Space mapping

From HandWiki
Revision as of 16:15, 30 June 2023 by John Stpola (talk | contribs) (update)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Design optimization methodology

The space mapping methodology for modeling and design optimization of engineering systems was first discovered by John Bandler in 1993. It uses relevant existing knowledge to speed up model generation and design optimization of a system. The knowledge is updated with new validation information from the system when available.

Concept

The space mapping methodology employs a "quasi-global" formulation that intelligently links companion "coarse" (ideal or low-fidelity) and "fine" (practical or high-fidelity) models of different complexities. In engineering design, space mapping aligns a very fast coarse model with the expensive-to-compute fine model so as to avoid direct expensive optimization of the fine model. The alignment can be done either off-line (model enhancement) or on-the-fly with surrogate updates (e.g., aggressive space mapping).

Methodology

At the core of the process is a pair of models: one very accurate but too expensive to use directly with a conventional optimization routine, and one significantly less expensive and, accordingly, less accurate. The latter (fast model) is usually referred to as the "coarse" model (coarse space). The former (slow model) is usually referred to as the "fine" model. A validation space ("reality") represents the fine model, for example, a high-fidelity physics model. The optimization space, where conventional optimization is carried out, incorporates the coarse model (or surrogate model), for example, the low-fidelity physics or "knowledge" model. In a space-mapping design optimization phase, there is a prediction or "execution" step, where the results of an optimized "mapped coarse model" (updated surrogate) are assigned to the fine model for validation. After the validation process, if the design specifications are not satisfied, relevant data is transferred to the optimization space ("feedback"), where the mapping-augmented coarse model or surrogate is updated (enhanced, realigned with the fine model) through an iterative optimization process termed "parameter extraction". The mapping formulation itself incorporates "intuition", part of the engineer's so-called "feel" for a problem.[1] In particular, the Aggressive Space Mapping (ASM) process displays key characteristics of cognition (an expert's approach to a problem), and is often illustrated in simple cognitive terms.

Development

Following John Bandler's concept in 1993,[1][2] algorithms have utilized Broyden updates (aggressive space mapping),[3] trust regions,[4] and artificial neural networks.[5] Developments include implicit space mapping,[6] in which we allow preassigned parameters not used in the optimization process to change in the coarse model, and output space mapping, where a transformation is applied to the response of the model. A 2004 paper reviews the state of the art after the first ten years of development and implementation.[7] Tuning space mapping[8] utilizes a so-called tuning model—constructed invasively from the fine model—as well as a calibration process that translates the adjustment of the optimized tuning model parameters into relevant updates of the design variables. The space mapping concept has been extended to neural-based space mapping for large-signal statistical modeling of nonlinear microwave devices.[9][10] Space mapping is supported by sound convergence theory and is related to the defect-correction approach.[11]

A 2016 state-of-the-art review is devoted to aggressive space mapping.[12] It spans two decades of development and engineering applications. A comprehensive 2021 review paper [13] discusses space mapping in the context of radio frequency and microwave design optimization; in the context of engineering surrogate model, feature-based and cognition-driven design; and in the context of machine learning, intuition, and human intelligence.

The space mapping methodology can also be used to solve inverse problems. Proven techniques include the Linear Inverse Space Mapping (LISM) algorithm,[14] as well as the Space Mapping with Inverse Difference (SM-ID) method.[15]

Category

Space mapping optimization belongs to the class of surrogate-based optimization methods,[16] that is to say, optimization methods that rely on a surrogate model.

Applications

The space mapping technique has been applied in a variety of disciplines including microwave and electromagnetic design, civil and mechanical applications, aerospace engineering, and biomedical research. Some examples:

Simulators

Various simulators can be involved in a space mapping optimization and modeling processes.

Conferences

Three international workshops have focused significantly on the art, the science and the technology of space mapping.

