Chemistry:Isoprenol

From HandWiki
Revision as of 07:08, 6 March 2023 by JMinHep (talk | contribs) (over-write)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Isoprenol
Skeletal formula of prenol
Ball-and-stick model of prenol
Names
IUPAC name
3-Methylbut-3-en-1-ol
Other names
3-Methyl-3-buten-1-ol
Identifiers
3D model (JSmol)
ChemSpider
EC Number
  • 212-110-8
Properties[1]
C5H10O
Molar mass 86.132 g/mol
Density 0.853 g/cm3
Boiling point 130 to 132 °C (266 to 270 °F; 403 to 405 K)
1.433
Hazards[2]
GHS pictograms Flam. Liq. 3Eye Irrit. 2
GHS Signal word WARNING
H226, H319
P210, P233, P240, P241, P242, P243, P264, P280, P303+361+353, P305+351+338, P337+313, P370+378, P403+235, P501
Flash point 36 °C (97 °F; 309 K)[note 1]
Related compounds
Related compounds
Prenol
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☑Y verify (what is ☑Y☒N ?)
Infobox references
Tracking categories (test):

Isoprenol, also known as 3-methylbut-3-en-1-ol, is a hemiterpene alcohol. It is produced industrially as an intermediate to 3-methylbut-2-en-1-ol (prenol): global production in 2001 can be estimated as 6–13 thousand tons.[3]

Isoprenol is produced by the reaction between isobutene (2-methylpropene) and formaldehyde.

The reaction of isobutene with formaldehyde to give isoprenol, the first step in the industrial manufacture of prenol.

The thermodynamically preferred isomer with the more substituted double bond cannot be directly formed in this reaction, but isomerization yields the desired product:

The isomerization of isoprenol to prenol, the second step in the industrial manufacture of prenol.

The reaction is catalyzed by any species which can form an allyl complex without excessive hydrogenation of the substrate, for example poisoned palladium catalysts.[4]

Notes

  1. Sigma-Aldrich Co. gives a value for the flash point of isoprenol of 42 °C (108 °F). The difference in the two values does not alter the safety classification of isoprenol as a category 3 flammable liquid under the GHS; but the lower value quoted here (from the New Zealand Environmental Risk Management Authority) would make it a class IC flammable liquid instead of a class II combustible liquid under the U.S. OSHA classification (29 C.F.R § 1910.106), and F3 rather than F2 under the NFPA 704 standard.

References

  1. Template:Aldrich.
  2. HSNO Chemical Classification Information Database, New Zealand Environmental Risk Management Authority, http://www.epa.govt.nz/search-databases/Pages/ccid-details.aspx?SubstanceID=13375, retrieved 2009-08-31 .
  3. 3-Methyl-2-buten-1-ol, SIDS Initial Assessment Report, Geneva: United Nations Environment Programme, May 2005, http://www.inchem.org/documents/sids/sids/556821.pdf . Major produce in a world is BASF(Germany) and Kuraray(Japan).
  4. See, e.g., Kogan, S. B.; Kaliya, M.; Froumin, N. (2006), "Liquid phase isomerization of isoprenol into prenol in hydrogen environment", Appl. Catal. A: Gen. 297 (2): 231–36, doi:10.1016/j.apcata.2005.09.010 .