Earth:Tin Mountain pegmatite
| Tin Mountain pegmatite Stratigraphic range: Late Paleoproterozoic, ~1.7 Ga | |
|---|---|
 Geological map showing the Tin Mountain pegmatite (star) and the associated Harney Peak Granite system (outlined pink). | |
| Type | Geological formation |
| Lithology | |
| Primary | Pegmatite |
| Location | |
| Region | Black Hills of South Dakota |
| Country |  United States |
| Extent | South Dakota |
The Tin Mountain pegmatite is an igneous intrusion located in the southern Black Hills, South Dakota. It is a part of the Harney Peak Granite dome that formed in the Late Paleoproterozoic around 1.7 billion years ago.[1][2][3] The Harney Peak Granite system includes thousands of pegmatites, one of which is the Tin Mountain.[1] The Tin Mountain pegmatite is rich in lithium, but was first mined in search of tin, which gave the mountain its name.[3][4]
Formation History
The geologic age and composition of the Black Hills stretches from Late Archean metagranites to both metavolcanic and metasedimentary rocks from the early Proterozoic, as well as the Proterozoic Harney Peak Granite.[1] The Laramide Orogeny (70-80 Ma) formed the preexisting strata into the elongate dome of the Black Hills without causing major deformation to the rocks.[5] The Tin Mountain pegmatite, an offshoot of the Harney Peak Granite, intrudes into both the Mayo Formation, an early Proterozoic quartz-mica schist, as well as a small amphibolite unit.[2]
Crystallization History
Pegmatites are thought to form from mature granitic magma systems and their extensive crystal-melt fractionation, which causes incompatible elements to accumulate in the residual melt.[1][6] The Tin Mountain pegmatite can be genetically traced to the Harney Peak Granite dome through analyzing trace and rare earth element levels, such as samarium and neodymium, for which the concentrations in both the Harney Peak Granite pegmatite and the Tin Mountain are identical.[1][6]
Trace element concentrations also supply information about the order of crystallization in the Tin Mountain pegmatite zones.[2] Vertical zoning in pegmatites is not uncommon, especially when lithium concentrations are high, and the vertical zoning in the Tin Mountain pegmatite aligns with certain trace elements, thought to mimic the crystallization behavior of the major alkali groups.[7][6]
Structure
The Tin Mountain pegmatite is roughly L-shaped, with the longer leg trending N7’W and the other trending N75’W.[2] It is approximately 200 m long and is 30 m wide at the maximum.[3] It is a vertically differentiated zoned pegmatite, and consists of five main zones: the wall zone, three intermediate zones, and a core.[2][7]
Wall Zone
The wall zone encloses the pegmatite entirely as a shell, and crystallized first out of all the zones.[2] It consists mainly of equigranular quartz, albite, and muscovite, and has a range of thickness from several meters to tens of centimeters.[2]
First Intermediate Zone
The first intermediate zone is located mostly in the upper leg, above the other zones, and consists mainly of quartz, albite, perthite, and some muscovite.[2]
Second Intermediate Zone
The second intermediate zone is located mostly below the first zone, and above the core and the third zone.[2] It consists almost entirely of large perthite crystals, some reaching 4 m in length, with quartz crystals up to a meter across.[2] Albite and muscovite are also present, but in more minor phases.[2]
Third Intermediate Zone
The third intermediate zone is located in the lower parts of the pegmatite, below the core and the other intermediate zones.[2] It consists mainly of quartz, albite, mica, and spodumene.[2]
Core
The core is located in the center of the pegmatite and extends primarily downward into the lower leg.[2] It consists mainly of quartz, spodumene, and micas with some albite, beryl, and amblygonite in minor phases.[2]
References
- ↑ 1.0 1.1 1.2 1.3 1.4 Teng, Fang-Zhen; McDonough, William F.; Rudnick, Roberta L.; Walker, Richard J. (2006-03-30). "Diffusion-driven extreme lithium isotopic fractionation in country rocks of the Tin Mountain pegmatite" (in en). Earth and Planetary Science Letters 243 (3): 701–710. doi:10.1016/j.epsl.2006.01.036. ISSN 0012-821X. Bibcode: 2006E&PSL.243..701T. https://www.sciencedirect.com/science/article/pii/S0012821X06000756.
- ↑ 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 2.13 2.14 2.15 Walker, R. J., Hanson, G., Papike, J. J., O'neil, J., & Laul, J. (1986). Internal evolution of the Tin Mountain pegmatite, Black Hills, South Dakota. American Mineralogist, 71(3-4), 440-459.
- ↑ 3.0 3.1 3.2 Walker, R. J., Hanson, G., Papike, J., & O'neil, J. (1986). Nd, O and Sr isotopic constraints on the origin of Precambrian rocks, southern Black Hills, South Dakota. Geochimica et Cosmochimica Acta, 50(12), 2833-2846.
- ↑ Staatz, M. H., Page, L., Norton, J., & Wilmarth, V. (1963). Exploration for Beryllium at the Helen Beryl, Elkhorn, and Tin Mountain Pegmatites, Custer County, South Dakota (2330-7102).
- ↑ Norton, J. J., & Redden, J. A. (1990). Relations of zoned pegmatites to other pegmatites, granite, and metamorphic rocks in the southern Black Hills, South Dakota. American Mineralogist, 75(5-6), 631-655.
- ↑ 6.0 6.1 6.2 Walker, Richard J. (1984). The origin of the Tin Mountain pegmatite, Black Hills, South Dakota (PhD). State University of New York at Stony Brook.
- ↑ 7.0 7.1 Norton, J. J. (1994). Structure and bulk composition of the Tin Mountain Pegmatite, Black Hills, South Dakota. Economic Geology, 89(5), 1167-1175.
 |  |
