Engineering:NeXTcube Turbo
From HandWiki
Revision as of 15:22, 8 April 2022 by imported>JTerm (url)
 | |
| Manufacturer | NeXT |
|---|---|
| Type | Workstation |
| Release date | April 7, 1992[1] |
| Discontinued | 1995 |
| Operating system | NeXTSTEP, OPENSTEP, NetBSD (limited support) |
| CPU | Motorola 68040 @ 33 MHz, 56001 digital signal processor (DSP) |
| Memory | 16–128 MB |
| Display | 1120×832 2-bpp grayscale |
| Dimensions | 1-foot (305 mm) die-cast magnesium cube-shaped case |
| Predecessor | NeXTcube |
The NeXTcube Turbo is a high-end workstation computer developed, manufactured and sold by NeXT. It superseded the earlier NeXTcube workstation and is housed in the same cube-shaped magnesium enclosure. The workstation runs the NeXTSTEP operating system.
Hardware
The NeXTcube Turbo is a development of the earlier NeXTcube. It differs from its predecessor in having a 33 MHz 68040 processor.
The NeXTdimension board can also be used in the NeXTcube Turbo.
There was also a very rare accelerator board known as the Nitro; between 5 and 20 are estimated to have been made. It increased the speed of a NeXTcube Turbo by replacing the standard 33 MHz processor with a 40 MHz one.[2]
Specifications
- Display: 1120×832 17" grayscale MegaPixel Display
- Operating System: NeXTSTEP, OPENSTEP
- CPU: 33 MHz 68040 with integrated floating-point unit
- Digital Signal Processor: 25 MHz Motorola DSP56001
- RAM: 16 MB, expandable to 128 MB (Four 72-pin SIMM slots)
- Floppy Drive: 2.88 MB (optional)
- Hard Drive: 400 MB, 1.4 GB or 2.8 GB SCSI drive
- Expansion: four NeXTbus slots (mainboard uses one slot)
- Size (H × W × D): 12" × 12" × 12"[3]
See also
References
- ↑ NeXT Press release, ...NeXT Ships its "Turbo" NeXTcube On Time...April 7, 1992 - NeXT Computer, Inc.....has begun shipments...NeXTcube Turbo workstation.
- ↑ NeXT Nitro Information
- ↑ NeXTcube brochure
External links
 |  |
