Biology:Aussiedraco

From HandWiki
Revision as of 21:45, 9 February 2024 by NBrushPhys (talk | contribs) (over-write)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Short description: Genus of targaryendraconian pterosaur from the Early Cretaceous

Aussiedraco
Temporal range: Early Cretaceous, 109–103 Ma
Australian pterosaurs.jpeg
Holotype mandibular symphysis shown from above at the top, with other Australian pterosaur fossils
Scientific classification e
Domain: Eukaryota
Kingdom: Animalia
Phylum: Chordata
Order: Pterosauria
Suborder: Pterodactyloidea
Clade: Ornithocheiriformes
Clade: Ornithocheirae
Clade: Targaryendraconia
Family: Targaryendraconidae
Genus: Aussiedraco
Kellner, Rodrigues & Costa, 2011
Type species
Aussiedraco molnari
Kellner, Rodrigues & Costa, 2011

Aussiedraco is a genus of targaryendraconian pterodactyloid pterosaur from the early Cretaceous of Australia .[1]

Description

Holotype from the left, bottom, with other pterosaurs

Aussiedraco is known from holotype QM F10613, a partial mandibular symphysis housed at the Queensland Museum, recovered from rocks of the Toolebuc Formation, about 70 km east of Boulia, western Queensland, dating to Albian stage. It was named by Alexander W.A. Kellner, Taissa Rodrigues and Fabiana R. Costa in 2011 and the type species is Aussiedraco molnari. The generic name is derived from "Aussie", a shortened form of Australia n, and "draco", from Latin meaning dragon. The specific epithet honours Ralph E. Molnar, who first described the specimen in 1980.[2]

The symphysis fragment is 88 millimetres long and very straight and narrow, with a lanceolate not-expanded tip and triangular cross-section. It lacks a keel or crest and is convex on top, with a median narrow deep groove not reaching the tip, but flat at the bottom. As far as can be judged from the empty elliptical tooth-sockets, the lower jaws carry at least five pairs of teeth, which are rather large and become more outwards inclining and procumbent towards the front. Aussiedraco is estimated to have been smaller in size than Mythunga, a pterosaur from the same formation.

Classification

Kellner et al. assigned Aussiedraco to the Pteranodontoidea, a clade roughly containing the same species as the Ornithocheiroidea sensu Unwin. Aussiedraco would be closely related to the Anhangueridae. Pêgas et al. (2019) recovered Aussiedraco as a member of the lanceodontian clade Targaryendraconia.[1]

Below is a cladogram following Pêgas et al. (2019). In the analyses, they recovered Aussiedraco within the family Targaryendraconidae of the larger clade Targaryendraconia.[1]

Ornithocheirae

Ornithocheirus

Targaryendraconia
Targaryendraconidae

Aussiedraco

Barbosania

Targaryendraco

Cimoliopteridae

Aetodactylus

Camposipterus

Cimoliopterus

Anhangueria
Hamipteridae

Hamipterus

Iberodactylus

Anhangueridae

Tropeognathus

Coloborhynchinae

Anhanguerinae

See also

References

  1. 1.0 1.1 1.2 Rodrigo V. Pêgas, Borja Holgado & Maria Eduarda C. Leal (2019) On Targaryendraco wiedenrothi gen. nov. (Pterodactyloidea, Pteranodontoidea, Lanceodontia) and recognition of a new cosmopolitan lineage of Cretaceous toothed pterodactyloids, Historical Biology, doi:10.1080/08912963.2019.1690482
  2. Kellner, Alexander W.A.; Taissa Rodrigues; Fabiana R. Costa (2011). "Short note on a pteranodontoid pterosaur (Pterodactyloidea) from western Queensland, Australia". Anais da Academia Brasileira de Ciências 83 (1): 301–308. doi:10.1590/S0001-37652011000100018. PMID 21437387. http://www.scielo.br/pdf/aabc/v83n1/v83n1a18.pdf. 

Wikidata ☰ Q3193626 entry