sanitation, but is not desirable when steam is expected to convey energy to machinery, such as a ship's [[Engineering:Steam turbine#Marine propulsion|propulsion system]] or the "motion" of a [[Engineering:Steam locomotive|steam locomotive]].  This is because unavoidable temperature and/or pressure loss that occurs as steam travels from the boiler to the machinery will cause some condensation, resulting in liquid water being carried into the machinery.  The water entrained in the steam may damage turbine blades or in the case of a [[Physics:Steam engine|reciprocating steam engine]], may cause serious mechanical damage due to hydrostatic lock.

[[Chemistry:Superheated steam|Superheated steam]] boilers evaporate the water and then further heat the steam in a ''superheater'', causing the discharged steam temperature to be substantially above the boiling temperature at the boiler's operating pressure. As the resulting "dry steam" is much hotter than needed to stay in the vaporous state it will not contain any significant unevaporated water.  Also, higher steam pressure will be possible than with saturated steam, enabling the steam to carry more energy.  Although superheating adds more energy to the steam in the form of heat there is no effect on pressure, which is determined by the rate at which steam is drawn from the boiler and the pressure settings of the [[Engineering:Safety valve|safety valve]]s.<ref>{{cite book| last=Bell| first=A.M.| year=1952| title=Locomotives| volume=1| page=46| publisher=Virtue and Company Ltd| location=London}}</ref>  The fuel consumption required to generate superheated steam is greater than that required to generate an equivalent volume of saturated steam.  However, the overall energy efficiency of the steam plant (the combination of boiler, superheater, piping and machinery) generally will be improved enough to more than offset the increased fuel consumption.

Superheater operation is similar to that of the coils on an air conditioning unit, although for a different purpose. The steam piping is directed through the flue gas path in the boiler furnace, an area in which the temperature is typically between {{convert|1300|and|1600|C|F|0|abbr=off}}. Some superheaters are radiant type, which as the name suggests, they absorb heat by radiation.  Others are convection type, absorbing heat from a fluid. Some are a combination of the two types. Through either method, the extreme heat in the flue gas path will also heat the superheater steam piping and the steam within.

The design of any superheated steam plant presents several engineering challenges due to the high working temperatures and pressures.  One consideration is the introduction of feedwater to the boiler.  The pump used to charge the boiler must be able to overcome the boiler's operating pressure, else water will not flow.  As a superheated boiler is usually operated at high pressure, the corresponding feedwater pressure must be even higher, demanding a more robust pump design.

Another consideration is safety.  High pressure, superheated steam can be extremely dangerous if it unintentionally escapes.  To give the reader some perspective, the steam plants used in many U.S. Navy destroyers built during World War II operated at {{convert|600|psi|kPa bar|lk=on||abbr=on}} pressure and {{convert|850|°F|°C|abbr=off}} superheat.  In the event of a major rupture of the system, an ever-present hazard in a warship during combat, the enormous energy release of escaping superheated steam, expanding to more than 1600 times its confined volume, would be equivalent to a cataclysmic explosion, whose effects would be exacerbated by the steam release occurring in a confined space, such as a ship's [[Engineering:Engine room|engine room]].  Also, small leaks that are not visible at the point of leakage could be lethal if an individual were to step into the escaping steam's path.  Hence designers endeavor to give the steam-handling components of the system as much strength as possible to maintain integrity.  Special methods of coupling steam pipes together are used to prevent leaks, with very high pressure systems employing welded joints to avoid leakage problems with [[Engineering:Screw thread|threaded]] or [[Engineering:Gasket|gasket]]ed connections.

===Supercritical steam generator===
[[Image:Turmkessel02.png|thumb|upright=1.2|Boiler for a power plant]]
{{Main|Engineering:Supercritical steam generator}}
Supercritical steam generators are frequently used for the production of [[Physics:Electric power|electric power]]. They operate at [[Physics:Supercritical fluid|supercritical]] pressure. In contrast to a "subcritical boiler", a supercritical steam generator operates at such a high pressure (over {{convert|3200|psi|MPa|abbr=on|disp=or}}) that the physical turbulence that characterizes boiling ceases to occur; the fluid is neither liquid nor gas but a supercritical fluid. There is no generation of steam bubbles within the water, because the pressure is above the critical pressure point at which steam bubbles can form. As the fluid expands through the turbine stages, its thermodynamic state drops below the critical point as it does work turning the turbine which turns the electrical generator from which power is ultimately extracted. The fluid at that point may be a mix of steam and liquid droplets as it passes into the [[Physics:Condenser (heat transfer)|condenser]]. This results in slightly less fuel use and therefore less [[Chemistry:Greenhouse gas|greenhouse gas]] production. The term "boiler" should not be used for a supercritical pressure steam generator, as no "boiling" occurs in this device.