  • First International Workshop on Surrogate Modelling and Space Mapping for Engineering Optimization (Lyngby, Denmark, Nov. 2000)
  • Second International Workshop on Surrogate Modelling and Space Mapping for Engineering Optimization (Lyngby, Denmark, Nov. 2006)
  • Third International Workshop on Surrogate Modelling and Space Mapping for Engineering Optimization (Reykjavik, Iceland, Aug. 2012)

Terminology

There is a wide spectrum of terminology associated with space mapping: ideal model, coarse model, coarse space, fine model, companion model, cheap model, expensive model, surrogate model, low fidelity (resolution) model, high fidelity (resolution) model, empirical model, simplified physics model, physics-based model, quasi-global model, physically expressive model, device under test, electromagnetics-based model, simulation model, computational model, tuning model, calibration model, surrogate model, surrogate update, mapped coarse model, surrogate optimization, parameter extraction, target response, optimization space, validation space, neuro-space mapping, implicit space mapping, output space mapping, port tuning, predistortion (of design specifications), manifold mapping, defect correction, model management, multi-fidelity models, variable fidelity/variable complexity, multigrid method, coarse grid, fine grid, surrogate-driven, simulation-driven, model-driven, feature-based modeling.

See also

References

  1. ↑ 1.0 1.1 J.W. Bandler, "Have you ever wondered about the engineer's mysterious 'feel' for a problem?" IEEE Canadian Review, no. 70, pp. 50-60, Summer 2013. Reprinted in IEEE Microwave Magazine , vol. 19, no. 2, pp.112-122, Mar./Apr. 2018.
  2. ↑ J.W. Bandler, R.M. Biernacki, S.H. Chen, P.A. Grobelny, and R.H. Hemmers, "Space mapping technique for electromagnetic optimization," IEEE Trans. Microwave Theory Tech., vol. 42, no. 12, pp. 2536-2544, Dec. 1994.
  3. ↑ J.W. Bandler, R.M. Biernacki, S.H. Chen, R.H. Hemmers, and K. Madsen,"Electromagnetic optimization exploiting aggressive space mapping," IEEE Trans. Microwave Theory Tech., vol. 43, no. 12, pp. 2874-2882, Dec. 1995.
  4. ↑ M.H. Bakr, J.W. Bandler, R.M. Biernacki, S.H. Chen and K. Madsen, "A trust region aggressive space mapping algorithm for EM optimization," IEEE Trans. Microwave Theory Tech., vol. 46, no. 12, pp. 2412-2425, Dec. 1998.
  5. ↑ M.H. Bakr, J.W. Bandler, M.A. Ismail, J.E. Rayas-Sánchez and Q.J. Zhang, "Neural space mapping EM optimization of microwave structures," IEEE MTT-S Int. Microwave Symp. Digest (Boston, MA, 2000), pp. 879-882.
  6. ↑ J.W. Bandler, Q.S. Cheng, N.K. Nikolova and M.A. Ismail, "Implicit space mapping optimization exploiting preassigned parameters," IEEE Trans. Microwave Theory Tech., vol. 52, no. 1, pp. 378-385, Jan. 2004.
  7. ↑ J.W. Bandler, Q. Cheng, S.A. Dakroury, A.S. Mohamed, M.H. Bakr, K. Madsen and J. Søndergaard, "Space mapping: the state of the art," IEEE Trans. Microwave Theory Tech., vol. 52, no. 1, pp. 337-361, Jan. 2004.
  8. ↑ S. Koziel, J. Meng, J.W. Bandler, M.H. Bakr, and Q.S. Cheng, "Accelerated microwave design optimization with tuning space mapping," IEEE Trans. Microwave Theory Tech., vol. 57, no. 2, pp. 383-394, Feb. 2009.
