Direction flag
From HandWiki
Revision as of 12:10, 15 June 2021 by imported>John Stpola (correction)
The direction flag is a flag that controls the left-to-right or right-to-left direction of string processing,[1] stored in the FLAGS register on all x86-compatible CPUs.[2] It is bit number 10.
This flag is used to determine the direction ('forward' or 'backward') in which several bytes of data will be copied from one place in the memory, to another. The direction is important mainly when the original data position in memory and the target data position overlap.
- If it is set to 0 (using the clear-direction-flag instruction
CLD) — it means that string is processed beginning from lowest to highest address; such instructions mode is called auto-incrementing mode. Both the source index and destination index (likeMOVS) will increase them; - In case it is set to 1 (using the set-direction-flag instruction
STD) — the string is processed from highest to lowest address. This is called auto-decrementing mode.
| x86-instruction | Meaning | Flag | Notes | |
|---|---|---|---|---|
| Direction
of string processing |
Mode title | |||
CLD
|
clear direction flag | 0 | lowest-to-highest address | auto-incrementing |
STD
|
set direction flag | 1 | highest-to-lowest address | auto-decrementing |
References
 |  |