==Accessories==
[[Image:Jämsänkoski pulp mill boiler.jpg|thumb|A boiler of [[Jämsänkoski]]'s pulp mill with calorisator in 1938]]

===Boiler fittings and accessories===
* [[Engineering:Pressuretrol|Pressuretrol]]s to control the steam pressure in the boiler. Boilers generally have 2 or 3 pressuretrols: a manual-reset pressuretrol, which functions as a safety by setting the upper limit of steam pressure; the operating pressuretrol, which controls when the boiler fires to maintain pressure; and for boilers equipped with a modulating burner, a modulating pressuretrol which controls the amount of fire.
* '''[[Engineering:Relief valve|Safety valve]]:''' It is used to relieve pressure and prevent possible [[Astronomy:Boiler explosion|explosion of a boiler]].
* '''Water level indicators:''' They show the operator the level of fluid in the boiler, also known as a [[Engineering:Sight glass|sight glass]], water gauge or water column.
* '''Bottom [[Chemistry:Boiler blowdown|blowdown]] valves:''' They provide a means for removing solid particulates that condense and lie on the bottom of a boiler. As the name implies, this valve is usually located directly on the bottom of the boiler, and is occasionally opened to use the pressure in the boiler to push these particulates out.
* '''Continuous blowdown valve:''' This allows a small quantity of water to escape continuously. Its purpose is to prevent the water in the boiler becoming saturated with dissolved salts. Saturation would lead to foaming and cause water droplets to be carried over with the steam – a condition known as priming. Blowdown is also often used to monitor the chemistry of the boiler water.
* '''Trycock:''' a type of [[Engineering:Valve|valve]] that is often used to manually check a liquid level in a tank. Most commonly found on a water boiler.
* '''Flash tank:''' High-pressure blowdown enters this vessel where the steam can 'flash' safely and be used in a low-pressure system or be vented to atmosphere while the ambient pressure blowdown flows to drain.
* '''Automatic blowdown/continuous heat recovery system:''' This system allows the boiler to blowdown only when makeup water is flowing to the boiler, thereby transferring the maximum amount of heat possible from the blowdown to the makeup water.  No flash tank is generally needed as the blowdown discharged is close to the temperature of the makeup water.
* '''Hand holes:''' They are steel plates installed in openings in "header" to allow for inspections & installation of tubes and inspection of internal surfaces.
* Steam drum internals, a series of screen, scrubber & cans (cyclone separators).
* '''Low-water cutoff:''' It is a mechanical means (usually a float switch) or an electrode with a safety switch that is used to turn off the burner or shut off fuel to the boiler to prevent it from running once the water goes below a certain point. If a boiler is "dry-fired" (burned without water in it) it can cause rupture or catastrophic failure.
* '''Surface blowdown line:''' It provides a means for removing foam or other lightweight non-condensible substances that tend to float on top of the water inside the boiler.
* '''Circulating [[Engineering:Pump|pump]]:''' It is designed to circulate water back to the boiler after it has expelled some of its heat.
* '''Feedwater [[Engineering:Check valve|check valve]] or clack valve:''' A non-return stop valve in the [[Chemistry:Boiler feedwater|feedwater]] line. This may be fitted to the side of the boiler, just below the water level, or to the top of the boiler.{{sfn|Bell|1952| page=35}}
* <!--(i) Top feed redirects here. (ii) Need to duplicate wikilinks, since reader may not read the 'feedwater check valve' line having been redirected to this section. -->'''Top feed:''' In this design for feedwater injection, the water is fed to the top of the boiler. This can reduce boiler fatigue caused by thermal stress. By spraying the feedwater over a series of trays the water is quickly heated and this can reduce [[Earth:Limescale|limescale]].
* '''Desuperheater tubes or bundles:''' A series of tubes or bundles of tubes in the water drum or the steam drum designed to cool superheated steam, in order to supply auxiliary equipment that does not need, or may be damaged by, dry steam.
* '''Chemical injection line:''' A connection to add chemicals for controlling feedwater [[Chemistry:PH|pH]].