  9. ↑ L. Zhang, J. Xu, M.C.E. Yagoub, R. Ding, and Q.J. Zhang, "Efficient analytical formulation and sensitivity analysis of neuro-space mapping for nonlinear microwave device modeling," IEEE Trans. Microwave Theory Tech., vol. 53, no. 9, pp. 2752-2767, Sep. 2005.
  10. ↑ L. Zhang, Q.J. Zhang, and J. Wood, "Statistical neuro-space mapping technique for large-signal modeling of nonlinear devices," IEEE Trans. Microwave Theory Tech., vol. 56, no. 11, pp. 2453-2467, Nov. 2008.
  11. ↑ D. Echeverria and P.W. Hemker, "Space mapping and defect correction" Computational Methods in Applied Mathematics, vol. 5, no, 2, pp. 107-136, Jan. 2005.
  12. ↑ J.E. Rayas-Sanchez,"Power in simplicity with ASM: tracing the aggressive space mapping algorithm over two decades of development and engineering applications" , IEEE Microwave Magazine, vol. 17, no. 4, pp. 64-76, April 2016.
  13. ↑ J.E. Rayas-Sánchez, S. Koziel, and J.W. Bandler, “Advanced RF and microwave design optimization: a journey and a vision of future trends,” (invited), IEEE J. Microwaves, vol. 1, no. 1, pp. 481-493, Jan. 2021.
  14. ↑ J.E. Rayas-Sanchez , F. Lara-Rojo and E. Martanez-Guerrero,"A linear inverse space-mapping (LISM) algorithm to design linear and nonlinear RF and microwave circuits", IEEE Trans. Microwave Theory Tech., vol. 53, no. 3, pp. 960-968 2005.
  15. ↑ M. Şimsek and N. Serap Şengör "Solving Inverse Problems by Space Mapping with Inverse Difference Method," Mathematics in Industry, vol. 14, 2010, pp 453-460.
  16. ↑ A.J. Booker, J.E. Dennis, Jr., P.D. Frank, D.B. Serafini, V. Torczon, and M.W. Trosset,"A rigorous framework for optimization of expensive functions by surrogates," Structural Optimization, vol. 17, no. 1, pp. 1-13, Feb. 1999.
  17. ↑ T.D. Robinson, M.S. Eldred, K.E. Willcox, and R. Haimes, "Surrogate-Based Optimization Using Multifidelity Models with Variable Parameterization and Corrected Space Mapping," AIAA Journal, vol. 46, no. 11, November 2008.
  18. ↑ M. Redhe and L. Nilsson, "Optimization of the new Saab 9-3 exposed to impact load using a space mapping technique," Structural and Multidisciplinary Optimization, vol. 27, no. 5, pp. 411-420, July 2004.
  19. ↑ T. Jansson, L. Nilsson, and M. Redhe, "Using surrogate models and response surfaces in structural optimization—with application to crashworthiness design and sheet metal forming," Structural and Multidisciplinary Optimization, vol. 25, no.2, pp 129-140, July 2003.
  20. ↑ G. Crevecoeur, H. Hallez, P. Van Hese, Y. D'Asseler, L. Dupré, and R. Van de Walle,"EEG source analysis using space mapping techniques," Journal of Computational and Applied Mathematics, vol. 215, no. 2, pp. 339-347, May 2008.
  21. ↑ G. Crevecoeur, H. Hallez, P. Van Hese, Y. D'Asseler, L. Dupré, and R. Van de Walle,"A hybrid algorithm for solving the EEG inverse problem from spatio-temporal EEG data," Medical & Biological Engineering & Computing, vol. 46, no. 8, pp. 767-777, August 2008.
  22. ↑ S. Tu, Q.S. Cheng, Y. Zhang, J.W. Bandler, and N.K. Nikolova, "Space mapping optimization of handset antennas exploiting thin-wire models," IEEE Trans. Antennas Propag., vol. 61, no. 7, pp. 3797-3807, July 2013.]
  23. ↑ N. Friedrich, "Space mapping outpaces EM optimization in handset-antenna design," microwaves&rf, Aug. 30, 2013.
