Physics:Luminous energy
In photometry, luminous energy is the perceived energy of light. This is sometimes called the quantity of light.[1] Luminous energy is not the same as radiant energy, the corresponding objective physical quantity. This is because the human eye can only see light in the visible spectrum and has different sensitivities to light of different wavelengths within the spectrum. When adapted for bright conditions (photopic vision), the eye is most sensitive to light at a wavelength of 555 nm. Light with a given amount of radiant energy will have more luminous energy if the wavelength is 555 nm than if the wavelength is longer or shorter. Light whose wavelength is well outside the visible spectrum has a luminous energy of zero, regardless of the amount of radiant energy present.
The SI unit of luminous energy is the lumen second, which is unofficially known as the talbot in honor of William Henry Fox Talbot. In other systems of units, luminous energy may be expressed in basic units of energy.
Explanation
Luminous energy [math]\displaystyle{ Q_\mathrm v }[/math] is related to radiant energy [math]\displaystyle{ Q_\mathrm e }[/math] by the expression [math]\displaystyle{ Q_\mathrm v = 683.002\ \mathrm{lm/W} \cdot \int^\infin_0 Q_\mathrm e(\lambda) \overline{y}(\lambda) \, \mathrm d\lambda. }[/math] Here [math]\displaystyle{ \lambda }[/math] is the wavelength of light, and [math]\displaystyle{ \overline{y}(\lambda) }[/math] is the luminosity function, which represents the eye's sensitivity to different wavelengths of light.
Luminous energy is the integrated luminous flux in a given period of time: [math]\displaystyle{ Q_\mathrm{v} = \int_{0}^{T} \mathit{\Phi_\mathrm{v}}(t) \, \mathrm{d}t }[/math]
See also
| Quantity | Unit | Dimension | Notes | |||||
|---|---|---|---|---|---|---|---|---|
| Name | Symbol[nb 1] | Name | Symbol | Symbol[nb 2] | ||||
| Luminous energy | Qv[nb 3] | lumen second | lm⋅s | T⋅J | The lumen second is sometimes called the talbot. | |||
| Luminous flux, luminous power | Φv[nb 3] | lumen (= candela steradians) | lm (= cd⋅sr) | J | Luminous energy per unit time | |||
| Luminous intensity | Iv | candela (= lumen per steradian) | cd (= lm/sr) | J | Luminous flux per unit solid angle | |||
| Luminance | Lv | candela per square metre | cd/m2 | L−2⋅J | Luminous flux per unit solid angle per unit projected source area. The candela per square metre is sometimes called the nit. | |||
| Illuminance | Ev | lux (= lumen per square metre) | lx (= lm/m2) | L−2⋅J | Luminous flux incident on a surface | |||
| Luminous exitance, luminous emittance | Mv | lux | lx | L−2⋅J | Luminous flux emitted from a surface | |||
| Luminous exposure | Hv | lux second | lx⋅s | L−2⋅T⋅J | Time-integrated illuminance | |||
| Luminous energy density | ωv | lumen second per cubic metre | lm⋅s/m3 | L−3⋅T⋅J | ||||
| Luminous efficacy (of radiation) | K | lumen per watt | lm/W | M−1⋅L−2⋅T3⋅J | Ratio of luminous flux to radiant flux | |||
| Luminous efficacy (of a source) | η[nb 3] | lumen per watt | lm/W | M−1⋅L−2⋅T3⋅J | Ratio of luminous flux to power consumption | |||
| Luminous efficiency, luminous coefficient | V | 1 | Luminous efficacy normalized by the maximum possible efficacy | |||||
| See also: SI · Photometry · Radiometry | ||||||||
- ↑ Standards organizations recommend that photometric quantities be denoted with a subscript "v" (for "visual") to avoid confusion with radiometric or photon quantities. For example: USA Standard Letter Symbols for Illuminating Engineering USAS Z7.1-1967, Y10.18-1967
- ↑ The symbols in this column denote dimensions; "L", "T" and "J" are for length, time and luminous intensity respectively, not the symbols for the units litre, tesla and joule.
- ↑ 3.0 3.1 3.2 Alternative symbols sometimes seen: W for luminous energy, P or F for luminous flux, and ρ for luminous efficacy of a source.
References
- ↑ electropedia, International Electrotechnical Vocabulary (IEV) of the International Electrotechnical Commission: entry # 845-21-037
 |  |