===Steam accessories===
* Main steam stop valve
* [[Engineering:Steam trap|Steam trap]]s
* Main steam stop/check valve: It is used on multiple boiler installations.

===Combustion accessories===
* Dutch oven<ref>{{cite book|last=Shealy|first=E.M.|title=Steam Boilers|location=New York|publisher=McGraw-Hill|date=1912|oclc=1113580523|url=https://www.google.com/books/edition/Steam_Boilers/VFNMAAAAMAAJ|pages=202-203}}</ref>
* Fuel oil system and fuel oil heaters
* Gas system
* Coal system

===Other essential items===
* [[Physics:Pressure measurement|Pressure gauges]]
* [[Physics:Boiler feedwater pump|Feed pumps]]
* [[Engineering:Fusible plug|Fusible plug]]
* Insulation and lagging
* Inspectors test pressure gauge attachment
* Name plate
* Registration plate

== Draught ==
{{main|Physics:Draft (boiler)}}



Types of draught can also be divided into ''induced draught'', where exhaust gases are pulled out of the boiler; ''forced draught'', where fresh air is pushed into the boiler; and ''balanced draught'', where both effects are employed. Natural draught through the use of a chimney is a type of induced draught; mechanical draught can be induced, forced or balanced.

There are two types of mechanical induced draught. The first is through use of a steam jet. The steam jet oriented in the direction of flue gas flow induces flue gases into the stack and allows for a greater flue gas velocity increasing the overall draught in the furnace. This method was common on steam driven locomotives which could not have tall chimneys. The second method is by simply using an induced draught fan (ID fan) which removes flue gases from the furnace and forces the exhaust gas up the stack. Almost all induced draught furnaces operate with a slightly negative pressure.

Mechanical forced draught is provided by means of a fan forcing air into the combustion chamber. Air is often passed through an air heater; which, as the name suggests, heats the air going into the furnace to increase the overall efficiency of the boiler. Dampers are used to control the quantity of air admitted to the furnace. Forced draught furnaces usually have a positive pressure.

Balanced draught is obtained through use of both induced and forced draught. This is more common with larger boilers where the flue gases have to travel a long distance through many boiler passes. The induced draught fan works in conjunction with the forced draught fan allowing the furnace pressure to be maintained slightly below atmospheric.

==See also==
{{div col}}
* {{annotated link|Company:Babcock & Wilcox}}, boiler manufacturer
* {{annotated link|Engineering:Deaerator|Boiler feed water deaerator}}
* {{annotated link|Chemistry:Dealkalization of water}}
* {{annotated link|Engineering:Electric water boiler}} (for drinking water)
* {{annotated link|Engineering:Electrode boiler}}
* {{annotated link|Engineering:Heating plant}}
* {{annotated link|Physics:Heat pump}}
* {{annotated link|Engineering:Hot water reset}}
* {{annotated link|Engineering:Internally rifled boiler tubes}} (also known as Serve tubes)
* {{annotated link|Organization:International Flame Research Foundation}} network of industrial flame experts
* {{annotated link|Engineering:Flued boiler}}
* {{annotated link|Engineering:List of boiler types, by manufacturer|List of boiler types}}
* {{annotated link|Engineering:Natural circulation boiler}}
* {{annotated link|Engineering:Outdoor wood-fired boiler}}
* {{annotated link|Engineering:Tube tool}}
{{div col end}}

== References ==
{{reflist}}
* {{cite web| url=https://firecad.net/engineering-calculations/Boiler/Combustion| title=Boiler Calculations| website=FireCAD Boiler Calculations| access-date=February 11, 2020}}

==Further reading==
{{refbegin}}
* [[Organization:American Society of Mechanical Engineers|American Society of Mechanical Engineers]]: ''ASME Boiler and Pressure Vessel Code, Section I''. Updated every 3 years.
* Association of Water Technologies: Association of Water Technologies (AWT).
* {{cite book| author=The Babcock & Wilcox Co.| orig-year=1902| title=Steam, its generation and use| location=New York-London| edition=republished| publisher=Nabu Press| isbn=978-1147-61244-8| year=2010}}
{{refend}}

{{Boilers}}
{{HVAC}}

[[Category:Boilers| ]]
[[Category:Chemical equipment]]
[[Category:Plumbing]]
[[Category:Heating, ventilation, and air conditioning]]

{{Sourceattribution|Boiler}}