  24. ↑ Juan C. Cervantes-González, J. E. Rayas-Sánchez, C. A. López, J. R. Camacho-Pérez, Z. Brito-Brito, and J. L. Chavez-Hurtado,"Space mapping optimization of handset antennas considering EM effects of mobile phone components and human body," Int. J. RF and Microwave CAE, vol. 26, no. 2, pp. 121-128, Feb. 2016.
  25. ↑ Hany L. Abdel-Malek, Abdel-karim S.O. Hassan, Ezzeldin A. Soliman, and Sameh A. Dakroury, "The Ellipsoidal Technique for Design Centering of Microwave Circuits Exploiting Space-Mapping Interpolating Surrogates," IEEE Trans. Microwave Theory Tech., vol. 54, no. 10, October 2006.
  26. ↑ R. Khlissa, S. Vivier, L.A. Ospina Vargas, and G. Friedrich, "Application of Output Space Mapping method for Fast Optimization using Multi-physical Modeling" .
  27. ↑ M. Hintermüller and L.N. Vicente, "Space Mapping for Optimal Control of Partial Differential Equations".
  28. ↑ L. Encica, J. Makarovic, E.A. Lomonova, and A.J.A. Vandenput, "Space mapping optimization of a cylindrical voice coil actuator", IEEE Trans. Ind. Appl., vol. 42, no. 6, pp.1437-1444, 2006.
  29. ↑ G. Crevecoeur, L. Dupre, L. Vandenbossche, and R. Van de Walle, "Reconstruction of local magnetic properties of steel sheets by needle probe methods using space mapping techniques," Journal of Applied Physics, vol. 99, no. 08H905, 2006.
  30. ↑ O. Lass , C. Posch , G. Scharrer and S. Volkwein, "Space mapping techniques for a structural optimization problem governed by the p-Laplace equation" , Optimization Methods and Software, 26:4-5, pp. 617-642, 2011.
  31. ↑ M.A. Ismail, D. Smith, A. Panariello, Y. Wang, and M. Yu, "EM-based design of large-scale dielectric-resonator filters and multiplexers by space mapping," IEEE Trans. Microwave Theory Tech., vol. 52, no. 1, pp. 386-392, Jan. 2004.
  32. ↑ J. Ossorio, J.C. Melgarejo, V.E. Boria, M. Guglielmi, and J.W. Bandler, "On the alignment of low-fidelity and high-fidelity simulation spaces for the design of microwave waveguide filters," IEEE Trans. Microwave Theory Tech., vol. 66, no. 12, pp. 5183-5196, Dec. 2018.
  33. ↑ Q. Zhang, J.W. Bandler, and C. Caloz, "Design of dispersive delay structures (DDSs) formed by coupled C-sections using predistortion with space mapping," IEEE Trans. Microwave Theory Tech., vol. 61, no. 12, pp. 4040-4051, Dec. 2013.
  34. ↑ K. Booth and J. Bandler, "Space mapping for codesigned magnetics: optimization techniques for high-fidelity multidomain design specifications," IEEE Power Electronics Magazine, vol. 7, no. 2, pp. 47-52, Jun. 2020.
  35. ↑ K. Booth, H. Subramanyan, J. Liu, and S.M. Lukic, "Parallel frameworks for robust optimization of medium frequency transformers," IEEE J. Emerging and Selected Topics in Power Electronics, vol. 9, no. 4, pp. 5097-5112, Aug. 2021.
  36. ↑ J.E. Rayas-Sánchez, F.E. Rangel-Patiño, B. Mercado-Casillas, F. Leal-Romo, and J.L. Chávez-Hurtado, "Machine learning techniques and space mapping approaches to enhance signal and power integrity in high-speed links and power delivery networks," 2020 IEEE 11th Latin American Symposium on Circuits & Systems (LASCAS), Feb. 2020.
  37. ↑ F. Pedersen, P. Weitzmann, and S. Svendsen, "Modeling thermally active building components using space mapping," Proceedings of the 7th Symposium on Building Physics in the Nordic Countries, vol. 1, pp. 896-903. The Icelandic Building Research Institute, 2005.



Retrieved from "https://handwiki.org/wiki/index.php?title=Space_mapping&oldid=3148307"